Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Orlati et al., “Design Strategies in the Development of the Italian Single-dish Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 330-333. doi:10.18429/JACoW-ICALEPCS2015-MOPGF110
[n] P. J. S. Barratt, A. P. Letchford, M. Perkins, and R. Sidlow, “A New Remote Control and Monitoring System for the ISIS Ion Source on the 665 kV DC Accelerating Platform”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP081L, pp. 1806-1808.
[n] V. Morozov, A. Hoover, D. Stratakis, F. Pilat, N. Evans, and S. Cousineau, “Proposed muon collider R&D at SNS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2578-2581. doi:10.18429/JACoW-IPAC2024-WEPR39
[n] S. S. Gilardoni et al., “First Results for the Beam Commissioning of the CERN Multi-Turn Extraction”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP022, pp. 1578-1580.
[n] P. Ausset, T. Aniel, C. Fougeron, and J. M. Lagniel, “Large Frequency Swing RF Cavities for MIMAS”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 944-947.
[n] A. R. Tumanian and R. V. Tumanian, “Technique of Race-Track Microtron Injection into Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 251-255.
[n] N. Added, B. E. Clifft, and K. W. Shepard, “Upgraded Phase Control System for Superconducting Low-Velocity Accelerating Structures”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-49, pp. 181-183.
[n] F. Brandeberry, G. Gunderson, M. Knott, and A. Rauchas, “A Mini-Computer Based DIgital RF Control System for the ZGS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1756-1759.
[n] T. L. Tomei, N. F. Clark, and D. J. Liska, “A Modular Instrumentation Panel for Monitoring the Status of Accelerator Cooling Systems at Los Alamos”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 268-270.
[n] G. Mamaev, T. Latypov, S. Mamaev, S. Puchkov, A. Shcherbakov, and I. Tenyakov, “150 kV Magnetic Pulse Compressor”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P094, pp. 1311-1312.
[n] F. Blas et al., “Digital Beam Controls for Synchrotrons and Storage Rings in the CERN PS Complex”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1568-1571.
[n] D. Leitner et al., “Status of the ALS-U accumulator ring installation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 988-990. doi:10.18429/JACoW-IPAC2023-MOPM009
[n] B. Nash et al., “Online Models for X-Ray Beamlines”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 170-173. doi:10.18429/JACoW-NAPAC2022-MOPA57
[n] O. V. Sumaneev, G. I. Britvich, M. Y. Kostin, and V. A. Pikalov, “Estimation of the Efficiency of Biological Shielding for the Circular Hall of U-70 Accelerator at IHEP”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA38, pp. 118-119.
[n] S. Schlenker, B. Farnham, P. P. Nikiel, C.-V. Soare, D. Abalo Miron, and V. Filimonov, “quasar - A Generic Framework for Rapid Development of OPC UA Servers”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 602-605. doi:10.18429/JACoW-ICALEPCS2015-WEB3O02
[n] S. Chen, R. B. Hogan, A. Michalczyk, A. C. Starritt, and Y. E. Tan, “Hardware and Firmware Development for Enhanced Orbit Diagnostics at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3802-3804. doi:10.18429/JACoW-IPAC2019-THPRB004
[n] S. Imajo et al., “Development of Slow Neutron Accelerator for Rebunching Pulsed Neutrons”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP092, pp. 1062-1064.
[n] Ye. Ivanisenko et al., “Photo Injector Cathode Laser Beam Intensity and Pointing Position Diagnostics at PITZ”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC02, pp. 147-149.
[n] T. Momose, H. Ishimaru, K. Mori, T. Shintake, and T. Suetsugu, “Aluminum Allloy DC Separators Using Heat Pipes for a ee- Collider, TRISTAN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1552-1555.
[n] J. Kim and H. Blosser, “Optimized Magnet for a 250 MeV Proton Radiotherapy Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-26, pp. XX-XX.
