Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. F. Stroosnijder and K. Abbas, “Thin Layer Activation for Materials Research Development at IAM of the European Commission”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-10, pp. 52-57.
[n] N. Delerue, G. Doucas, E. Maclean, and A. Reichold, “Longitudinal Bunch Profile Diagnostics in the 50-femtoseconds Range using Coherent Smith-Purcell Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE076, pp. 1155-1157.
[n] T. Spangenberg, D. Haas, and W. Mexner, “Smart Structured Measurement Process for Versatile Synchrotron Beamline Data at ANKA”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD19, pp. 40-42.
[n] W. S. Trzeciak, “A Wavelength Shifter" for the University of Wisconsin Electron Storage Ring"”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 213-217.
[n] F. Zimmermann et al., “Single-pass Beam Measurements for the Verification of the LHC Magnetic Model”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC015, pp. 489-491.
[n] K. Y. Ng, S. Y. Lee, and D. Trbojevic, “A Transitionless Lattice for the Fermilab Main Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 159-162.
[n] A. Hocker et al., “Individual RF Test Results of the Cavities Used in the First US-built ILC-type Cryomodule”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC049, pp. 2321-2323.
[n] M. Ferianis and R. De Monte, “The Low Gap BPM System at ELETTRA: Commissioning Results”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM06, pp. XX-XX.
[n] H. Liesem, “Resonance Free or Precessional Extraction - A Comparison”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C08, pp. XX-XX.
[n] W. S. Trzeciak, “Longitudinal Space Charge Effects in RF Buckets”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 612-624.
[n] R. Seviour, I. R. Bailey, and H. L. Owen, “Compact Accelerator Based Neutron Source for 99mTc Production”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1946-1949. doi:10.18429/JACoW-IPAC2016-TUPOY020
[n] M. Kondoh et al., “RF Accelerator in KEK Main Ring”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3950-3953.
[n] A. A. Drozdovsky et al., “Installation for the Research of Z-Pinch Plasma Initiated by the Electron Beam”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 258-260. doi:10.18429/JACoW-RUPAC2016-TUPSA020
[n] S. M. White, R. Alemany-Fernandez, H. Burkhardt, and M. Lamont, “First Luminosity Scans in the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC014, pp. 486-488.
[n] D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3621-3623. doi:10.18429/JACoW-IPAC2017-WEPVA150
[n] R. T. P. D, J. K. Jones, and B. D. Muratori, “Modelling of the EMMA ns-FFAG Ring Using GPT”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP136, pp. 1734-1736.
[n] S. L. Sheehy and C. Johnstone, “A 1 GeV CW FFAG High Intensity Proton Driver”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB003, pp. 3234-3236.
[n] J. A. Clarke et al., “Update on Commissioning and Operations with the Second Superconducting Wiggler at Daresbury”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 648-651.
[n] D. Haas, W. Mexner, H. Pasic, and T. Spangenberg, “Implementation of an Overall Data Management at the Tomography Station at ANKA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC005, pp. 558-561.
[n] M. Aicheler et al., “A Study of the Surface Quality of High Purity Copper after Heat Treatment”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS099, pp. 1771-1773.
[n] Korotaev I., “The PC Based Control and Data Acquisition System of LEPTA”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P54, pp. XX-XX.
[n] A. Facco et al., “Superconducting Resonators Development for the FRIB and ReA Linacs at MSU: Recent Achievements and Future Goals”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOOAC03, pp. 61-63.
[n] M. Kondoh et al., “RF Acceleration in KEK Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1533-1536.
[n] I. A. Ivanenko, B. Gikal, G. G. Gulbekyan, and N. Yu. Kazarinov, “DC280 Cyclotron Central Region with Independent Flat-Top System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS083, pp. 2703-2705.
[n] W. Fischer et al., “Construction Progress of the RHIC Electron Lenses”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBA01, pp. 2125-2127.
[n] V. Kain et al., “Stability of the LHC Transfer lines”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ025, pp. 3741-3743.
