Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. W. Wang et al., “R&D of a Super-compact SLED System at SLAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 39-41. doi:10.18429/JACoW-IPAC2016-MOOCA01
[n] I. Hofmann and O. Boine-Frankenheim, “Stochastic Noise Effects in High Current PIC Simulation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3101-3103. doi:10.18429/JACoW-IPAC2014-THPRO092
[n] H.-W. Glock et al., “Progress of the BESSY VSR Cold String Development and Testing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1434-1436. doi:10.18429/JACoW-IPAC2019-TUPGW019
[n] F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1398-1401.
[n] H. Sakaki et al., “Design of SPring-8 Linac Control System Using Object Oriented Concept”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA07, pp. 2208-2210.
[n] J. M. Nogiec and K. Trombly-Freytag, “Combining Structured and Unstructured Data In A Configurable Web-based Logbook”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP115, pp. 901-903.
[n] S. Andresen, “Optimizing the PETRA IV Girder by Using Bio-Inspired Structures”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 297-301. doi:10.18429/JACoW-MEDSI2018-THOAMA01
[n] H. Hama et al., “Cherenkov Ring to Observe Longitudinal Phase Space of a Low Energy Electron Beam Extracted from RF Gun”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUCNB03, pp. 79-83.
[n] E. Senes et al., “Transverse Emittance Measurement in the CERN Proton Synchrotron in View of Beam Production for the High-Luminosity LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1106-1109. doi:10.18429/JACoW-IPAC2019-MOPTS100
[n] C. M. Bhat et al., “Magnetic Field Measurements of the Main Injector Sextupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P007, pp. 3242-3244.
[n] N. Towne, “Longitudinal Measurements and Simulations of Stretched Bunches in the NSLS VUV Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH150, pp. 3594-3596.
[n] A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1111-1114. doi:10.18429/JACoW-IPAC2016-TUPMB005
[n] K. Suda et al., “Status Report of the Operation of the RIKEN AVF Cyclotron”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA12, pp. 65-67.
[n] D. J. Gibson, G. G. Anderson, C. P. J. Barty, and R. A. Marsh, “Compact X-band Accelerator Controls for a Laser-Compton X-ray Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3996-3998. doi:10.18429/JACoW-IPAC2016-THPOW027
[n] N. Higashi et al., “Low Emittance Lattice for PF-AR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4148-4151. doi:10.18429/JACoW-IPAC2018-THPMF041
[n] R. Chestnut and A. Fisher, “The Bunch Injection Controller for the PEP-II Storage Rings”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper FRBT003, pp. XX-XX.
[n] J. A. Johnstone, V. Kashikhin, N. V. Mokhov, and A. V. Zlobin, “Optics Implications of Implementing Nb3Sn Magnets in the LHC Phase I Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP047, pp. 2626-2628.
[n] M. Tanigaki et al., “Current Status of a Carborne Survey System, KURAMA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA06, pp. 926-929.
[n] T. Dewitte, W. Meert, E. Van Wolputte, and P. Van Trappen, “Anomaly Detection for CERN Beam Transfer Installations Using Machine Learning”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1067. doi:10.18429/JACoW-ICALEPCS2019-WEMPR010
[n] T. Furukawa et al., “Development of Raster Scanning at NIRS-HIMAC”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper G-04, pp. 370-373.
[n] T. O. Raubenheimer and P. Chen, “Ions in the Linacs of Future Linear Colliders”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-10, pp. 630-632.
[n] E. A. Nanni et al., “Toward High-Power High-Gradient Testing of mm-Wave Standing-Wave Accelerating Structures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1224-1227. doi:10.18429/JACoW-IPAC2018-TUZGBE4
[n] T. Yoshimoto et al., “Wide-band Induction Acceleration in the KEK Digital Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1893-1895. doi:10.18429/JACoW-IPAC2014-WEOAB02
[n] D. C. Carey, “Violation of Midplane Symmetry in Bending Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2255-2258.
