Favourites
For Word
[n] J. A. Einstein-Curtis et al., “Classification and Prediction of Superconducting Magnet Quenches”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 856-859. doi:10.18429/JACoW-ICALEPCS2023-TUPDP117
[n] T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Radio Frequency Quadrupole Surrogate Field Models Based on 3D Electromagnetic Field Simulation Results”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 379-381. doi:10.18429/JACoW-IPAC2014-MOPME003
[n] M. E. Conde et al., “Research Program and Recent Results at the Argonne Wakefield Accelerator Facility (AWA)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2885-2887. doi:10.18429/JACoW-IPAC2017-WEPAB132
[n] S. Ogur et al., “Towards a Preliminary FCC-ee Injector Design”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 90-93. doi:10.18429/JACoW-eeFACT2016-TUT2H5
[n] C. S. Liu, Q. Luo, B. G. Sun, and Z. R. Zhou, “Development of FPGA-based Bunch-by-Bunch Beam Current Monitor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 193-195. doi:10.18429/JACoW-IPAC2016-MOPMB045
[n] N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596.
[n] J. S. MacKay, “Electron Beam Profile, Positron Systems and Measurements on the Daresbury SRS”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 43-46.
[n] D. Kraemer, B. Holzer, E. Jaeschke, W. Ott, and R. Repnow, “The Magnetsystem of the TSR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1175-1178.
[n] S. M. Lewis, A. A. Haase, J. W. Merrick, E. A. Nanni, M. A. K. Othman, and S. G. Tantawi, “Fabrication and Tuning of a THz-Driven Electron Gun”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1297-1300. doi:10.18429/JACoW-IPAC2021-TUXB04
[n] G. Turemen et al., “Current Status of the SANAEM RFQ Accelerator Beamline”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3952-3955. doi:10.18429/JACoW-IPAC2015-THPF103
[n] C. Limborg, A. Ringwall, M. Rowen, and J. Stieber, “An Ultra-Violet Light Monitor for SPEAR3”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI096, pp. 1924-1926.
[n] C. E. Taylor et al., “Model Driven Reconfiguration of LANSCE Tuning Methods”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 267-272. doi:10.18429/JACoW-ICALEPCS2023-TU1BCO05
[n] T. Ieiri et al., “Beam Monitors and Transverse Feedback Systems of TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 729-732.
[n] S. M. Pruss et al., “Hybrid Permanent Quadrupoles for the 8 GeV Transfer Line at Fermilab”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P032, pp. 3286-3287.
[n] A. E. Levichev, Y. D. Chernousov, V. Ivannikov, V. M. Pavlov, and I. V. Shebolaev, “Characteristics of the Parallel Coupled Accelerating Structure”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA040, pp. 3765-3767.
[n] U. Pudasaini et al., “Recent Results From Nb?Sn Single Cell Cavities Coated at Jefferson Lab”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 65-70. doi:10.18429/JACoW-SRF2019-MOP018
[n] S. V. Kutsaev et al., “Industrial SRF Activities at RadiaBeam Technologies”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper FRIYA03, unpublished.
[n] R. Hajima, H. Iijima, R. Nagai, N. Nishimori, and T. Nishitani, “Development of a Photocathode DC Gun at JAEA-ERL”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA047, pp. 175-177.
[n] P. V. Avrakhov, A. Kanareykin, S. Kazakov, N. Solyak, G. Wu, and V. P. Yakovlev, “Three-cell Traveling-wave Superconducting Test Structure”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP066, pp. 940-942.
[n] T. A. Miller et al., “LEReC Instrumentation Design & Construction”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 417-421. doi:10.18429/JACoW-IBIC2016-TUPG35
[n] M. S. Chun et al., “Development of High Power Electron Accelerator for Industrial Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A09, pp. 2612-2614.
[n] C. Liu et al., “Reducing Spin Tune Spread by Matching DX Prime at Snakes in RHIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO074, pp. 2030-2032.
[n] F. Marteau et al., “Development and Installation of Insertion Devices at SOLEIL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP080, pp. 2453-2455.