[n] G. J. Caporaso, “The Control of Beam Dynamics in High Energy Induction Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO2-1, pp. 17-21.
[n] M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septa for DAPhiNE Accumulator and Storage Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1472-1475.
[n] B. D. Muratori and D. J. Holder, “Matching with Space Charge”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC085, pp. 2192-2194.
[n] T. Yamamoto et al., “Progress of the Virtual Laboratory for Fusion Researches in Japan”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WED003, pp. 618-620.
[n] D. Trbojevic, “DESIGN OF A NON-SCALING FFAG ACCELERATOR FOR PROTON THERAPY”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P31, pp. XX-XX.
[n] J. J. Bisognano, R. A. Bosch, D. E. Eisert, M. A. Green, K. J. Kleman, and W. S. Trzeciak, “Operation of Aladdin at Lowered Emittance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH090, pp. 2671-2673.
[n] P. A. McIntosh, “Comparison of RF Cavity Designs for 3rd Generation Light Sources”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP017L, pp. 1955-1957.
[n] S. M. Ananiev et al., “Magnets for the COMBAS Large-Acceptance Spectrometer”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1370-1373.
[n] K. Yamasu et al., “Fabrication Technique of ACS Cavity for the JHP”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO430, pp. 126-128.
[n] X. Liu et al., “Influence of Magnet Errors and Waveguide Permeability on Magnetic Field Performance in Pure Permanent Undulators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA038, pp. 2214-2216.
[n] K. A. Brown, “Correlation of Beam Loss to Residual Activation in the AGS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 825-828.
[n] K. Cerff, D. Haas, J. Jakel, and M. Schmitt, “Setup and Diagnostics of Motion Control at ANKA Beamlines”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO018, pp. 198-200.
[n] K. Fujii et al., “Construction of a Test Magnet for JLC Final Focus”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU438, pp. 408-410.
[n] R. L. Bennett, “Ion Source Control through High Voltage Isolation Distances Utilizing photon-Coupled Solid State Devices”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 901-903.
[n] F. Bakkali Taheri et al., “Experimental and Theoretical Studies of the Properties of Coherent Smith-Purcell Radiation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 344-346. doi:10.18429/JACoW-IPAC2016-MOPMR041
[n] A. Lueangaramwong, H. Ghasem, I. Martin, and A. Morgan, “Study of aperture sharing injection scheme for Diamond-II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1152-1155. doi:10.18429/JACoW-IPAC2023-MOPM073
[n] S. Wilkes et al., “Isolating the light of a single bunch: determining the viability of operating vertical-plane Pulse Picking by Resonant Excitation at Diamond-II to serve timing mode users”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 308-314. doi:10.18429/JACoW-IBIC2025-TUBC01
[n] L. Du, Q. Z. Xing, and Y. Yang, “The Design, Construction and Experiments of a RFQ Cold Model at Tsinghua University”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3110-3112. doi:10.18429/JACoW-IPAC2014-THPRO095
[n] V. D. Dougar-Zhabon, E. A. Lamzin, Yu. P. Severgin, I. A. Shukeilo, and A. M. Umnov, “Some Methods of Generation of Multicharged Ions of Radioactive and Stable Isotopes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP06A, pp. 1406-1408.
[n] B. Bordini, R. Maccaferri, L. Rossi, and D. Tommasini, “Manufacture and Test of a Small Ceramic-insulated Nb3Sn Split Solenoid”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD003, pp. 2404-2406.
[n] Y. Iino et al., “Fabrication Technique of Drift Tube with Permanent Quadrupole Magnet for the Linac of the JHP”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO429, pp. 123-125.
[n] B. Kulke, M. Caplan, and R. Stever, “250 GHz Cold Tests for the LLNL CARM Experiment”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 763-766.
[n] R. Legg, B. Dunham, S. Higgins, R. Kazimi, D. Kehne, and T. Oren, “Interactive Troubleshooting Guide for Accelerators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P063, pp. 3755-3757.