[n] S. Rajagopalan, “Plasma Focusing of the Final Test Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3555-3558.
[n] M. Ichikawa, H. Fujisawa, Y. Iwashita, Y. Tajima, H. Tongu, and M. Yamada, “Development of Piezoelectric Pulse Gas Valve for Small ECR Ion Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC146, pp. 418-420.
[n] A. F. Pietryla, A. E. Grelick, and W. E. Norum, “Development of a New Phase Detector for the APS Linac”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP031, pp. 468-470.
[n] K. Koyama, A. Aimidura, M. Uesaka, Y. Matsumura, T. Natsui, and M. Yoshida, “Designing of a Phase-mask-type Laser Driven Dielectric Accelerator for Radiobiology”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB095, pp. 1041-1043.
[n] J. A. Johnstone and C. Johnstone, “Prospects for a Muon Spin Resonace Facility in the Fermilab MuCool Test Area”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 474-476. doi:10.18429/JACoW-IPAC2018-MOPML032
[n] M. Yamaga et al., “Event-Synchronized Data-Acquisition System for SPring-8 XFEL”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUB003, pp. 69-71.
[n] J. Marriner, “Review of the Physics, Technology and Practice of Stochastic Beam Cooling”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1383-1388.
[n] T. Ota et al., “Development of the Superconducting Cavity for ILC at TOSHIBA”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO023, pp. 418-420.
[n] Y. Yuri et al., “Formation of a Uniform Ion Beam Using Multipole Magnets”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP082, pp. 3895-3897.
[n] H. Tomizawa et al., “Novel Nondestructive Shot-by-Shot Monitor to Measure 3D Bunch Charge Distribution With a Femtosecond EO-Sampling”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB20, pp. 445-448.
[n] S-C. Kim, N. S. Froemming, D. L. Rubin, and D. Stratakis, “The Muon Injection Simulation Study for the Muon g-2 Experiment at Fermilab”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 803-806. doi:10.18429/JACoW-NAPAC2016-WEPOA46
[n] K. Niki et al., “Beam Transport Design for the Linac System in the INS Radioactive Beam Facility”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-13, pp. 725-727.
[n] W. Chou et al., “Operational Aspects of the Main Injector Large Aperture Quadrupole”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS015, pp. 1685-1687.
[n] D. Stratakis et al., “Analysis of the Transport of Muon Polarization for the Fermilab G-2 Muon Experiment”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1158-1160. doi:10.18429/JACoW-NAPAC2016-THPOA26
[n] P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
[n] S. Jolly et al., “Data Acquisition and Error Analysis for Pepperpot Emittance Measurements”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOA03, pp. 421-423.
[n] M. P. J. Gaudreau, J. A. Casey, T. J. Hawkey, M. A. Kempkes, J. M. Mulvaney, and I. S. Roth, “A Solid-State Opening Switch for Crowbar Replacement”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH107, pp. 1459-1461.
[n] Y. Fuwa, S. Ikeda, M. Kumaki, Y. Iwashita, T. Kanesue, and M. Okamura, “Beam Dynamics of Multi Charge State Ions in RFQ Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP112, pp. 317-319.
[n] M. J. de Loos, O. J. Luiten, and S. B. van der Geer, “Spacecharge Models in the General Particle Tracer (GPT) Code”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP092, pp. 4519-4519.
[n] N. Nakamura, T. Koseki, T. Shibuya, H. Takaki, and Y. Kamiya, “Three-Dimensional Magnetic Field Analysis of a Variably Polarizing Undulator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH310, pp. 2787-2789.
[n] N. C. Bhattacharya, “Improving the Energy Resolution by ''Dispersion Matching'' and ''Reduction of Kinematic Broadening''”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G1-06, pp. 451-452.
[n] T. Denis, K.-J. Boller, and P. J. M. van der Slot, “Experimental Design of a Single Beam Photonic Free-Electron Laser”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC82, pp. 431-434.
