Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Kriznar, M. Plesko, M. Sekoranja, P. Kolaric, and W. Mexner, “Migration From ACS 1.1 to ACS 4 at ANKA”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_100.
[n] B. B. Baricevic, A. Kosicek, J. Menart, and M. Znidarcic, “Evaluation of New Generation Heavy Particle Beam Diagnostics Instrumentation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC123, pp. 1305-1307.
[n] S. Banna, L. Schachter, J. Nation, and P. Wang, “Interaction of TM01 and HEM11 in a TWT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA91, pp. 3609-3611.
[n] Z. Kakucs, P. Duval, and M. Clausen, “An EPICS to TINE Translator”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THBT005, pp. XX-XX.
[n] C. S. Taylor, “Performance of the PS Linac”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-9, pp. 353-361.
[n] J. Dovc, G. Milcinski, and M. Plesko, “A Guerilla Approach to Control System Development”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDT004, pp. XX-XX.
[n] I. Kriznar et al., “The Upgrade of the ANKA Control System to ACS (Advanced Control System)”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP541, pp. XX-XX.
[n] Y. Torun, D. L. Bowring, M. A. Palmer, and K. Yonehara, “RF Design and Operation of a Modular Cavity for Muon Ionization Cooling R&D”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 42-44. doi:10.18429/JACoW-IPAC2014-MOOCA02
[n] A. V. Smirnov, “Resonance Far-Field Accelerating Structures at Short Wavelengths”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA97, pp. 3615-3617.
[n] R. Boni, F. Marcellini, F. Sannibale, M. Vescovi, and G. Vignola, “DAFNE Linac Operational Performance”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07H, pp. 764-766.
[n] J. Galambos et al., “XAL Application Programming Framework”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE204, pp. XX-XX.
[n] A. Schempp, F. Botlo-Pilat, H. Deitinghoff, C. Thibault, and M. de Saint Simon, “A RFQ for the Deceleration of Antiprotons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1228-1231.
[n] U. Mavric, M. Felber, C. Gerth, H. Schlarb, W. Jalmuzna, and A. Piotrowski, “Preliminary Measurement Results of the Upgraded Energy BPM at FLASH”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR017, pp. 813-815.
[n] C. S. Taylor and Y. Dupuis, “The CERN-PS Linac - Beam Loading and RF Studies”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-1, pp. 239-251.
[n] M. Clausen et al., “An XML Driven Graphical User Interface and Application Management Toolkit”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THCT005, pp. XX-XX.
[n] J. Kamenik, “Management System Based on Open Source Tools”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_010.
[n] L. Parietti, N. K. Bultman, and Z. Chen, “Thermal/Structural Analysis and Frequency Shift Studies for the Spallation Neutron Source (SNS) Drift Tube Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA85, pp. 3591-3593.
[n] D. W. Christiansen, A. W. Magerski, H. J. Rodarte, P. Smith, and G. Spalek, “RF Cavity Design Automation for the APT CCDTL and CCL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA79, pp. 3573-3575.
[n] L. Somaschini et al., “Tuner System Assembly and Tests for the 201-MHz MICE Cavity”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA03, pp. 987-989.
[n] M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893.
[n] A. Schempp, H. Deitinghoff, M. de Saint Simon, C. Thibault, and F. Botlo-Pilat, “Deceleration of Antiprotons with a RFQ”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH435, pp. 683-685.
[n] G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
[n] M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
[n] B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983.
[n] W. J. Schneider et al., “A Load-Locked Gun for the Jefferson Lab Polarized Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA45, pp. 1991-1993.
[n] I. Kriznar, M. Plesko, A. Pucelj, A. Zupanc, and J. Galambos, “Cross-Platform and Cross-Accelerator Machine Physics Programs with Databush”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP548, pp. XX-XX.
[n] C. S. Mishra, “International Collaborations in ILC: R amp; D Issues”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEYMA01, pp. XX-XX.
[n] Y. Iwashita and A. Noda, “Massless Septum with Hybrid Magnet”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01E, pp. 2109-2110.
[n] C. S. Taylor, F. Block, F. Chiari, J. Huguenin, and P. T?¬tu, “CERN - PS 50 MeV Linac Progress Report”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-9, pp. 694-705.
[n] M. Steigerwald et al., “The New Polarized Beam Injection at MAMI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP02E, pp. 1430-1432.
[n] B. W. Allardyce, R. Hohbach, G. Le Dallic, and F. Nitsch, “The CERN Synchro-Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J33, pp. 442-444.