[n] T. Kageyama, Y. Morozumi, Y. Yamazaki, and K. Yoshino, “A High-Power Moder of the ACS Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO438, pp. 150-152.
[n] F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
[n] Kanaya N., Katoh M., Sato S., Suzuki S., “Present Status of the Distributed Computer Control System for the 1.8 GeV Synchrotron Radiation Source TSRF at Tohoku University”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P57, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. F. Stroosnijder and K. Abbas, “Thin Layer Activation for Materials Research Development at IAM of the European Commission”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-10, pp. 52-57.
- N. Delerue, G. Doucas, E. Maclean, and A. Reichold, “Longitudinal Bunch Profile Diagnostics in the 50-femtoseconds Range using Coherent Smith-Purcell Radiation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE076, pp. 1155-1157.
- T. Spangenberg, D. Haas, and W. Mexner, “Smart Structured Measurement Process for Versatile Synchrotron Beamline Data at ANKA”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD19, pp. 40-42.
- W. S. Trzeciak, “A Wavelength Shifter" for the University of Wisconsin Electron Storage Ring"”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 213-217.
- F. Zimmermann et al., “Single-pass Beam Measurements for the Verification of the LHC Magnetic Model”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC015, pp. 489-491.
- K. Y. Ng, S. Y. Lee, and D. Trbojevic, “A Transitionless Lattice for the Fermilab Main Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 159-162.
- A. Hocker et al., “Individual RF Test Results of the Cavities Used in the First US-built ILC-type Cryomodule”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC049, pp. 2321-2323.
- M. Ferianis and R. De Monte, “The Low Gap BPM System at ELETTRA: Commissioning Results”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM06, pp. XX-XX.
- H. Liesem, “Resonance Free or Precessional Extraction - A Comparison”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C08, pp. XX-XX.
- W. S. Trzeciak, “Longitudinal Space Charge Effects in RF Buckets”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 612-624.
- R. Seviour, I. R. Bailey, and H. L. Owen, “Compact Accelerator Based Neutron Source for 99mTc Production”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1946-1949.
- M. Kondoh et al., “RF Accelerator in KEK Main Ring”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3950-3953.
- A. A. Drozdovsky et al., “Installation for the Research of Z-Pinch Plasma Initiated by the Electron Beam”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 258-260.
- S. M. White, R. Alemany-Fernandez, H. Burkhardt, and M. Lamont, “First Luminosity Scans in the LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC014, pp. 486-488.
- D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3621-3623.
- R. T. P. D, J. K. Jones, and B. D. Muratori, “Modelling of the EMMA ns-FFAG Ring Using GPT”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP136, pp. 1734-1736.
- S. L. Sheehy and C. Johnstone, “A 1 GeV CW FFAG High Intensity Proton Driver”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB003, pp. 3234-3236.
- J. A. Clarke et al., “Update on Commissioning and Operations with the Second Superconducting Wiggler at Daresbury”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 648-651.
- D. Haas, W. Mexner, H. Pasic, and T. Spangenberg, “Implementation of an Overall Data Management at the Tomography Station at ANKA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC005, pp. 558-561.
- M. Aicheler et al., “A Study of the Surface Quality of High Purity Copper after Heat Treatment”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS099, pp. 1771-1773.
- Korotaev I., “The PC Based Control and Data Acquisition System of LEPTA”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P54, pp. XX-XX.
- A. Facco et al., “Superconducting Resonators Development for the FRIB and ReA Linacs at MSU: Recent Achievements and Future Goals”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOOAC03, pp. 61-63.
- M. Kondoh et al., “RF Acceleration in KEK Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1533-1536.
- I. A. Ivanenko, B. Gikal, G. G. Gulbekyan, and N. Yu. Kazarinov, “DC280 Cyclotron Central Region with Independent Flat-Top System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS083, pp. 2703-2705.
- W. Fischer et al., “Construction Progress of the RHIC Electron Lenses”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOBA01, pp. 2125-2127.
- V. Kain et al., “Stability of the LHC Transfer lines”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ025, pp. 3741-3743.