[n] M. Muto et al., “A Beam Diagnostic System Using SR for JLC-ATF”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-77, pp. 884-886.
[n] V. K. Senecha and M. Kawai, “Target Assembly Design and Neutronics Study for Indian Spallation Neutron Source Using NMTC/JAM Code”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA111, pp. 797-799.
[n] M. G. Billing et al., “Dependence of the Coupling of Dipole Motion From Bunch to Bunch Caused by Electron Clouds at CesrTA Due to Variations in Bunch Length and Chromaticity”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 538-541. doi:10.18429/JACoW-NAPAC2016-TUPOB22
[n] C. Gattuso, M. E. Convery, and M. J. Syphers, “Optimization of Integrated Luminosity in the Tevatron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4RAC03, pp. 88-90.
[n] Y. Okayasu et al., “Feasibility Study for a Single-Shot 3D Electron Bunch Charge Distribution Monitor with a Polarized Probe Laser at SPring-8 Photoinjector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD68, pp. 464-466.
[n] M. Titberidze, A. W. Hunt, D. P. Wells, and Y. Kim, “Design of an L-Band RF Photoinjector for the Idaho Accelerator Center 44 MeV Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD079, pp. 1584-1586.
[n] J. A. Crittenden, Y. Li, S. Poprocki, and J. E. San Soucie, “Electron Cloud Simulations for the Low-Emittance Upgrade at the Cornell Electron Storage Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 542-545. doi:10.18429/JACoW-NAPAC2016-TUPOB23
[n] D. C. Carey, “The Effect of Errors in Charged Particle Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1146-1149.
[n] A. Kiyomichi et al., “Beam Spill Control for the J-PARC Slow Extraction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB022, pp. 3933-3935.
[n] J. M. Nogiec and K. Trombly-Freytag, “Applying Service-Oriented Architecture to Archiving Data in Control and Monitoring Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 461-464. doi:10.18429/JACoW-ICALEPCS2017-TUPHA036
[n] K. Arakawa et al., “Status Report on the JAERI AVF Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-07, pp. 617-620.
[n] B. D. Muratori et al., “Recent Results from the EMMA Experiment”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO054, pp. 1988-1990.
[n] Z. Zhang, Y. Ding, and X. Huang, “Model-based Algorithm to Tune the LCLS Optics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 763-765. doi:10.18429/JACoW-IPAC2016-MOPOW022
[n] R. de Villepoix, M. Lefrancois, J. Montuclard, and C. Rouaud, “Latest Developments on Valve Seat-Seal Assembly”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2526-2529.
[n] S. E. Posen, M. Liepe, and N. R. A. Valles, “Coupled Electromagnetic-Thermal-Mechanical Simulations of Superconducting RF Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC065, pp. 3040-3042.
[n] J. I. M. Botman, G. J. H. Brussaard, F. B. Kiewiet, O. J. Luiten, and M. J. van der Wiel, “A DC/RF Gun for Generating Ultra-short High-brightness Electron Bunches”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A02, pp. 1660-1662.
[n] K. Sakaue, R. Kuroda, Y. Taira, M. Nishida, M. Washio, and J. Urakawa, “Generation of a Coherent Cherenkov Radiation by using Electron Bunch Tilting”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1870-1872. doi:10.18429/JACoW-IPAC2016-TUPOW047
[n] F. Sohn, W. Ehsan, G. Giovanetti, D. Goeries, I. Karpics, and K. Sukharnikov, “Automatic Configuration of Motors at the European XFEL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1358-1361. doi:10.18429/JACoW-ICALEPCS2023-THPDP024
[n] T. Koseki et al., “Designs and Measurements of Prototype Magnets for the High-Brilliance Synchrotron Light Source at the University of Tokyo”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH303, pp. 3609-3611.
[n] W. Yokota et al., “Design of Beam Chopping System for JAERI AVF Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-04, pp. 388-391.
