Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Kalantari, T. Korhonen, A. L??deke, and C. Quitmann, “Enhancements of Top-up Operation at the Swiss Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF006, pp. 309-311.
[n] T. Kanesue, S. Ikeda, M. Okamura, and Y. Saito, “Design Study of High Repetition Rate Laser Ion Source for High Power Beam Production”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 638-640. doi:10.18429/JACoW-IPAC2017-MOPIK053
[n] W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 217-220. doi:10.18429/JACoW-FEL2015-MOP076
[n] D. H. An et al., “The Stripping Extraction System in the KIRAMS-13 Cyclotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15014, pp. XX-XX.
[n] S. Ogur et al., “Linac and Damping Ring Designs for the FCC-ee”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 420-423. doi:10.18429/JACoW-IPAC2019-MOPMP002
[n] A. Scarfe, D. Angal-Kalinin, R. Appleby, and J. K. Jones, “ATF2 Spot Size Tuning Using the Rotation Matrix Method”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP071, pp. 2662-2664.
[n] M. V. Fazio, B. E. Carlsten, W. B. Haynes, and R. M. Stringfield, “A 500 MW Annular Beam Relativistic Klystron (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-26, pp. 424-426.
[n] G. L. Sabbi, “Nb3Sn Magnets for the LHC Upgrades”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1RAI04, pp. 629-629.
[n] P. N. Ostroumov et al., “R&D Towards CW Ion Linacs at ANL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB08, pp. 461-463.
[n] L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
[n] Y. U. Sohn, J. Choi, M.-H. Chun, J. Y. Huang, I. S. Ko, and I. S. Park, “HOM Analysis and Design of its Removal System for SRF 3rd Harmonic RF Cavity in PLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN062, pp. 2179-2181.
[n] J.-W. Kim, D. G. Kim, and C. K. Hwang, “A Low-Level RF Control System for a Quarter-Wave Resonator”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB084, pp. 1020-1022.
[n] M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2258-2261. doi:10.18429/JACoW-IPAC2016-WEPMR003
[n] S. Seletskiy et al., “Status of the LEReC Machine Protection System”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 487-490. doi:10.18429/JACoW-IBIC2017-TH1AB4
[n] L. P. Sun et al., “Operating Status of Injector II RFQ for C-ADS Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 254-256. doi:10.18429/JACoW-LINAC2016-MOPLR053
[n] B. H. Hong et al., “KIRAMS-13 Target for [18F]Fluoride Production”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99909, pp. XX-XX.
[n] H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 245-248. doi:10.18429/JACoW-SRF2017-MOPB078
[n] J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91.
[n] J. Sage, M. H. Bickley, and K. S. White, “Using a Nameserver to Enhance Control System Efficiency”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP074, pp. XX-XX.
[n] D. Wang et al., “Operating the SDUV-FEL with the EEHG Scheme”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC73, pp. 410-412.
[n] K. Gubin et al., “Test of Materials for the High Temperature Intense Neutron Target Converter”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT117, pp. 1413-1415.
[n] C. Jamet et al., “Injector Diagnostics Overview of SPIRAL2 Accelerator”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB31, pp. 304-306.
[n] Y. Song, G. Liu, and K. Xuan, “The Configurable Software Interlock System for HLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1836-1838. doi:10.18429/JACoW-IPAC2017-TUPIK063
[n] S. Ma et al., “Quadrupole Scan Transverse Emittance Measurements at HZDR ELBE”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1100-1103. doi:10.18429/JACoW-SRF2019-THP083
[n] S. Russenschuck et al., “Electrical Quality Assurance of the Superconducting Circuits during LHC Machine Assembly”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD016, pp. 2440-2442.
[n] Y. Yamaguchi et al., “Evaluation of Expected Performance of Shintake Beam Size Monitor for ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE023, pp. 1014-1016.
[n] J. X. Fang and C. E. Chen, “An Integral Spilt-Ring Resonator Loaded with Drift Tubes and RF Quadrupoles”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2891-2894.
