Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. I. Gadjev, G. Andonian, T. J. Campese, C. C. Hall, and M. Ruelas, “Design of Split Permanent Magnet Quadrupoles for Small Aperture Implementation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4247-4249. doi:10.18429/JACoW-IPAC2021-THPAB230
[n] J. Kirchgessner et al., “Superconducting Cavities for Synchrotron Use”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1141-1144.
[n] M. Sawamura, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and N. Nishimori, “Performance and Upgrade of the JAERI ERL-FEL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB079, pp. 3446-3448.
[n] C. Sun, G. J. Portmann, D. Robin, and C. Steier, “Realization of Pseudo Single Bunch Operation with Adjustable Frequency”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2396-2401. doi:10.18429/JACoW-IPAC2015-WEXB3
[n] Z. Parsa and V. Zadorozhny, “ACCELERATION AND FOCUSING AS OPTIMAL CONTROL FOR DYNAMIC SYSTEMS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP27, pp. XX-XX.
[n] S. Onuma et al., “The Spill Feedback Control Unit for J-PARC Slow Extraction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB038, pp. 2770-2772.
[n] C. Steier et al., “Status of the ALS Brightness Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP037, pp. 1692-1694.
[n] B. McDaniel, “The Commissioning and Performance Characteristics of CESR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 1984-1989.
[n] J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70.
[n] A. V. Smirnov et al., “Characterization of a Sub-THz Radiation Source Based on a 3 MeV Electron Beam and Future Plans”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1892-1894. doi:10.18429/JACoW-IPAC2016-TUPOW054
[n] D. Rice, “High Luminosity Operation of the Cornell Electron Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 444-447.
[n] C. M. Warsop et al., “Simulation and Measurement of Half Integer Resonance in Coasting Beams in the ISIS Ring”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1C02, pp. 434-438.
[n] R. Sundelin, “Superconducting RF for Direct Acceleration in TeV Colliders”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU1-04, pp. 221-223.
[n] R. Hajima and E. J. Minehara, “Energy-Recovery Option for a Future X-ray Free-Electron Laser”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH114, pp. 2736-2738.
[n] Y. I. Levinsen, G. Giambelli, A. Latina, R. Tomas, H. Garcia, and J. Snuverink, “Tuning of the Compact Linear Collider Beam Delivery System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3788-3790. doi:10.18429/JACoW-IPAC2014-THPRI012
[n] V. Zadorozhny and Z. Parsa, “Acceleration and Self-Focused Particle Beam Drivers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG059, pp. 3005-3007.
[n] M. Shirakata, H. Fujimori, and Y. Irie, “Beam Tracking Study for the Large Aperture Bump System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI039, pp. 1670-1672.
[n] C. M. Celata, F. M. Bieniosek, A. Friedman, D. P. Grote, L. R. Prost, and P. A. Seidl, “The Dynamic Aperture of an Electrostatic Quadrupole Lattice”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT026, pp. 1946-1948.
[n] J. B. Fitzgerald, B. G. Martlew, P. D. Quinn, and S. L. Smith, “An Analysis of the Operational Performance of the Automatic Global Horizontal Beam Position Control System on the SRS at Daresbury”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE10, pp. 2414-2416.
[n] Y. Han, M.-Y. Huang, Z. Li, A. Li, and J. Peng, “Study of energy jitter and energy spread compression for the CSNS-II linac”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4611, unpublished.
[n] Z. Parsa and V. Zadorozhny, “On Landau Scenario of Chaotization for Beam Distribution”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA99, pp. 2820-2821.
[n] J. B. Fitzgerald, B. G. Martlew, C. Morrell, and S. L. Smith, “The Daresbury Global Horizontal Servo Feedback System: Status and Outlook”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP019L, pp. 1848-1850.
[n] P. Frigola et al., “Advance Additive Manufacturing Method for SRF Cavities of Various Geometries”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB042, pp. 1181-1184.
[n] P. Dickenson, S. A. Griffiths, S. J. Hands, and R. J. Smith, “Upgrade to the SRS 10Hz Booster Power Supply”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A02, pp. 2205-2207.