[n] X.-M. Mar?®chal, Y. Asano, T. Bizen, and H. Kitamura, “65 MEV Neutron Irradiation of ND-FE-B Permanent Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH135, pp. 3116-3118.
[n] H. Suzuki et al., “ECR Ion Source for the KEK All-ion Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC156, pp. 442-444.
[n] M. Torikoshi, M. Endo, M. Kumada, K. Noda, S. Yamada, and K. Kawachi, “A Plan of Synchrotron Light Source Dedicated to Medical Applications at NIRS”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D016, pp. 707-709.
[n] F. V. Hartemann et al., “Development of a Precision Tunable Gamma-Ray Source Driven by a Compact X-Band Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP030, pp. 2333-2335.
[n] A. Freyberger, P. Degtiarenko, D. W. Dotson, and V. P. Popov, “Radiation-hard Beam Position Detector for Use in the Accelerator Dump Lines”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM032, pp. XX-XX.
[n] K. Kasamsook et al., “Study on Compact DC Electron Gun using Single Crystal Cathode of LaB6”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA052, pp. 181-183.
[n] S. Hojo et al., “Design Study of Magnetic Channel at NIRS-AVF930”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP081, pp. 215-217.
[n] J. A. Uythoven et al., “Changes to the LHC Beam Dumping System for LHC Run 2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 134-137. doi:10.18429/JACoW-IPAC2014-MOPRO030
[n] T. J. Roberts, “LinguaFranca - A Graphical User Interface for Accelerator Modeling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC083, pp. 331-333.
[n] G. D. Charnley et al., “Developments in Magnet Power Converters at the SRS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF068, pp. 1759-1761.
[n] N. S. Sereno, F. Lenkszus, and M. Lill, “Advanced Photon Source Booster Synchrotron Beam Position Monitor Upgrade and Applications”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB010, pp. 2435-2437.
[n] S. G. Anderson et al., “Design of a 250 MeV, X-Band Photoinjector Linac for a Precision Compton-Scattering Based Gamma-Ray Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP043, pp. 1186-1188.
[n] R. Bartolini, A. Bazzani, M. Giovannozzi, W. Scandale, and E. Todesco, “Algorithms for a Precise Determination of the Betatron Tune”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP018G, pp. 1329-1331.
[n] H. Okuno et al., “Operational Experience and Upgrade Plans of the RIBF Accelerator Complex”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-Cyclotrons2016-MOA01
[n] K. Sasa et al., “Construction of the 6 MV Tandem Accelerator System for Various Ion Beam Applications at the University of Tsukuba”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper THM2C02, pp. 285-287.
[n] P. Chen, R. Yi, and D. Yu, “Beam Emittance Simulations for a High Gradient Pulsed DC/RF Gun”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS086, pp. 3684-3686.
For LaTeX
Use Complete Form
For BibTeX
References
- J. W. Wang et al., “R&D of a Super-compact SLED System at SLAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 39-41.
- I. Hofmann and O. Boine-Frankenheim, “Stochastic Noise Effects in High Current PIC Simulation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3101-3103.
- H.-W. Glock et al., “Progress of the BESSY VSR Cold String Development and Testing”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1434-1436.
- F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1398-1401.
- H. Sakaki et al., “Design of SPring-8 Linac Control System Using Object Oriented Concept”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA07, pp. 2208-2210.
- J. M. Nogiec and K. Trombly-Freytag, “Combining Structured and Unstructured Data In A Configurable Web-based Logbook”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP115, pp. 901-903.
- S. Andresen, “Optimizing the PETRA IV Girder by Using Bio-Inspired Structures”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 297-301.
- H. Hama et al., “Cherenkov Ring to Observe Longitudinal Phase Space of a Low Energy Electron Beam Extracted from RF Gun”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUCNB03, pp. 79-83.