[n] S. M. Liuzzo et al., “The ESRF-EBS Simulator: A Commissioning Booster”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 132-137. doi:10.18429/JACoW-ICALEPCS2021-MOPV012
[n] A. Z. Babaian et al., “Septum Magnet for Electron Slow Extraction from the Yerevan Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2146-2149.
[n] S. Wunderlich, R. M. B?Âhm, C. Dimopoulou, W. Maier, R. Menges, and C. Peschke, “Progress of the RF-System Developments for Stochastic Cooling at the FAIR Collector Ring”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUPF07, pp. 108-111.
[n] C. Narug et al., “Successful cleanroom installation of PIP-II SSR2 coupler using robotic arm”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 168-170. doi:10.18429/JACoW-LINAC2024-MOPB056
[n] J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 93-96. doi:10.18429/JACoW-ICAP2015-WEP14
[n] V. Papadimitriou, R. Andrews, M. R. Campbell, A. Z. Chen, S. C. Childress, and C. D. Moore, “Status of the Design of the LBNE Neutrino Beamline”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD039, pp. 451-453.
[n] T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 389-392. doi:10.18429/JACoW-ICALEPCS2015-MOPGF132
[n] J. P. Koutchouk and J. Poole, “Data Management for LEP Control”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 683-686.
[n] A. A. S. Awwal, S. W. Ferguson, B. Horowitz, V. J. Miller Kamm, C. A. Reynolds, and K. C. Wilhelmsen, “Automatic Alignment System for the National Ignition Facility”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROAA02, pp. 486-490.
[n] S. Noguchi et al., “Status of Tristan Superconducting RF Program”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E10, pp. XX-XX.
[n] S. I. Tomin, A. Belkov, V. Korchuganov, I. Kuzmin, and K. Kuznetsov, “High Voltage Generators Upgrade of Siberia-2 Injection System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 292-294. doi:10.18429/JACoW-IPAC2014-MOPRO087
[n] M. Canetti et al., “Design, Manufacturing and Integration of LHC Cryostat Components: an Example of a Collaboration between CERN and Industry”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH169, pp. 3191-3193.
[n] M. Plesko and G. Tkacik, “Where and What Exactly is 'Knowledge' in Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE101, pp. XX-XX.
[n] R. Junqueira Le?úo, H. Geraissate, R. Oliveira Neto, F. Rodrigues, and G. R. Rovigatti de Oliveira, “Results of the First Alignment Run for Sirius”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3728-3731. doi:10.18429/JACoW-IPAC2021-THXB06
For LaTeX
Use Complete Form
For BibTeX
References
- A. Orlati et al., “Design Strategies in the Development of the Italian Single-dish Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 330-333.
- P. J. S. Barratt, A. P. Letchford, M. Perkins, and R. Sidlow, “A New Remote Control and Monitoring System for the ISIS Ion Source on the 665 kV DC Accelerating Platform”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP081L, pp. 1806-1808.
- V. Morozov, A. Hoover, D. Stratakis, F. Pilat, N. Evans, and S. Cousineau, “Proposed muon collider R&D at SNS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR39, pp. 2578-2581.
- S. S. Gilardoni et al., “First Results for the Beam Commissioning of the CERN Multi-Turn Extraction”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP022, pp. 1578-1580.
- P. Ausset, T. Aniel, C. Fougeron, and J. M. Lagniel, “Large Frequency Swing RF Cavities for MIMAS”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 944-947.
- A. R. Tumanian and R. V. Tumanian, “Technique of Race-Track Microtron Injection into Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 251-255.
- N. Added, B. E. Clifft, and K. W. Shepard, “Upgraded Phase Control System for Superconducting Low-Velocity Accelerating Structures”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-49, pp. 181-183.
- F. Brandeberry, G. Gunderson, M. Knott, and A. Rauchas, “A Mini-Computer Based DIgital RF Control System for the ZGS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1756-1759.
- T. L. Tomei, N. F. Clark, and D. J. Liska, “A Modular Instrumentation Panel for Monitoring the Status of Accelerator Cooling Systems at Los Alamos”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 268-270.