[n] A. V. Demyanov, “Application of 235U+ Ion Beams for Increasing the Safety of Operation in Nuclear Reactors for Atomic Power Station (APS)”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper D-03, pp. 148-149.
[n] M. Ikegami, T. Morishita, T. Ohkawa, and H. Sako, “Beam Dynamics Design of Debuncher System for J-PARC Linac Energy Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP054, pp. 3829-3831.
[n] D. J. Adams et al., “Ring Simulation and Beam Dynamics Studies for ISIS Upgrades 0.5 to 10 MW”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO3LR02, pp. 374-378.
[n] S. Kwiatkowski, K. M. Baptiste, J. Julian, M. E. Kennedy, and J. Miszczak, “Final Layout and Test Results of the Disconnect Switch for ALS Storage Ring RF System Power Supply”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO036, pp. 3421-3423.
[n] S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4383-4385. doi:10.18429/JACoW-IPAC2017-THPIK121
[n] B. Keil and K. Wille, “Control of a Ramped 1.5 GeV Electron Storage Ring by a Multiprocessor DSP Network”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI087, pp. 2079-2081.
[n] M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4389-4391. doi:10.18429/JACoW-IPAC2017-THPIK123
[n] C. M. Warsop et al., “High Intensity Loss Mechanisms on the ISIS Rapid Cycling Synchrotron”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3LR03, pp. 203-207.
[n] A. Kalinin, “Beam-Based Methods of BPM Center Offset and Resolution Measurements”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI091, pp. 1909-1911.
[n] R. Sundelin et al., “CESR RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2844-2847.
[n] M. Sawamura, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and N. Nishimori, “Cost Estimation of an Energy Recovery Linac Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB080, pp. 3449-3451.
[n] S. Henderson et al., “Investigation of the Mobius Accelerator at CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDR8, pp. 410-412.
[n] A. Styervoyedov and Y. Shashel, “Microprocessor Based Pulse Synchronization System for Linear Electron Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI105, pp. 1978-1979.
[n] M. L. Neubauer et al., “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC060, pp. 3028-3030.
[n] A. Styervoyedov, M. Silkin, A. Yatskov, and V. Farenik, “Accelerator Control System Based on Radiation-Acoustic Effects”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI104, pp. 1975-1977.
[n] K. Furuya et al., “Positive-ion Multi-turn Injection with Bi-Waveform Fast Orbit-Bump Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP083G, pp. 2444-2446.
[n] R. Soliday, “Proliferation of SDDS Support for Various Platforms and Languages”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP031, pp. XX-XX.
[n] T. Adachi et al., “Development of a Signal Processing Board for Spill Digital Servo System for Proton Synchrotron”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB14, pp. 430-432.
[n] W. J. DeHope, K. L. Griffin, R. Kihara, M. M. Ong, and O. Ross, “An Improved SF6 System for the FXR Induction Linac Blumlein Switches”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS015, pp. 2361-2363.
[n] T. Ohkawa, H. Ao, K. Hasegawa, M. Ikegami, H. Sako, and A. Ueno, “Comparison of Trajectory Between Modeling and Experiment for J-PARC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN043, pp. 3324-3326.
[n] A. V. Demyanov, S. L. Bogomolov, and V. B. Kutner, “Injector of Multiply Charged Ions for Acclerators and Implanters”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-11, pp. 433-434.
[n] J. B. Fitzgerald and G. Mrotzek, “Performance and Progress of the Daresbury Photon Beam Tungsten Vane Monitor System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP020L, pp. 1851-1853.
[n] C. Montag, L. Ahrens, and P. Thieberger, “Tomographic Measurement of Longitudinal Emittance Growth Due to Stripping Foils”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT027, pp. 2000-2002.
[n] J. B. Fitzgerald, B. G. Martlew, and P. D. Quinn, “Operational Performance of the Local Vertical Servo System on the Daresbury SRS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP021L, pp. 1854-1856.
[n] J. R. Roensch et al., “Longitudinal Phase Space Studies at PITZ”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP040, pp. XX-XX.