- E. Senes et al., “Transverse Emittance Measurement in the CERN Proton Synchrotron in View of Beam Production for the High-Luminosity LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1106-1109.
- C. M. Bhat et al., “Magnetic Field Measurements of the Main Injector Sextupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P007, pp. 3242-3244.
- N. Towne, “Longitudinal Measurements and Simulations of Stretched Bunches in the NSLS VUV Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH150, pp. 3594-3596.
- A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1111-1114.
- K. Suda et al., “Status Report of the Operation of the RIKEN AVF Cyclotron”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA12, pp. 65-67.
- D. J. Gibson, G. G. Anderson, C. P. J. Barty, and R. A. Marsh, “Compact X-band Accelerator Controls for a Laser-Compton X-ray Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3996-3998.
- N. Higashi et al., “Low Emittance Lattice for PF-AR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4148-4151.
- R. Chestnut and A. Fisher, “The Bunch Injection Controller for the PEP-II Storage Rings”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper FRBT003, pp. XX-XX.
- J. A. Johnstone, V. Kashikhin, N. V. Mokhov, and A. V. Zlobin, “Optics Implications of Implementing Nb3Sn Magnets in the LHC Phase I Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP047, pp. 2626-2628.
- M. Tanigaki et al., “Current Status of a Carborne Survey System, KURAMA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA06, pp. 926-929.
- T. Dewitte, W. Meert, E. Van Wolputte, and P. Van Trappen, “Anomaly Detection for CERN Beam Transfer Installations Using Machine Learning”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1067.
- T. Furukawa et al., “Development of Raster Scanning at NIRS-HIMAC”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper G-04, pp. 370-373.
- T. O. Raubenheimer and P. Chen, “Ions in the Linacs of Future Linear Colliders”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-10, pp. 630-632.
- E. A. Nanni et al., “Toward High-Power High-Gradient Testing of mm-Wave Standing-Wave Accelerating Structures”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1224-1227.
- T. Yoshimoto et al., “Wide-band Induction Acceleration in the KEK Digital Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1893-1895.
- D. C. Carey, “Violation of Midplane Symmetry in Bending Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2255-2258.
- S. Rajagopalan, “Plasma Focusing of the Final Test Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3555-3558.
- M. Ichikawa, H. Fujisawa, Y. Iwashita, Y. Tajima, H. Tongu, and M. Yamada, “Development of Piezoelectric Pulse Gas Valve for Small ECR Ion Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC146, pp. 418-420.
- A. F. Pietryla, A. E. Grelick, and W. E. Norum, “Development of a New Phase Detector for the APS Linac”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP031, pp. 468-470.
- K. Koyama, A. Aimidura, M. Uesaka, Y. Matsumura, T. Natsui, and M. Yoshida, “Designing of a Phase-mask-type Laser Driven Dielectric Accelerator for Radiobiology”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB095, pp. 1041-1043.
- J. A. Johnstone and C. Johnstone, “Prospects for a Muon Spin Resonace Facility in the Fermilab MuCool Test Area”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 474-476.
- M. Yamaga et al., “Event-Synchronized Data-Acquisition System for SPring-8 XFEL”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUB003, pp. 69-71.
- J. Marriner, “Review of the Physics, Technology and Practice of Stochastic Beam Cooling”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1383-1388.
- T. Ota et al., “Development of the Superconducting Cavity for ILC at TOSHIBA”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO023, pp. 418-420.
- Y. Yuri et al., “Formation of a Uniform Ion Beam Using Multipole Magnets”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP082, pp. 3895-3897.
- H. Tomizawa et al., “Novel Nondestructive Shot-by-Shot Monitor to Measure 3D Bunch Charge Distribution With a Femtosecond EO-Sampling”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB20, pp. 445-448.
- S-C. Kim, N. S. Froemming, D. L. Rubin, and D. Stratakis, “The Muon Injection Simulation Study for the Muon g-2 Experiment at Fermilab”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 803-806.