[n] G. O. Bolme, G. P. Boicourt, K. F. Johnson, R. A. Lohsen, O. R. Sander, and L. S. Walling, “Measurement of RF Accelerator Cavity Field Levels at High Power from X-Ray Emissions”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO461, pp. 219-222.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Kalantari, T. Korhonen, A. L??deke, and C. Quitmann, “Enhancements of Top-up Operation at the Swiss Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF006, pp. 309-311.
- T. Kanesue, S. Ikeda, M. Okamura, and Y. Saito, “Design Study of High Repetition Rate Laser Ion Source for High Power Beam Production”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 638-640.
- W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 217-220.
- D. H. An et al., “The Stripping Extraction System in the KIRAMS-13 Cyclotron”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15014, pp. XX-XX.
- S. Ogur et al., “Linac and Damping Ring Designs for the FCC-ee”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 420-423.
- A. Scarfe, D. Angal-Kalinin, R. Appleby, and J. K. Jones, “ATF2 Spot Size Tuning Using the Rotation Matrix Method”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP071, pp. 2662-2664.
- M. V. Fazio, B. E. Carlsten, W. B. Haynes, and R. M. Stringfield, “A 500 MW Annular Beam Relativistic Klystron (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-26, pp. 424-426.
- G. L. Sabbi, “Nb3Sn Magnets for the LHC Upgrades”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU1RAI04, pp. 629-629.
- P. N. Ostroumov et al., “R&D Towards CW Ion Linacs at ANL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB08, pp. 461-463.
- L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
- Y. U. Sohn, J. Choi, M.-H. Chun, J. Y. Huang, I. S. Ko, and I. S. Park, “HOM Analysis and Design of its Removal System for SRF 3rd Harmonic RF Cavity in PLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN062, pp. 2179-2181.
- J.-W. Kim, D. G. Kim, and C. K. Hwang, “A Low-Level RF Control System for a Quarter-Wave Resonator”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB084, pp. 1020-1022.
- M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2258-2261.
- S. Seletskiy et al., “Status of the LEReC Machine Protection System”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 487-490.
- L. P. Sun et al., “Operating Status of Injector II RFQ for C-ADS Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 254-256.
- B. H. Hong et al., “KIRAMS-13 Target for [18F]Fluoride Production”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99909, pp. XX-XX.
- H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 245-248.
- J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91.
- J. Sage, M. H. Bickley, and K. S. White, “Using a Nameserver to Enhance Control System Efficiency”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP074, pp. XX-XX.
- D. Wang et al., “Operating the SDUV-FEL with the EEHG Scheme”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC73, pp. 410-412.
- K. Gubin et al., “Test of Materials for the High Temperature Intense Neutron Target Converter”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT117, pp. 1413-1415.
- C. Jamet et al., “Injector Diagnostics Overview of SPIRAL2 Accelerator”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB31, pp. 304-306.
- Y. Song, G. Liu, and K. Xuan, “The Configurable Software Interlock System for HLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1836-1838.
- S. Ma et al., “Quadrupole Scan Transverse Emittance Measurements at HZDR ELBE”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1100-1103.
- S. Russenschuck et al., “Electrical Quality Assurance of the Superconducting Circuits during LHC Machine Assembly”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD016, pp. 2440-2442.
- Y. Yamaguchi et al., “Evaluation of Expected Performance of Shintake Beam Size Monitor for ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE023, pp. 1014-1016.
- J. X. Fang and C. E. Chen, “An Integral Spilt-Ring Resonator Loaded with Drift Tubes and RF Quadrupoles”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2891-2894.
- G. O. Bolme, G. P. Boicourt, K. F. Johnson, R. A. Lohsen, O. R. Sander, and L. S. Walling, “Measurement of RF Accelerator Cavity Field Levels at High Power from X-Ray Emissions”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO461, pp. 219-222.
Back to search