[n] M. Billing, “Controls in Use at CESR for Adjusting Horizontal to Vertical Coupling”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2246-2249.
[n] E. Young, S. Henderson, R. Littauer, B. McDaniel, T. Pelaia, and R. Talman, “Collisions of Resonantly Coupled Round Beams at the Cornell Electron-Positron Storage Ring (CESR)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B003, pp. 1542-1544.
[n] S. Igarashi, E. Nakamura, Y. Shimosaki, M. Shirakata, K. Takayama, and T. Toyama, “An Experimental Study of the Intensity Dependent Beam Loss Mechanisms during the Injection Period of the KEK PS 12 GeV Main Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A08, pp. 1300-1302.
[n] S. Nikiforov, D. V. Efremov, A. Solnyshkov, D. Solnyshkov, and G. Voronin, “Development of an ECR Ion Source for Accelerators and Plasma Processing Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1427-1430.
[n] S. Greenwald, Z. Greenwald, D. Hartill, J. Kirchgessner, D. Morse, and D. Rice, “RF Cavity Design for High Current Operation of the Cornell Electron Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 226-229.
[n] F. M. Bieniosek, E. Henestroza, J. W. Kwan, L. R. Prost, and P. A. Seidl, “2-MV Injector for HCX”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH011, pp. 2099-2101.
[n] K. Yonehara, Y. S. Derbenev, R. P. Johnson, and M. L. Neubauer, “A Helical Cooling Channel System for Muon Colliders”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD076, pp. 870-872.
[n] A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893.
[n] G. Voronin, V. Kovalchuk, A. Solnyshkov, and M. Svinin, “Development of the Intense Neutron Generator SNEG-13”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2678-2681.
[n] F. Asvesta, H. Bartosik, A. Huschauer, Y. Papaphilippou, and G. Sterbini, “Resonance Identification Studies at the CERN PS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3350-3353. doi:10.18429/JACoW-IPAC2018-THPAK056
[n] M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4392-4394. doi:10.18429/JACoW-IPAC2017-THPIK124
[n] Y. Li et al., “Design and Implementation of CESRTA Superconducting Wiggler Beampipes with Thin Retarding Field Analyzers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP029, pp. 3507-3509.
[n] T. J. Campese et al., “Multi-Diagnostic Transverse Profile Monitor Chamber for Extreme Ultraviolet Lithography”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 554-556. doi:10.18429/JACoW-IBIC2015-TUPB085
[n] R. Losito and E. Métral, “CERN accelerates sustainability”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2906-2908. doi:10.18429/JACoW-IPAC2024-WEPS84
[n] N. Rider et al., “Bunch-By-Bunch Instrumentation Upgrades For CESR, Based On Requirements For The CESR Test Accelerator Research Program”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST02, pp. 88-90.
[n] P. R. Carriere, P. Frigola, D. Gamzina, T. Horn, and A. Y. Murokh, “Additive Manufacturing of Electrical and Thermal Devices: Challenges and Opportunities”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THYBB2, unpublished.
[n] S. M. Lynam, R. B. Agustsson, I. I. Gadjev, F. H. O, and A. Yu. Smirnov, “Fabrication Progress of a Superconducting Helical Undulator with Superimposed Focusing Gradient for High Efficiency Tapered X-Ray FELs”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 509-511. doi:10.18429/JACoW-NAPAC2019-TUPLH10
[n] A. Tikhomirov, M. El-Shazly, G. Gulbekian, and R. Oganessian, “Modeling of the Beam Transmission Efficiency Dependent on the Charge Exchange with the Residual Gas for the CI-100 Cyclotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH086, pp. 3042-3044.
[n] E. J. Minehara, “The JAERI Superconducting RF Linac-based FELs and their Cryogenics”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ008, pp. XX-XX.
[n] K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. P. Kelly, A. M. Porcellato, and G. J. Waldschmidt, “Variable CW RF Power Coupler for 345 MHz Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN087, pp. 2230-2232.