- K. Niki et al., “Beam Transport Design for the Linac System in the INS Radioactive Beam Facility”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-13, pp. 725-727.
- W. Chou et al., “Operational Aspects of the Main Injector Large Aperture Quadrupole”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS015, pp. 1685-1687.
- D. Stratakis et al., “Analysis of the Transport of Muon Polarization for the Fermilab G-2 Muon Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1158-1160.
- P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
- S. Jolly et al., “Data Acquisition and Error Analysis for Pepperpot Emittance Measurements”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper WEOA03, pp. 421-423.
- M. P. J. Gaudreau, J. A. Casey, T. J. Hawkey, M. A. Kempkes, J. M. Mulvaney, and I. S. Roth, “A Solid-State Opening Switch for Crowbar Replacement”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH107, pp. 1459-1461.
- Y. Fuwa, S. Ikeda, M. Kumaki, Y. Iwashita, T. Kanesue, and M. Okamura, “Beam Dynamics of Multi Charge State Ions in RFQ Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP112, pp. 317-319.
- M. J. de Loos, O. J. Luiten, and S. B. van der Geer, “Spacecharge Models in the General Particle Tracer (GPT) Code”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP092, pp. 4519-4519.
- N. Nakamura, T. Koseki, T. Shibuya, H. Takaki, and Y. Kamiya, “Three-Dimensional Magnetic Field Analysis of a Variably Polarizing Undulator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH310, pp. 2787-2789.
- N. C. Bhattacharya, “Improving the Energy Resolution by ''Dispersion Matching'' and ''Reduction of Kinematic Broadening''”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G1-06, pp. 451-452.
- T. Denis, K.-J. Boller, and P. J. M. van der Slot, “Experimental Design of a Single Beam Photonic Free-Electron Laser”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC82, pp. 431-434.
- M. Muto et al., “A Beam Diagnostic System Using SR for JLC-ATF”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-77, pp. 884-886.
- V. K. Senecha and M. Kawai, “Target Assembly Design and Neutronics Study for Indian Spallation Neutron Source Using NMTC/JAM Code”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA111, pp. 797-799.
- M. G. Billing et al., “Dependence of the Coupling of Dipole Motion From Bunch to Bunch Caused by Electron Clouds at CesrTA Due to Variations in Bunch Length and Chromaticity”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 538-541.
- C. Gattuso, M. E. Convery, and M. J. Syphers, “Optimization of Integrated Luminosity in the Tevatron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO4RAC03, pp. 88-90.
- Y. Okayasu et al., “Feasibility Study for a Single-Shot 3D Electron Bunch Charge Distribution Monitor with a Polarized Probe Laser at SPring-8 Photoinjector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD68, pp. 464-466.
- M. Titberidze, A. W. Hunt, D. P. Wells, and Y. Kim, “Design of an L-Band RF Photoinjector for the Idaho Accelerator Center 44 MeV Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD079, pp. 1584-1586.
- J. A. Crittenden, Y. Li, S. Poprocki, and J. E. San Soucie, “Electron Cloud Simulations for the Low-Emittance Upgrade at the Cornell Electron Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 542-545.
- D. C. Carey, “The Effect of Errors in Charged Particle Beams”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1146-1149.
- A. Kiyomichi et al., “Beam Spill Control for the J-PARC Slow Extraction”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB022, pp. 3933-3935.
- J. M. Nogiec and K. Trombly-Freytag, “Applying Service-Oriented Architecture to Archiving Data in Control and Monitoring Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 461-464.
- K. Arakawa et al., “Status Report on the JAERI AVF Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-07, pp. 617-620.
- B. D. Muratori et al., “Recent Results from the EMMA Experiment”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO054, pp. 1988-1990.
- Z. Zhang, Y. Ding, and X. Huang, “Model-based Algorithm to Tune the LCLS Optics”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 763-765.
