Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. R. Steerenberg, J.-P. Burnet, M. Giovannozzi, O. Michels, E. M?®tral, and B. Vandorpe, “CERN Proton Synchrotron Working Point Control Using an Improved Version of the Pole-face-windings and Figure-of-eight Loop Powering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH097, pp. 264-266.
[n] S. Stuchebrov, A. A. Bulavskaya, Yu. M. Cherepennikov, A. A. Grigorieva, and I. A. Miloichikova, “Concept of Scanning Detector for Measurement of Ejected Medical Hadron Beam Profile”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA35, unpublished.
[n] R. Brinkmann, “TESLA Linear Collider Design and R&D Status”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MO202, pp. 11-15.
[n] G. R. Lambertson, K.-J. Kim, and F. V. Voelker, “The Slotted Coax as a Beam Electrode”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2158-2161.
[n] T. Kamitani et al., “Positron Injector Linac Upgrade for SuperKEKB”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB002, pp. 177-179.
[n] W. Barry and G. R. Lambertson, “Peturbation Method for the Measurement of Longitudinal and Transverse Beam Impedance”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1602-1605.
[n] M. Katoh et al., “Microfabrication of Relativistic Electron Beam by Laser and its Application to THz Coherent Synchrotron Radiation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC041, pp. 163-165.
[n] E. Daly et al., “JLab Cryomodule Assembly Infrastructure Modifications for LCLS-II”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB113, pp. 898-901.
[n] S. Kanaeda, H. Fukuma, H. Ishii, K. Mori, and M. Tobiyama, “Application of Libera Brilliance+ to Special Purpose BPMs in SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3544-3546. doi:10.18429/JACoW-IPAC2014-THPME129
[n] R. M. Bergmann et al., “Verification of the Neutron Mirror Capabilities in MCNPX via Gold Foil Measurements at the EIGER Instrument Beamline at the Swiss Spallation Neutron Source (SINQ)”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3949-3951. doi:10.18429/JACoW-IPAC2015-THPF102
[n] J. Hammer, M. Magrans de Abril, and C.-E. Wulz, “Interconnection Test Framework for the CMS Level-1 Trigger System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS001, pp. 973-976.
[n] J. L. Fricke, B. Piosczyk, and J. E. Vetter, “Measurements on the First Section of the Superconducting Proton Linac at Karlsruhe”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper F06, pp. 151-155.
[n] M. G. Rao, “CEBAF Linac Cryogenic Instrumentation Requirements and a Review of the Available Sensors”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-17, pp. 348-350.
[n] S. An, Y.-S. Cho, B. H. Choi, and C. Gao, “PEFP HOM Coupler Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN055, pp. 2161-2163.
[n] M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
[n] G. Sterbini et al., “Performance of Transverse Beam Splitting and Extraction at the CERN Proton Synchrotron in the Framework of Multi-turn Extraction”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3492-3495. doi:10.18429/JACoW-IPAC2016-THPMR043
[n] G. Ciovati et al., “RF and mechanical design of a 915 MHz SRF cavity for conduction-cooled cryomodules”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 732-735. doi:10.18429/JACoW-LINAC2024-THPB046
[n] M. Fedurin, B. Craft, and G. Vignola, “CAMD Low Beta Configuration for 7 Tesla Wiggler”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG018, pp. 1053-1055.
[n] B. E. Fischer and R. Spohr, “Invited Paper: Production of Microstructures by Heavy Ions”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-02, pp. 555-565.
[n] V. Talanov et al., “Thermal Neutron Beam Characterization at the HRPT Instrument at the Swiss Spallation Neutron Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2134-2136. doi:10.18429/JACoW-IPAC2014-WEPRO077
[n] J. E. Theroux et al., “A ÔÇÿShort PortÔÇÖ Beamline For Mounting Custom Targets To A Ge PettraceÔäó Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 361-366.
[n] M. Yoshida et al., “Generation and Acceleration of Low-Emittance, High-Current Electron Beams for SuperKEKB”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOB03, pp. 21-25.
[n] N. Ohuchi et al., “Design and Construction of the QC2 Superconducting Magnets in the SuperKEKB IR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1174-1176. doi:10.18429/JACoW-IPAC2016-TUPMB033
[n] B. Goddard, L. Massidda, A. Presland, and W. J. M. Weterings, “Dynamic Stresses in the LHC TCDS Diluter from 7 TeV Beam Loading”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS012, pp. 1511-1513.
[n] R. Schuhmann, W. F. O. Müller, and T. Weiland, “Calculating Trapped Modes in TESLA Cavities with Time and Frequency Domain Methods”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB006, pp. 273-275.
[n] Y. Otake et al., “A Low-Power RF System with Accurate Synchronization for an S-Band RF-Gun Using a Laser-Triggered Photocathode”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-18, pp. 344-346.