[n] J. B. Fitzgerald and M. W. Poole, “A Full-Energy Booster for DIAMOND”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP024G, pp. 539-541.
[n] K. Takayama et al., “KEK Digital Accelerator for Material and Biological Sciences”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC052, pp. 576-578.
[n] D. C. Kiselev, D. Schumann, S. Teichmann, and M. Wohlmuther, “Activation of Targets and Accelerator Components at PSI -- A Comparison of Simulation and Measurement”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD09, pp. 363-370.
For LaTeX
Use Complete Form
For BibTeX
References
- I. I. Gadjev, G. Andonian, T. J. Campese, C. C. Hall, and M. Ruelas, “Design of Split Permanent Magnet Quadrupoles for Small Aperture Implementation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4247-4249.
- J. Kirchgessner et al., “Superconducting Cavities for Synchrotron Use”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1141-1144.
- M. Sawamura, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and N. Nishimori, “Performance and Upgrade of the JAERI ERL-FEL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB079, pp. 3446-3448.
- C. Sun, G. J. Portmann, D. Robin, and C. Steier, “Realization of Pseudo Single Bunch Operation with Adjustable Frequency”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2396-2401.
- Z. Parsa and V. Zadorozhny, “ACCELERATION AND FOCUSING AS OPTIMAL CONTROL FOR DYNAMIC SYSTEMS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP27, pp. XX-XX.
- S. Onuma et al., “The Spill Feedback Control Unit for J-PARC Slow Extraction”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB038, pp. 2770-2772.
- C. Steier et al., “Status of the ALS Brightness Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP037, pp. 1692-1694.
- B. McDaniel, “The Commissioning and Performance Characteristics of CESR”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 1984-1989.
- J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70.
- A. V. Smirnov et al., “Characterization of a Sub-THz Radiation Source Based on a 3 MeV Electron Beam and Future Plans”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1892-1894.
- D. Rice, “High Luminosity Operation of the Cornell Electron Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 444-447.
- C. M. Warsop et al., “Simulation and Measurement of Half Integer Resonance in Coasting Beams in the ISIS Ring”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO1C02, pp. 434-438.
- R. Sundelin, “Superconducting RF for Direct Acceleration in TeV Colliders”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TU1-04, pp. 221-223.
- R. Hajima and E. J. Minehara, “Energy-Recovery Option for a Future X-ray Free-Electron Laser”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH114, pp. 2736-2738.
- Y. I. Levinsen, G. Giambelli, A. Latina, R. Tomas, H. Garcia, and J. Snuverink, “Tuning of the Compact Linear Collider Beam Delivery System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3788-3790.
- V. Zadorozhny and Z. Parsa, “Acceleration and Self-Focused Particle Beam Drivers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG059, pp. 3005-3007.
- M. Shirakata, H. Fujimori, and Y. Irie, “Beam Tracking Study for the Large Aperture Bump System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI039, pp. 1670-1672.
- C. M. Celata, F. M. Bieniosek, A. Friedman, D. P. Grote, L. R. Prost, and P. A. Seidl, “The Dynamic Aperture of an Electrostatic Quadrupole Lattice”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT026, pp. 1946-1948.
- J. B. Fitzgerald, B. G. Martlew, P. D. Quinn, and S. L. Smith, “An Analysis of the Operational Performance of the Automatic Global Horizontal Beam Position Control System on the SRS at Daresbury”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE10, pp. 2414-2416.
- Y. Han, M.-Y. Huang, Z. Li, A. Li, and J. Peng, “Study of energy jitter and energy spread compression for the CSNS-II linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4611, this conference.
- Z. Parsa and V. Zadorozhny, “On Landau Scenario of Chaotization for Beam Distribution”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA99, pp. 2820-2821.
- J. B. Fitzgerald, B. G. Martlew, C. Morrell, and S. L. Smith, “The Daresbury Global Horizontal Servo Feedback System: Status and Outlook”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP019L, pp. 1848-1850.
- P. Frigola et al., “Advance Additive Manufacturing Method for SRF Cavities of Various Geometries”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB042, pp. 1181-1184.