- G. J. Caporaso, “The Control of Beam Dynamics in High Energy Induction Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO2-1, pp. 17-21.
- M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septa for DAPhiNE Accumulator and Storage Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1472-1475.
- B. D. Muratori and D. J. Holder, “Matching with Space Charge”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC085, pp. 2192-2194.
- T. Yamamoto et al., “Progress of the Virtual Laboratory for Fusion Researches in Japan”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WED003, pp. 618-620.
- D. Trbojevic, “DESIGN OF A NON-SCALING FFAG ACCELERATOR FOR PROTON THERAPY”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P31, pp. XX-XX.
- J. J. Bisognano, R. A. Bosch, D. E. Eisert, M. A. Green, K. J. Kleman, and W. S. Trzeciak, “Operation of Aladdin at Lowered Emittance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH090, pp. 2671-2673.
- P. A. McIntosh, “Comparison of RF Cavity Designs for 3rd Generation Light Sources”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP017L, pp. 1955-1957.
- S. M. Ananiev et al., “Magnets for the COMBAS Large-Acceptance Spectrometer”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1370-1373.
- K. Yamasu et al., “Fabrication Technique of ACS Cavity for the JHP”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO430, pp. 126-128.
- X. Liu et al., “Influence of Magnet Errors and Waveguide Permeability on Magnetic Field Performance in Pure Permanent Undulators”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA038, pp. 2214-2216.
- K. A. Brown, “Correlation of Beam Loss to Residual Activation in the AGS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 825-828.
- K. Cerff, D. Haas, J. Jakel, and M. Schmitt, “Setup and Diagnostics of Motion Control at ANKA Beamlines”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO018, pp. 198-200.
- K. Fujii et al., “Construction of a Test Magnet for JLC Final Focus”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU438, pp. 408-410.
- R. L. Bennett, “Ion Source Control through High Voltage Isolation Distances Utilizing photon-Coupled Solid State Devices”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 901-903.
- F. Bakkali Taheri et al., “Experimental and Theoretical Studies of the Properties of Coherent Smith-Purcell Radiation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 344-346.
- A. Lueangaramwong, H. Ghasem, I. Martin, and A. Morgan, “Study of aperture sharing injection scheme for Diamond-II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM073, pp. 1152-1155.
- S. Wilkes et al., “Isolating the light of a single bunch: determining the viability of operating vertical-plane Pulse Picking by Resonant Excitation at Diamond-II to serve timing mode users”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 308-314.
- L. Du, Q. Z. Xing, and Y. Yang, “The Design, Construction and Experiments of a RFQ Cold Model at Tsinghua University”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3110-3112.
- V. D. Dougar-Zhabon, E. A. Lamzin, Yu. P. Severgin, I. A. Shukeilo, and A. M. Umnov, “Some Methods of Generation of Multicharged Ions of Radioactive and Stable Isotopes”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP06A, pp. 1406-1408.
- B. Bordini, R. Maccaferri, L. Rossi, and D. Tommasini, “Manufacture and Test of a Small Ceramic-insulated Nb3Sn Split Solenoid”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD003, pp. 2404-2406.
- Y. Iino et al., “Fabrication Technique of Drift Tube with Permanent Quadrupole Magnet for the Linac of the JHP”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO429, pp. 123-125.
- B. Kulke, M. Caplan, and R. Stever, “250 GHz Cold Tests for the LLNL CARM Experiment”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 763-766.
- R. Legg, B. Dunham, S. Higgins, R. Kazimi, D. Kehne, and T. Oren, “Interactive Troubleshooting Guide for Accelerators”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P063, pp. 3755-3757.
- T. Kageyama, Y. Morozumi, Y. Yamazaki, and K. Yoshino, “A High-Power Moder of the ACS Cavity”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO438, pp. 150-152.
- F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
- Kanaya N., Katoh M., Sato S., Suzuki S., “Present Status of the Distributed Computer Control System for the 1.8 GeV Synchrotron Radiation Source TSRF at Tohoku University”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P57, pp. XX-XX.
Back to search