Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Andrews, A. Maschke, R. Mobley, and C. H. Rode, “Design of the 200 Ge V Slow Extracted Beam at NAL”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 262-266.
[n] P. Burrows et al., “Performance of the FONT3 Fast Analogue Intra-train Beam-based Feedback System at ATF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS123, pp. 852-854.
[n] R. Tatchyn, “Spectral-Angular Characteristics of the LCLS in the Near and Far Fields”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP028, pp. XX-XX.
[n] G. Danby et al., “Design and Measurement of the NSLS II Correctors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP009, pp. 148-150.
[n] M. Rehak, J. Bengtsson, G. Danby, J. W. Jackson, J. Skaritka, and C. J. Spataro, “Design of the NSLS II High Order Multipole Correctors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP006, pp. 139-141.
[n] W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
[n] W. P. Jones, D. V. Baxter, V. P. Derenchuk, T. Rinckel, and K. A. Solberg, “Non-Linear Beam Transport System for the LENS 7 MeV Proton Beam”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE021, pp. 1704-1706.
[n] D. J. Scott et al., “Design and Characterisation of the Focusing Solenoidal System for the CLARA High Repetition Rate Electron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4346-4348. doi:10.18429/JACoW-IPAC2017-THPIK107
[n] A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1659-1662.
[n] K. L. Erdman, “Special Aspects of Cyclotron RF-systems (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-01, pp. 141-145.
[n] L. A. Sarkisyan, “Passage of Integral Resonances in a Cyclotron Kaon Facility”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-26, pp. 324-325.
[n] O. Singh, S. Ramamoorthy, J. Sheehan, and J. Smith, “Upgrade of NSLS Timing System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA15, pp. 2223-2225.
[n] P. Burrows et al., “Design of the ILC Prototype FONT4 Digital Intra-train Beam-based Feedback System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS122, pp. 849-851.
[n] L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438.
[n] N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
[n] T. A. Schwarz et al., “Beam Tests of a High Pressure Gas-Filled Cavity for a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBA03, pp. 2131-2133.
[n] A. L. Vikharev et al., “100 MW Active X-BAND Pulse Compressor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA169, pp. 1474-1476.
[n] R. Hettel, R. Ortiz, J. Sebek, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP099L, pp. 1737-1739.
[n] G. Danby and J. Jackson, “Vacuum Chamber EDDY Current Correction Coil for the AGS Booster”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1035-1038.
[n] R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484.
[n] J. S. Diamond, A. Ibrahim, N. Liu, E. S. M. McCrory, and A. Semenov, “A VME and FPGA Based Data Acquisition System for Intensity Monitors”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 317-319. doi:10.18429/JACoW-NAPAC2016-TUPOA16
[n] J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 595-598.
[n] W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
[n] F. Caspers, B. Franzke, F. Nolden, and A. Schwinn, “First Experiments on Stochastic Cooling of Heavy Ion Beams at the ESR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP39G, pp. 1052-1054.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Andrews, A. Maschke, R. Mobley, and C. H. Rode, “Design of the 200 Ge V Slow Extracted Beam at NAL”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 262-266.
- P. Burrows et al., “Performance of the FONT3 Fast Analogue Intra-train Beam-based Feedback System at ATF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS123, pp. 852-854.
- R. Tatchyn, “Spectral-Angular Characteristics of the LCLS in the Near and Far Fields”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP028, pp. XX-XX.
- G. Danby et al., “Design and Measurement of the NSLS II Correctors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP009, pp. 148-150.
- M. Rehak, J. Bengtsson, G. Danby, J. W. Jackson, J. Skaritka, and C. J. Spataro, “Design of the NSLS II High Order Multipole Correctors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP006, pp. 139-141.
- W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
- W. P. Jones, D. V. Baxter, V. P. Derenchuk, T. Rinckel, and K. A. Solberg, “Non-Linear Beam Transport System for the LENS 7 MeV Proton Beam”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE021, pp. 1704-1706.
- D. J. Scott et al., “Design and Characterisation of the Focusing Solenoidal System for the CLARA High Repetition Rate Electron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4346-4348.
- A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1659-1662.
- K. L. Erdman, “Special Aspects of Cyclotron RF-systems (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-01, pp. 141-145.
- L. A. Sarkisyan, “Passage of Integral Resonances in a Cyclotron Kaon Facility”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-26, pp. 324-325.
- O. Singh, S. Ramamoorthy, J. Sheehan, and J. Smith, “Upgrade of NSLS Timing System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA15, pp. 2223-2225.
- P. Burrows et al., “Design of the ILC Prototype FONT4 Digital Intra-train Beam-based Feedback System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS122, pp. 849-851.
- L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438.
- N. I. Her et al., “Design of The Superconducting Magnet Supporting Post for KSTAR Tokamak”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH476, pp. 773-775.
- T. A. Schwarz et al., “Beam Tests of a High Pressure Gas-Filled Cavity for a Muon Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOBA03, pp. 2131-2133.
- A. L. Vikharev et al., “100 MW Active X-BAND Pulse Compressor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA169, pp. 1474-1476.
- R. Hettel, R. Ortiz, J. Sebek, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP099L, pp. 1737-1739.
- G. Danby and J. Jackson, “Vacuum Chamber EDDY Current Correction Coil for the AGS Booster”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1035-1038.
- R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484.
- J. S. Diamond, A. Ibrahim, N. Liu, E. S. M. McCrory, and A. Semenov, “A VME and FPGA Based Data Acquisition System for Intensity Monitors”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 317-319.
- J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 595-598.
- W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
- F. Caspers, B. Franzke, F. Nolden, and A. Schwinn, “First Experiments on Stochastic Cooling of Heavy Ion Beams at the ESR”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP39G, pp. 1052-1054.
Back to search