- P. Dickenson, S. A. Griffiths, S. J. Hands, and R. J. Smith, “Upgrade to the SRS 10Hz Booster Power Supply”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A02, pp. 2205-2207.
- A. V. Demyanov, “Application of 235U+ Ion Beams for Increasing the Safety of Operation in Nuclear Reactors for Atomic Power Station (APS)”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper D-03, pp. 148-149.
- M. Ikegami, T. Morishita, T. Ohkawa, and H. Sako, “Beam Dynamics Design of Debuncher System for J-PARC Linac Energy Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP054, pp. 3829-3831.
- D. J. Adams et al., “Ring Simulation and Beam Dynamics Studies for ISIS Upgrades 0.5 to 10 MW”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO3LR02, pp. 374-378.
- S. Kwiatkowski, K. M. Baptiste, J. Julian, M. E. Kennedy, and J. Miszczak, “Final Layout and Test Results of the Disconnect Switch for ALS Storage Ring RF System Power Supply”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO036, pp. 3421-3423.
- S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4383-4385.
- B. Keil and K. Wille, “Control of a Ramped 1.5 GeV Electron Storage Ring by a Multiprocessor DSP Network”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI087, pp. 2079-2081.
- M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4389-4391.
- C. M. Warsop et al., “High Intensity Loss Mechanisms on the ISIS Rapid Cycling Synchrotron”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO3LR03, pp. 203-207.
- A. Kalinin, “Beam-Based Methods of BPM Center Offset and Resolution Measurements”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI091, pp. 1909-1911.
- R. Sundelin et al., “CESR RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2844-2847.
- M. Sawamura, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and N. Nishimori, “Cost Estimation of an Energy Recovery Linac Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB080, pp. 3449-3451.
- S. Henderson et al., “Investigation of the Mobius Accelerator at CESR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDR8, pp. 410-412.
- A. Styervoyedov and Y. Shashel, “Microprocessor Based Pulse Synchronization System for Linear Electron Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI105, pp. 1978-1979.
- M. L. Neubauer et al., “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC060, pp. 3028-3030.
- A. Styervoyedov, M. Silkin, A. Yatskov, and V. Farenik, “Accelerator Control System Based on Radiation-Acoustic Effects”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI104, pp. 1975-1977.
- K. Furuya et al., “Positive-ion Multi-turn Injection with Bi-Waveform Fast Orbit-Bump Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP083G, pp. 2444-2446.
- R. Soliday, “Proliferation of SDDS Support for Various Platforms and Languages”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP031, pp. XX-XX.
- T. Adachi et al., “Development of a Signal Processing Board for Spill Digital Servo System for Proton Synchrotron”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB14, pp. 430-432.
- W. J. DeHope, K. L. Griffin, R. Kihara, M. M. Ong, and O. Ross, “An Improved SF6 System for the FXR Induction Linac Blumlein Switches”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS015, pp. 2361-2363.
- T. Ohkawa, H. Ao, K. Hasegawa, M. Ikegami, H. Sako, and A. Ueno, “Comparison of Trajectory Between Modeling and Experiment for J-PARC Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN043, pp. 3324-3326.
- A. V. Demyanov, S. L. Bogomolov, and V. B. Kutner, “Injector of Multiply Charged Ions for Acclerators and Implanters”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-11, pp. 433-434.
- J. B. Fitzgerald and G. Mrotzek, “Performance and Progress of the Daresbury Photon Beam Tungsten Vane Monitor System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP020L, pp. 1851-1853.
- C. Montag, L. Ahrens, and P. Thieberger, “Tomographic Measurement of Longitudinal Emittance Growth Due to Stripping Foils”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT027, pp. 2000-2002.
- J. B. Fitzgerald, B. G. Martlew, and P. D. Quinn, “Operational Performance of the Local Vertical Servo System on the Daresbury SRS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP021L, pp. 1854-1856.
- J. R. Roensch et al., “Longitudinal Phase Space Studies at PITZ”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP040, pp. XX-XX.
