Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 54-57.
[n] D. Bloess, D. Dekkers, E. Sandels, and G. Shering, “Measurement of the CERN Slow Ejected Beam Time Structure”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 973-976.
[n] Y. Derbenev, “Prospects of High Energy Electron Cooling”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOZE03, pp. 8-12.
[n] D. E. Suddeth, R. L. Kustom, and D. Schmitt, “Zero Gradient Synchrotron Booster Injection”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1488-1492.
[n] F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007.
[n] J. Balsamo, N. M. Fewell, J. D. Klein, and R. L. Witkover, “Long Radiation Detector System for Beam Loss Monitoring”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1807-1810.
[n] L. Coull, D. Hagedorn, G. Krainz, F. Rodriguez-Mateos, and R. Schmidt, “Electrodynamic Behaviour of the LHC Superconducting Magnet String during a Discharge”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP017G, pp. 2240-2242.
[n] R. M. Lill, N. Sereno, and B. X. Yang, “BPM Stabiltiy Studies for the APS MBA Upgrade”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 55-58. doi:10.18429/JACoW-IBIC2016-MOPG10
[n] U. Lehnert, A. Buechner, B. Lange, R. Schurig, and R. Steinbr?â, “BPM Electronics for the ELBE Linear Accelerator - a Comparison”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 75-77. doi:10.18429/JACoW-IBIC2016-MOPG15
[n] L. Perrot, M. Kemel, and S. Rousselot, “Benchmark Analyses of Electrostatic Devices for SPIRAL2-DESIR Beam Lines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3225-3227. doi:10.18429/JACoW-IPAC2018-THPAK009
[n] M. Vogt, J. A. Ellison, W. Fischer, and T. Sen, “Simulations of Coherent Beam-Beam Modes at RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI005, pp. 1428-1430.
[n] Z. Zaharieva and R. Billen, “Rapid Development of Database Interfaces with Oracle APEX, Used for the Controls Systems at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP108, pp. 883-885.
[n] R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 59-63. doi:10.18429/JACoW-ICALEPCS2017-MOCPL03
[n] T. P. Perron, B. Ogier, A. Panzarella, E. Plouviez, E. Rabeuf, and V. Serriere, “New Preinjector for the ESRF Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC087, pp. 2195-2197.
[n] E. Plouviez, F. Epaud, L. Farvacque, and J. M. Koch, “Optimisation of the SVD Treatment in the Fast Orbit Correction of the ESRF Storage Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC13, pp. 694-697.
[n] F. J. Cullinan, S. T. Boogert, N. Y. Joshi, and A. Lyapin, “Calibration Errors in the Cavity Beam Position Monitor System at the ATF2”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC025, pp. 1051-1053.
[n] E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 752-755. doi:10.18429/JACoW-IPAC2025-MOPS061
[n] G. P. A. Berg et al., “Modes of Operation for the Cooler Ring COSY”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper O04, pp. 601-604.
[n] J. Pasternak et al., “The MICE Demonstration of Lonization Cooling”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4023-4026. doi:10.18429/JACoW-IPAC2015-THPF129
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] Yu. Ya. Golub, “Axisymmetric Vortices in Axisymmetric Inhomogeneous Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE111, pp. 1253-1254.
[n] E. Acerbi, C. Birattari, M. Castiglioni, C. DeMartinis, and F. G. Resmini, “H- Beam Intensity Improvements at the Milan AVF Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-13, pp. 386-389.
[n] B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
[n] J. F. Sheehan, R. F. Lankshear, and R. L. Witkover, “The RF System for the AGS Linac Injector”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 217-223.
[n] M. Ivanyan and V. Tsakanov, “The Analytical Treatment of Resistive Wake in Round Pipe”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH308, pp. 3194-3196.
[n] D. Manglunki et al., “Ions for LHC: Status of the Injector Chain”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA084, pp. 226-228.
[n] J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119.
[n] A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4037-4039. doi:10.18429/JACoW-IPAC2017-THPAB135
[n] R. L. Warnock, Y. Cai, and J. A. Ellison, “Construction of Large-Period Symplectic Maps by Interpolative Methods”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IOPK04, pp. 6-11.
[n] S. Wilde et al., “Development of Thin Films for Superconducting RF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2406-2408. doi:10.18429/JACoW-IPAC2014-WEPME058
[n] R. Burger, D. J. Clark, E. Close, and H. Kim, “Machine Development at the Berkeley 88-Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-009, pp. XX-XX.
[n] M. A. Leonova et al., “Study of Electronegative Gas Effect in Beam-Induced Plasma”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC040, pp. 220-222.
[n] M. M. Shehab and G. Vignola, “Mechanical Design Considerations for Sesame Main Subsystems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN047, pp. 263-265.
[n] J. E. Allinger, G. T. Danby, J. W. Jackson, and L. W. Smith, “Large Cost Reductions Made Possible by Reevaluation of Beam Transoprt Parameters”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 797-802.
