JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196. 
[n]	I. Reichel and A. Wolski, “Intrabeam Scattering Studies for the ILC Damping Rings Using a New Matlab Code”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH146, pp. 2266-2268. 
[n]	I. Reichel and A. Wolski, “Tracking Studies to Determine the Required Wiggler Aperture for the ILC Damping Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS137, pp. 879-881. 
[n]	S. Kersten et al., “Development of a Detector Control System for the ATLAS Pixel Detector”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT002, pp. XX-XX. 
[n]	A. Dhar et al., “High power RF testing of high temperature superconductors”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEAD2, unpublished. 
[n]	A. A. Vasilyev et al., “A Cyclotron Complex for Accelerating Multicharged Ions up to Relativistic Energies”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-17, pp. 2024-2029. 
[n]	M. Stirbet, J. Popielarski, T. L. Grimm, and M. Johnson, “RF Conditioning and Testing of Fundamental Power Couplers for the RIA Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP26, pp. 682-684. 
[n]	T. Bato, G. Thomas, and F. Varela, “A Model-driven Generator to Automate the Creation of HMIs for the CERN Gas Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1801-1805. doi:10.18429/JACoW-ICALEPCS2017-THPHA163
[n]	C. Matejcek, K. Aulenbacher, S. Friederich, and L. M. Hein, “Low Energy Beam Transport System for MESA”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 20-25. doi:10.18429/JACoW-ERL2017-MOPSPP008
[n]	J. H. Martin, D. Jovanovic, L. G. Lewis, E. G. Pewitt, W. Praeg, and V. J. Sevcik, “Zero Gradient Synchrotron Coil Failures in 1970-71 Analysis and Subsequent Remedial Action”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 729-731. 
[n]	J. de Lamare, A. Donaldson, A. Kulikov, and J. Lipari, “The PEP-II Abort Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P096, pp. 1316-1318. 
[n]	V. L. Granatstein et al., “Prospects for Developing Microwave Amplifiers to Drive Multi-TeV Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ17, pp. 1561-1562. 
[n]	L. M. Hein, K. Aulenbacher, V. Bechthold, M. A. Dehn, S. Friederich, and C. Matejcek, “SPOCK - a Triode DC Electron Gun With Variable Extraction Gradient”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 13-16. doi:10.18429/JACoW-ERL2017-MOPSPP006
[n]	C. S. Narug, M. Parise, and D. Passarelli, “Application of the ASME Boiler and Pressure Vessel Code in the Design of SRF Cavities at Fermilab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 460. doi:10.18429/JACoW-SRF2021-TUPCAV010
[n]	W.-D. M?Âller, P.-D. Gall, A. G?Âssel, V. Gubarev, and M. Pekeler, “The Superconducting Cavity Database for the TESLA Test Facility”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP017, pp. 207-210. 
[n]	A. J. Gonzalez and A. S. Plastun, “RF Chopper for Prebunched Radioactive Ion Beams”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 87-89. doi:10.18429/JACoW-HIAT2022-TUP08
[n]	S. C. Alverson, G. W. Brown, F.-J. Decker, S. Gilevich, and S. Vetter, “Installation of a Hot-Swappable Spare Injector Laser System for the SLAC Linac Coherent Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 163-166. doi:10.18429/JACoW-ICALEPCS2015-MOPGF032
[n]	R. Yoder and J. B. Rosenzweig, “A Slab-Symmetric Dielectric-Loaded Structure for High-Gradient Acceleration at THz”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG045, pp. 1533-1535. 
[n]	A. Dhar et al., “REBCO sample testing at high power X-band”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2772-2774. doi:10.18429/JACoW-IPAC2024-WEPS37
[n]	I. Reichel, “Injection and Extraction Lines for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN115, pp. 2984-2986. 
[n]	M. Awschalom, M. V. Isaila, and F. C. Shoemaker, “A Synchronization Pulse for the Princeton-Pennsylvania Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 74-76. 
[n]	N. L. Leicester et al., “Development and Testing of Split 6 GHz Cavities With Niobium Coatings”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 51-55. doi:10.18429/JACoW-SRF2023-MOPMB001
[n]	Y. Verma, M. Aggarwal, V. J. Joshi, and A. Sharma, “Characterization Study of a Button BPM with an Approach to Automated Measurements”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 233-236. doi:10.18429/JACoW-IBIC2020-THPP12
[n]	G. D'Alessandro et al., “Implementation of CERN Secondary Beam Lines T9 and T10 in BDSIM”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3746-3748. doi:10.18429/JACoW-IPAC2019-THPGW069
[n]	J. Karmakar et al., “Latest dark current studies of rf photocathode gun of Delhi Light Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM045, unpublished. 
[n]	A. Bishop, “Why Cybersecurity Should Not Be Left to the Experts”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEKPP01, pp. XX-XX. 