- M. Billing, “Controls in Use at CESR for Adjusting Horizontal to Vertical Coupling”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2246-2249.
- E. Young, S. Henderson, R. Littauer, B. McDaniel, T. Pelaia, and R. Talman, “Collisions of Resonantly Coupled Round Beams at the Cornell Electron-Positron Storage Ring (CESR)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B003, pp. 1542-1544.
- S. Igarashi, E. Nakamura, Y. Shimosaki, M. Shirakata, K. Takayama, and T. Toyama, “An Experimental Study of the Intensity Dependent Beam Loss Mechanisms during the Injection Period of the KEK PS 12 GeV Main Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A08, pp. 1300-1302.
- S. Nikiforov, D. V. Efremov, A. Solnyshkov, D. Solnyshkov, and G. Voronin, “Development of an ECR Ion Source for Accelerators and Plasma Processing Applications”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1427-1430.
- S. Greenwald, Z. Greenwald, D. Hartill, J. Kirchgessner, D. Morse, and D. Rice, “RF Cavity Design for High Current Operation of the Cornell Electron Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 226-229.
- F. M. Bieniosek, E. Henestroza, J. W. Kwan, L. R. Prost, and P. A. Seidl, “2-MV Injector for HCX”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH011, pp. 2099-2101.
- K. Yonehara, Y. S. Derbenev, R. P. Johnson, and M. L. Neubauer, “A Helical Cooling Channel System for Muon Colliders”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD076, pp. 870-872.
- A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893.
- G. Voronin, V. Kovalchuk, A. Solnyshkov, and M. Svinin, “Development of the Intense Neutron Generator SNEG-13”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2678-2681.
- F. Asvesta, H. Bartosik, A. Huschauer, Y. Papaphilippou, and G. Sterbini, “Resonance Identification Studies at the CERN PS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3350-3353.
- M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4392-4394.
- Y. Li et al., “Design and Implementation of CESRTA Superconducting Wiggler Beampipes with Thin Retarding Field Analyzers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP029, pp. 3507-3509.
- T. J. Campese et al., “Multi-Diagnostic Transverse Profile Monitor Chamber for Extreme Ultraviolet Lithography”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 554-556.
- R. Losito and E. Métral, “CERN accelerates sustainability”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS84, pp. 2906-2908.
- N. Rider et al., “Bunch-By-Bunch Instrumentation Upgrades For CESR, Based On Requirements For The CESR Test Accelerator Research Program”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST02, pp. 88-90.
- P. R. Carriere, P. Frigola, D. Gamzina, T. Horn, and A. Y. Murokh, “Additive Manufacturing of Electrical and Thermal Devices: Challenges and Opportunities”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper THYBB2, unpublished.
- S. M. Lynam, R. B. Agustsson, I. I. Gadjev, F. H. O, and A. Yu. Smirnov, “Fabrication Progress of a Superconducting Helical Undulator with Superimposed Focusing Gradient for High Efficiency Tapered X-Ray FELs”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 509-511.
- A. Tikhomirov, M. El-Shazly, G. Gulbekian, and R. Oganessian, “Modeling of the Beam Transmission Efficiency Dependent on the Charge Exchange with the Residual Gas for the CI-100 Cyclotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH086, pp. 3042-3044.
- E. J. Minehara, “The JAERI Superconducting RF Linac-based FELs and their Cryogenics”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ008, pp. XX-XX.
- K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. P. Kelly, A. M. Porcellato, and G. J. Waldschmidt, “Variable CW RF Power Coupler for 345 MHz Superconducting Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN087, pp. 2230-2232.
- J. B. Fitzgerald and M. W. Poole, “A Full-Energy Booster for DIAMOND”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP024G, pp. 539-541.
- K. Takayama et al., “KEK Digital Accelerator for Material and Biological Sciences”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC052, pp. 576-578.
- D. C. Kiselev, D. Schumann, S. Teichmann, and M. Wohlmuther, “Activation of Targets and Accelerator Components at PSI -- A Comparison of Simulation and Measurement”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGD09, pp. 363-370.
Back to search