- G. Mamaev, T. Latypov, S. Mamaev, S. Puchkov, A. Shcherbakov, and I. Tenyakov, “150 kV Magnetic Pulse Compressor”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P094, pp. 1311-1312.
- F. Blas et al., “Digital Beam Controls for Synchrotrons and Storage Rings in the CERN PS Complex”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1568-1571.
- D. Leitner et al., “Status of the ALS-U accumulator ring installation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM009, pp. 988-990.
- B. Nash et al., “Online Models for X-Ray Beamlines”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 170-173.
- O. V. Sumaneev, G. I. Britvich, M. Y. Kostin, and V. A. Pikalov, “Estimation of the Efficiency of Biological Shielding for the Circular Hall of U-70 Accelerator at IHEP”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA38, pp. 118-119.
- S. Schlenker, B. Farnham, P. P. Nikiel, C.-V. Soare, D. Abalo Miron, and V. Filimonov, “quasar - A Generic Framework for Rapid Development of OPC UA Servers”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 602-605.
- S. Chen, R. B. Hogan, A. Michalczyk, A. C. Starritt, and Y. E. Tan, “Hardware and Firmware Development for Enhanced Orbit Diagnostics at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3802-3804.
- S. Imajo et al., “Development of Slow Neutron Accelerator for Rebunching Pulsed Neutrons”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP092, pp. 1062-1064.
- Ye. Ivanisenko et al., “Photo Injector Cathode Laser Beam Intensity and Pointing Position Diagnostics at PITZ”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC02, pp. 147-149.
- T. Momose, H. Ishimaru, K. Mori, T. Shintake, and T. Suetsugu, “Aluminum Allloy DC Separators Using Heat Pipes for a ee- Collider, TRISTAN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1552-1555.
- J. Kim and H. Blosser, “Optimized Magnet for a 250 MeV Proton Radiotherapy Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-26, pp. XX-XX.
- S. M. Liuzzo et al., “The ESRF-EBS Simulator: A Commissioning Booster”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 132-137.
- A. Z. Babaian et al., “Septum Magnet for Electron Slow Extraction from the Yerevan Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2146-2149.
- S. Wunderlich, R. M. B?Âhm, C. Dimopoulou, W. Maier, R. Menges, and C. Peschke, “Progress of the RF-System Developments for Stochastic Cooling at the FAIR Collector Ring”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper TUPF07, pp. 108-111.
- C. Narug et al., “Successful cleanroom installation of PIP-II SSR2 coupler using robotic arm”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 168-170.
- J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 93-96.
- V. Papadimitriou, R. Andrews, M. R. Campbell, A. Z. Chen, S. C. Childress, and C. D. Moore, “Status of the Design of the LBNE Neutrino Beamline”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD039, pp. 451-453.
- T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 389-392.
- J. P. Koutchouk and J. Poole, “Data Management for LEP Control”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 683-686.
- A. A. S. Awwal, S. W. Ferguson, B. Horowitz, V. J. Miller Kamm, C. A. Reynolds, and K. C. Wilhelmsen, “Automatic Alignment System for the National Ignition Facility”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper ROAA02, pp. 486-490.
- S. Noguchi et al., “Status of Tristan Superconducting RF Program”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E10, pp. XX-XX.
- S. I. Tomin, A. Belkov, V. Korchuganov, I. Kuzmin, and K. Kuznetsov, “High Voltage Generators Upgrade of Siberia-2 Injection System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 292-294.
- M. Canetti et al., “Design, Manufacturing and Integration of LHC Cryostat Components: an Example of a Collaboration between CERN and Industry”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH169, pp. 3191-3193.
- M. Plesko and G. Tkacik, “Where and What Exactly is 'Knowledge' in Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE101, pp. XX-XX.
- R. Junqueira Le?úo, H. Geraissate, R. Oliveira Neto, F. Rodrigues, and G. R. Rovigatti de Oliveira, “Results of the First Alignment Run for Sirius”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3728-3731.
Back to search