[n] N. Agapov et al., “How a 100 TeV Synchrotron/Collider Based on the Nuclotron-type Cryomagnetic System Would Look”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP083G, pp. 410-414.
[n] M. García et al., “IFMIF/EVEDA Beam Dump Shielding: Optimized Design of the Front Part”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS045, pp. 1635-1637.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Einstein-Curtis et al., “Classification and Prediction of Superconducting Magnet Quenches”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP117, pp. 856-859.
- T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Radio Frequency Quadrupole Surrogate Field Models Based on 3D Electromagnetic Field Simulation Results”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 379-381.
- M. E. Conde et al., “Research Program and Recent Results at the Argonne Wakefield Accelerator Facility (AWA)”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2885-2887.
- S. Ogur et al., “Towards a Preliminary FCC-ee Injector Design”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 90-93.
- C. S. Liu, Q. Luo, B. G. Sun, and Z. R. Zhou, “Development of FPGA-based Bunch-by-Bunch Beam Current Monitor”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 193-195.
- N. K. Bultman et al., “Mechanical Engineering of a Linac for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA86, pp. 3594-3596.
- J. S. MacKay, “Electron Beam Profile, Positron Systems and Measurements on the Daresbury SRS”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 43-46.
- D. Kraemer, B. Holzer, E. Jaeschke, W. Ott, and R. Repnow, “The Magnetsystem of the TSR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1175-1178.
- S. M. Lewis, A. A. Haase, J. W. Merrick, E. A. Nanni, M. A. K. Othman, and S. G. Tantawi, “Fabrication and Tuning of a THz-Driven Electron Gun”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1297-1300.
- G. Turemen et al., “Current Status of the SANAEM RFQ Accelerator Beamline”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3952-3955.
- C. Limborg, A. Ringwall, M. Rowen, and J. Stieber, “An Ultra-Violet Light Monitor for SPEAR3”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI096, pp. 1924-1926.
- C. E. Taylor et al., “Model Driven Reconfiguration of LANSCE Tuning Methods”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TU1BCO05, pp. 267-272.
- T. Ieiri et al., “Beam Monitors and Transverse Feedback Systems of TRISTAN Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 729-732.
- S. M. Pruss et al., “Hybrid Permanent Quadrupoles for the 8 GeV Transfer Line at Fermilab”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P032, pp. 3286-3287.
- A. E. Levichev, Y. D. Chernousov, V. Ivannikov, V. M. Pavlov, and I. V. Shebolaev, “Characteristics of the Parallel Coupled Accelerating Structure”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA040, pp. 3765-3767.
- U. Pudasaini et al., “Recent Results From Nb?Sn Single Cell Cavities Coated at Jefferson Lab”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 65-70.
- S. V. Kutsaev et al., “Industrial SRF Activities at RadiaBeam Technologies”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIYA03, unpublished.
- R. Hajima, H. Iijima, R. Nagai, N. Nishimori, and T. Nishitani, “Development of a Photocathode DC Gun at JAEA-ERL”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA047, pp. 175-177.
- P. V. Avrakhov, A. Kanareykin, S. Kazakov, N. Solyak, G. Wu, and V. P. Yakovlev, “Three-cell Traveling-wave Superconducting Test Structure”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP066, pp. 940-942.
- T. A. Miller et al., “LEReC Instrumentation Design & Construction”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 417-421.
- M. S. Chun et al., “Development of High Power Electron Accelerator for Industrial Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A09, pp. 2612-2614.
- C. Liu et al., “Reducing Spin Tune Spread by Matching DX Prime at Snakes in RHIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO074, pp. 2030-2032.
- F. Marteau et al., “Development and Installation of Insertion Devices at SOLEIL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP080, pp. 2453-2455.
- N. Agapov et al., “How a 100 TeV Synchrotron/Collider Based on the Nuclotron-type Cryomagnetic System Would Look”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP083G, pp. 410-414.
- M. García et al., “IFMIF/EVEDA Beam Dump Shielding: Optimized Design of the Front Part”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS045, pp. 1635-1637.
Back to search