- R. de Villepoix, M. Lefrancois, J. Montuclard, and C. Rouaud, “Latest Developments on Valve Seat-Seal Assembly”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2526-2529.
- S. E. Posen, M. Liepe, and N. R. A. Valles, “Coupled Electromagnetic-Thermal-Mechanical Simulations of Superconducting RF Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC065, pp. 3040-3042.
- J. I. M. Botman, G. J. H. Brussaard, F. B. Kiewiet, O. J. Luiten, and M. J. van der Wiel, “A DC/RF Gun for Generating Ultra-short High-brightness Electron Bunches”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP2A02, pp. 1660-1662.
- K. Sakaue, R. Kuroda, Y. Taira, M. Nishida, M. Washio, and J. Urakawa, “Generation of a Coherent Cherenkov Radiation by using Electron Bunch Tilting”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1870-1872.
- F. Sohn, W. Ehsan, G. Giovanetti, D. Goeries, I. Karpics, and K. Sukharnikov, “Automatic Configuration of Motors at the European XFEL”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP024, pp. 1358-1361.
- T. Koseki et al., “Designs and Measurements of Prototype Magnets for the High-Brilliance Synchrotron Light Source at the University of Tokyo”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH303, pp. 3609-3611.
- W. Yokota et al., “Design of Beam Chopping System for JAERI AVF Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-04, pp. 388-391.
- X.-M. Mar?®chal, Y. Asano, T. Bizen, and H. Kitamura, “65 MEV Neutron Irradiation of ND-FE-B Permanent Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH135, pp. 3116-3118.
- H. Suzuki et al., “ECR Ion Source for the KEK All-ion Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC156, pp. 442-444.
- M. Torikoshi, M. Endo, M. Kumada, K. Noda, S. Yamada, and K. Kawachi, “A Plan of Synchrotron Light Source Dedicated to Medical Applications at NIRS”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D016, pp. 707-709.
- F. V. Hartemann et al., “Development of a Precision Tunable Gamma-Ray Source Driven by a Compact X-Band Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP030, pp. 2333-2335.
- A. Freyberger, P. Degtiarenko, D. W. Dotson, and V. P. Popov, “Radiation-hard Beam Position Detector for Use in the Accelerator Dump Lines”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM032, pp. XX-XX.
- K. Kasamsook et al., “Study on Compact DC Electron Gun using Single Crystal Cathode of LaB6”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA052, pp. 181-183.
- S. Hojo et al., “Design Study of Magnetic Channel at NIRS-AVF930”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP081, pp. 215-217.
- J. A. Uythoven et al., “Changes to the LHC Beam Dumping System for LHC Run 2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 134-137.
- T. J. Roberts, “LinguaFranca - A Graphical User Interface for Accelerator Modeling”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC083, pp. 331-333.
- G. D. Charnley et al., “Developments in Magnet Power Converters at the SRS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF068, pp. 1759-1761.
- N. S. Sereno, F. Lenkszus, and M. Lill, “Advanced Photon Source Booster Synchrotron Beam Position Monitor Upgrade and Applications”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB010, pp. 2435-2437.
- S. G. Anderson et al., “Design of a 250 MeV, X-Band Photoinjector Linac for a Precision Compton-Scattering Based Gamma-Ray Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP043, pp. 1186-1188.
- R. Bartolini, A. Bazzani, M. Giovannozzi, W. Scandale, and E. Todesco, “Algorithms for a Precise Determination of the Betatron Tune”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP018G, pp. 1329-1331.
- H. Okuno et al., “Operational Experience and Upgrade Plans of the RIBF Accelerator Complex”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. XX-XX.
- K. Sasa et al., “Construction of the 6 MV Tandem Accelerator System for Various Ion Beam Applications at the University of Tsukuba”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper THM2C02, pp. 285-287.
- P. Chen, R. Yi, and D. Yu, “Beam Emittance Simulations for a High Gradient Pulsed DC/RF Gun”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS086, pp. 3684-3686.
Back to search