[n] C. S. Taylor, “Report on the ITEP 24.6 MeV and Serpukhov 100 MeV Linacs”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-10, pp. 706-712.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Kriznar, M. Plesko, M. Sekoranja, P. Kolaric, and W. Mexner, “Migration From ACS 1.1 to ACS 4 at ANKA”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_100.
- B. B. Baricevic, A. Kosicek, J. Menart, and M. Znidarcic, “Evaluation of New Generation Heavy Particle Beam Diagnostics Instrumentation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC123, pp. 1305-1307.
- S. Banna, L. Schachter, J. Nation, and P. Wang, “Interaction of TM01 and HEM11 in a TWT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA91, pp. 3609-3611.
- Z. Kakucs, P. Duval, and M. Clausen, “An EPICS to TINE Translator”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THBT005, pp. XX-XX.
- C. S. Taylor, “Performance of the PS Linac”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART3-9, pp. 353-361.
- J. Dovc, G. Milcinski, and M. Plesko, “A Guerilla Approach to Control System Development”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUDT004, pp. XX-XX.
- I. Kriznar et al., “The Upgrade of the ANKA Control System to ACS (Advanced Control System)”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP541, pp. XX-XX.
- Y. Torun, D. L. Bowring, M. A. Palmer, and K. Yonehara, “RF Design and Operation of a Modular Cavity for Muon Ionization Cooling R&D”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 42-44.
- A. V. Smirnov, “Resonance Far-Field Accelerating Structures at Short Wavelengths”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA97, pp. 3615-3617.
- R. Boni, F. Marcellini, F. Sannibale, M. Vescovi, and G. Vignola, “DAFNE Linac Operational Performance”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07H, pp. 764-766.
- J. Galambos et al., “XAL Application Programming Framework”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE204, pp. XX-XX.
- A. Schempp, F. Botlo-Pilat, H. Deitinghoff, C. Thibault, and M. de Saint Simon, “A RFQ for the Deceleration of Antiprotons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1228-1231.
- U. Mavric, M. Felber, C. Gerth, H. Schlarb, W. Jalmuzna, and A. Piotrowski, “Preliminary Measurement Results of the Upgraded Energy BPM at FLASH”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR017, pp. 813-815.
- C. S. Taylor and Y. Dupuis, “The CERN-PS Linac - Beam Loading and RF Studies”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART3-1, pp. 239-251.
- M. Clausen et al., “An XML Driven Graphical User Interface and Application Management Toolkit”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THCT005, pp. XX-XX.
- J. Kamenik, “Management System Based on Open Source Tools”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_010.
- L. Parietti, N. K. Bultman, and Z. Chen, “Thermal/Structural Analysis and Frequency Shift Studies for the Spallation Neutron Source (SNS) Drift Tube Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA85, pp. 3591-3593.
- D. W. Christiansen, A. W. Magerski, H. J. Rodarte, P. Smith, and G. Spalek, “RF Cavity Design Automation for the APT CCDTL and CCL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA79, pp. 3573-3575.
- L. Somaschini et al., “Tuner System Assembly and Tests for the 201-MHz MICE Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA03, pp. 987-989.
- M. Kenda, T. Beltram, T. Juretic, B. Repic, D. Skvarc, and C. Valentincic, “Simplified Instrument/Application Development and System Integration Using Libera Base Software Framework”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN009, pp. 890-893.
- A. Schempp, H. Deitinghoff, M. de Saint Simon, C. Thibault, and F. Botlo-Pilat, “Deceleration of Antiprotons with a RFQ”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH435, pp. 683-685.
- G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
- M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
- B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983.
- W. J. Schneider et al., “A Load-Locked Gun for the Jefferson Lab Polarized Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA45, pp. 1991-1993.
- I. Kriznar, M. Plesko, A. Pucelj, A. Zupanc, and J. Galambos, “Cross-Platform and Cross-Accelerator Machine Physics Programs with Databush”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP548, pp. XX-XX.
- C. S. Mishra, “International Collaborations in ILC: R amp; D Issues”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEYMA01, pp. XX-XX.
- Y. Iwashita and A. Noda, “Massless Septum with Hybrid Magnet”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP01E, pp. 2109-2110.
- C. S. Taylor, F. Block, F. Chiari, J. Huguenin, and P. T?¬tu, “CERN - PS 50 MeV Linac Progress Report”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-9, pp. 694-705.
- M. Steigerwald et al., “The New Polarized Beam Injection at MAMI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP02E, pp. 1430-1432.
- B. W. Allardyce, R. Hohbach, G. Le Dallic, and F. Nitsch, “The CERN Synchro-Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J33, pp. 442-444.
- C. S. Taylor, “Report on the ITEP 24.6 MeV and Serpukhov 100 MeV Linacs”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-10, pp. 706-712.
Back to search