[n]	T. S. Mattison, R. L. Cassel, A. R. Donaldson, and G. Gross, “Fast and Reliable Kicker Magnets for the SLC Damping Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR06, pp. 1915-1917. 
[n]	R. D. Kohaupt, “Multi-Bunch Systems at DESY”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ32, pp. 2741-2741. 
[n]	K. Hwang and J. Qiang, “Numerical Shot Noise Modeling and Particle Migration Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4274-4276. doi:10.18429/JACoW-IPAC2018-THPMF084
[n]	S. A. Kahn, G. Flanagan, F. Hunte, R. P. Johnson, J. Schwartz, and M. Turenne, “YBCO Conductor Technology for High Field Muon Cooling Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB055, pp. 394-396. 
[n]	W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 9-19. 
[n]	R. K. Jobe et al., “Position, Angle and Energy Stabilization for the SLC Positron Target and Arcs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 713-716. 
[n]	M. A. Hevinga, S. Brandenburg, T. W. Nijboer, and J. Vorenholt, “Beamloss Monitoring and Control for High Intensity Beams at the AGOR-Facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP087, pp. 227-229. 
[n]	M. B?Âge et al., “Correction of Insertion Device Induced Orbit Distortions at the SLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP018, pp. 1584-1585. 
[n]	E. Behtenev, V. Bocharov, V. Bubley, M. Vedenev, R. Voskoboinikov, and A. Goncharov, “COMMISSION OF ELECTRON COOLER EC-300 FOR HIRFL-CSR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUAI02, pp. XX-XX. 
[n]	R. Dusad and G. Travish, “Use of Re-Acceleration and Tapering in High Gain Free Electron Lasers to Enhance Power and Energy Extraction”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC09, pp. 115-117. 
[n]	C. S. Hopper and J. R. Delayen, “Multipacting Analysis of High-velocity Superconducting Spoke Resonators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB026, pp. 68-70. 
[n]	D. J. Ciardullo and J. M. Brennan, “The Average Orbit System Upgrade for the Brookhaven AGS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ30, pp. 2518-2520. 
[n]	P. Gras, W. Funk, L. Gross, D. Vintache, and F. Drouhin, “Front-End Electronics Configuration System for CMS”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEDT005, pp. XX-XX. 
[n]	N. Kuklev, M. Borland, G. Fystro, H. Shang, and Y. Sun, “Robust adaptive bayesian optimization”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4428-4431. doi:10.18429/JACoW-IPAC2023-THPL007
[n]	V. G. Khachatryan, T. Garvey, S. Reiche, V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “PSI-XFEL Sensitivity to Beam Main Parameters and Undulator Focusing”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP054, pp. 1208-1210. 
[n]	R. W. Klaffky, R. M. Lindstrom, B. Maranville, B. J. Micklich, R. Shull, and J. H. Vacca, “Thermal Neutron Demagnetization of NdFeB Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS130, pp. 3589-3591. 
[n]	J. You et al., “Multi-physics analysis of a 280 MHz superconducting radio-frequency quadrupole test cavity”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS155, unpublished. 
[n]	N. Yu. Kazarinov, I. A. Ivanenko, and F. R. Osswald, “Axial Injection Channel of IPHC Cyclotron TR24 and Possibility of Ion Beam Bunching”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 224-226. doi:10.18429/JACoW-Cyclotrons2016-TUP26
[n]	R. G. Schonberg et al., “Portable X-Band Linear Accelerator Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3234-3237. 
[n]	R. Andersson, E. Bargall??, A. Monera Martinez, and A. Nordt, “A Modified Functional Safety Method for Predicting False Beam Trips and Blind Failures in the Design Phase of the ESS Beam Interlock System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 378-381. doi:10.18429/JACoW-ICALEPCS2015-MOPGF126
[n]	J. Klavins et al., “Breakdown Localization Studies on the SwissFEL C-band Test Structures”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI058, pp. 2824-2826. 
[n]	D. J. Ning, “Digital Transformation of Urban Economy and Case Study”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper WEKL01, unpublished. 
[n]	P. Kuznetsov, V. Parkhomchuk, and G. Silvestrov, “Multi-Channel Water Steam H Source for Internal Injection to a Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-19, pp. 429-431. 
[n]	N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Source Size and Emittance Measurements for Low-Emittance Light Sources”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THAO03, unpublished. 
[n]	J. S. Lee and C.-Y. Lee, “The Design and Manufacture of a 300 keV Heavy Ion Implanter for Surface Modification of Materials”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH191, pp. 2382-2384. 
[n]	S. H. Ananian, R. H. Manukian, A. R. Matevosian, V. T. Nikogossian, and A. R. Tumanian, “The Estimation and Control of Closed Orbit in Fast Cycling Sychrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1446-1448. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search