[n] C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 54-57.
- D. Bloess, D. Dekkers, E. Sandels, and G. Shering, “Measurement of the CERN Slow Ejected Beam Time Structure”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 973-976.
- Y. Derbenev, “Prospects of High Energy Electron Cooling”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOZE03, pp. 8-12.
- D. E. Suddeth, R. L. Kustom, and D. Schmitt, “Zero Gradient Synchrotron Booster Injection”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1488-1492.
- F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007.
- J. Balsamo, N. M. Fewell, J. D. Klein, and R. L. Witkover, “Long Radiation Detector System for Beam Loss Monitoring”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1807-1810.
- L. Coull, D. Hagedorn, G. Krainz, F. Rodriguez-Mateos, and R. Schmidt, “Electrodynamic Behaviour of the LHC Superconducting Magnet String during a Discharge”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP017G, pp. 2240-2242.
- R. M. Lill, N. Sereno, and B. X. Yang, “BPM Stabiltiy Studies for the APS MBA Upgrade”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 55-58.
- U. Lehnert, A. Buechner, B. Lange, R. Schurig, and R. Steinbr?â, “BPM Electronics for the ELBE Linear Accelerator - a Comparison”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 75-77.
- L. Perrot, M. Kemel, and S. Rousselot, “Benchmark Analyses of Electrostatic Devices for SPIRAL2-DESIR Beam Lines”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3225-3227.
- M. Vogt, J. A. Ellison, W. Fischer, and T. Sen, “Simulations of Coherent Beam-Beam Modes at RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI005, pp. 1428-1430.
- Z. Zaharieva and R. Billen, “Rapid Development of Database Interfaces with Oracle APEX, Used for the Controls Systems at CERN”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP108, pp. 883-885.
- R. K. Mastyna, E. Blanco Vinuela, J. Casas, N. Trikoupis, and M. Felser, “PROFINET Communication Card for the CERN Cryogenics Crate Electronics Instrumentation”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 59-63.
- T. P. Perron, B. Ogier, A. Panzarella, E. Plouviez, E. Rabeuf, and V. Serriere, “New Preinjector for the ESRF Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC087, pp. 2195-2197.
- E. Plouviez, F. Epaud, L. Farvacque, and J. M. Koch, “Optimisation of the SVD Treatment in the Fast Orbit Correction of the ESRF Storage Ring”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC13, pp. 694-697.
- F. J. Cullinan, S. T. Boogert, N. Y. Joshi, and A. Lyapin, “Calibration Errors in the Cavity Beam Position Monitor System at the ATF2”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC025, pp. 1051-1053.
- E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS061, pp. 752-755.
- G. P. A. Berg et al., “Modes of Operation for the Cooler Ring COSY”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper O04, pp. 601-604.
- J. Pasternak et al., “The MICE Demonstration of Lonization Cooling”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4023-4026.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- Yu. Ya. Golub, “Axisymmetric Vortices in Axisymmetric Inhomogeneous Beams”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE111, pp. 1253-1254.
- E. Acerbi, C. Birattari, M. Castiglioni, C. DeMartinis, and F. G. Resmini, “H- Beam Intensity Improvements at the Milan AVF Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-13, pp. 386-389.
- B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
- J. F. Sheehan, R. F. Lankshear, and R. L. Witkover, “The RF System for the AGS Linac Injector”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 217-223.
- M. Ivanyan and V. Tsakanov, “The Analytical Treatment of Resistive Wake in Round Pipe”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH308, pp. 3194-3196.
- D. Manglunki et al., “Ions for LHC: Status of the Injector Chain”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA084, pp. 226-228.
- J. Holmes, S. Cousineau, V. Danilov, A. Fedotov, S. Henderson, and A. Shishlo, “Computational Studies of Collective Beam Dynamics in High Intensity Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAA005, pp. 117-119.
- A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4037-4039.
- R. L. Warnock, Y. Cai, and J. A. Ellison, “Construction of Large-Period Symplectic Maps by Interpolative Methods”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IOPK04, pp. 6-11.
- S. Wilde et al., “Development of Thin Films for Superconducting RF Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2406-2408.
- R. Burger, D. J. Clark, E. Close, and H. Kim, “Machine Development at the Berkeley 88-Inch Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-009, pp. XX-XX.
- M. A. Leonova et al., “Study of Electronegative Gas Effect in Beam-Induced Plasma”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC040, pp. 220-222.
- M. M. Shehab and G. Vignola, “Mechanical Design Considerations for Sesame Main Subsystems”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN047, pp. 263-265.
- J. E. Allinger, G. T. Danby, J. W. Jackson, and L. W. Smith, “Large Cost Reductions Made Possible by Reevaluation of Beam Transoprt Parameters”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 797-802.
- C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
Back to search