[n] H. L. Xu, D. H. He, J.-Y. Liu, N. Sei, K. Yamada, and T. Yamazaki, “Simulation Study of Coherent High Harmonic Generation on NIJI-VI Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH331, pp. 2836-2838.
For LaTeX
Use Complete Form
For BibTeX
References
- R. R. Steerenberg, J.-P. Burnet, M. Giovannozzi, O. Michels, E. M?®tral, and B. Vandorpe, “CERN Proton Synchrotron Working Point Control Using an Improved Version of the Pole-face-windings and Figure-of-eight Loop Powering”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH097, pp. 264-266.
- S. Stuchebrov, A. A. Bulavskaya, Yu. M. Cherepennikov, A. A. Grigorieva, and I. A. Miloichikova, “Concept of Scanning Detector for Measurement of Ejected Medical Hadron Beam Profile”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA35, unpublished.
- R. Brinkmann, “TESLA Linear Collider Design and R&D Status”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MO202, pp. 11-15.
- G. R. Lambertson, K.-J. Kim, and F. V. Voelker, “The Slotted Coax as a Beam Electrode”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2158-2161.
- T. Kamitani et al., “Positron Injector Linac Upgrade for SuperKEKB”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB002, pp. 177-179.
- W. Barry and G. R. Lambertson, “Peturbation Method for the Measurement of Longitudinal and Transverse Beam Impedance”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1602-1605.
- M. Katoh et al., “Microfabrication of Relativistic Electron Beam by Laser and its Application to THz Coherent Synchrotron Radiation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC041, pp. 163-165.
- E. Daly et al., “JLab Cryomodule Assembly Infrastructure Modifications for LCLS-II”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB113, pp. 898-901.
- S. Kanaeda, H. Fukuma, H. Ishii, K. Mori, and M. Tobiyama, “Application of Libera Brilliance+ to Special Purpose BPMs in SuperKEKB”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3544-3546.
- R. M. Bergmann et al., “Verification of the Neutron Mirror Capabilities in MCNPX via Gold Foil Measurements at the EIGER Instrument Beamline at the Swiss Spallation Neutron Source (SINQ)”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3949-3951.
- J. Hammer, M. Magrans de Abril, and C.-E. Wulz, “Interconnection Test Framework for the CMS Level-1 Trigger System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS001, pp. 973-976.
- J. L. Fricke, B. Piosczyk, and J. E. Vetter, “Measurements on the First Section of the Superconducting Proton Linac at Karlsruhe”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper F06, pp. 151-155.
- M. G. Rao, “CEBAF Linac Cryogenic Instrumentation Requirements and a Review of the Available Sensors”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-17, pp. 348-350.
- S. An, Y.-S. Cho, B. H. Choi, and C. Gao, “PEFP HOM Coupler Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN055, pp. 2161-2163.
- M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
- G. Sterbini et al., “Performance of Transverse Beam Splitting and Extraction at the CERN Proton Synchrotron in the Framework of Multi-turn Extraction”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3492-3495.
- G. Ciovati et al., “RF and mechanical design of a 915 MHz SRF cavity for conduction-cooled cryomodules”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 732-735.
- M. Fedurin, B. Craft, and G. Vignola, “CAMD Low Beta Configuration for 7 Tesla Wiggler”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG018, pp. 1053-1055.
- B. E. Fischer and R. Spohr, “Invited Paper: Production of Microstructures by Heavy Ions”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-02, pp. 555-565.
- V. Talanov et al., “Thermal Neutron Beam Characterization at the HRPT Instrument at the Swiss Spallation Neutron Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2134-2136.
- J. E. Theroux et al., “A ÔÇÿShort PortÔÇÖ Beamline For Mounting Custom Targets To A Ge PettraceÔäó Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 361-366.
- M. Yoshida et al., “Generation and Acceleration of Low-Emittance, High-Current Electron Beams for SuperKEKB”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOB03, pp. 21-25.
- N. Ohuchi et al., “Design and Construction of the QC2 Superconducting Magnets in the SuperKEKB IR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1174-1176.
- B. Goddard, L. Massidda, A. Presland, and W. J. M. Weterings, “Dynamic Stresses in the LHC TCDS Diluter from 7 TeV Beam Loading”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS012, pp. 1511-1513.
- R. Schuhmann, W. F. O. Müller, and T. Weiland, “Calculating Trapped Modes in TESLA Cavities with Time and Frequency Domain Methods”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB006, pp. 273-275.
- Y. Otake et al., “A Low-Power RF System with Accurate Synchronization for an S-Band RF-Gun Using a Laser-Triggered Photocathode”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-18, pp. 344-346.
- H. L. Xu, D. H. He, J.-Y. Liu, N. Sei, K. Yamada, and T. Yamazaki, “Simulation Study of Coherent High Harmonic Generation on NIJI-VI Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH331, pp. 2836-2838.
Back to search