Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Kanareykin, W. Gai, C.-J. Jing, A. L. Kustov, J. G. Power, and P. Schoessow, “Studies of Beam Breakup in Dielectric Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP063, pp. 2939-2941.
[n] E. Weihreter et al., “Simulation of Fundamental Mode Evanescent Fields in a HOM Damping Waveguide and Comparison with Measurements”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE085, pp. 2199-2201.
[n] K. E. Robinson and T. E. DeHart, “Inner Undulator Electron Diagnostic Stations”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 449-452.
[n] M.-C. Lin, C. H. Lo, M.-R. Lu, and M.-K. Yeh, “Multi-physics Computation and Deformation Testing of a Shell-type 1.5-GHz Cavity”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2968-2971. doi:10.18429/JACoW-IPAC2019-WEPRB065
[n] J. Grimm, T. T. Arkan, M. H. Foley, T. N. Khabiboulline, and D. J. Watkins, “1.3 GHz RF Nb Cavity to Ti Helium Vessel TIG Welding Process at Fermilab”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO041, pp. 669-671.
[n] Y. Holler, O. Kaul, and K. Sinram, “Field Measurements and Sorting of the HERA E-Ring Dipoles”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1154-1157.
[n] P. Piot et al., “Longitudinal Beam Diagnostics for the ILC Injectors and Bunch Compressors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP011, pp. 3971-3973.
[n] M. B?Âge, M. Aiba, A. L??deke, N. Milas, and A. Streun, “The Swiss Light Source a Test-bed" for Damping Ring Optimization"”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE091, pp. 3560-3562.
[n] Y.-E. S. Sun, K.-J. Kim, P. Piot, J. G. Power, and M. M. Rihaoui, “Design Study of a Transverse-to-Longitudinal Emittance Exchange Proof-of-principle Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN094, pp. 3441-3443.
[n] P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX.
[n] A. Valentinov, A. Kadnikov, Y. Krylov, S. Kuznetsov, and Y. Yupinov, “Control System of the Synchrotron Radiation Source SIBERIA-2”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA04, pp. 2199-2201.
[n] A. N. Ermakov et al., “Rectangular Accelerating-Focusing Structure High Power Tests”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B02, pp. 889-891.
[n] M. M?ñrki, R. H?ñussler, P. Lanz, H. P. Leber, N. Schmid, and U. Schryber, “Generation of a High Voltage Trapezoidal Wave Form for a us-Pulsed Beam System at S.I.N.”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-17, pp. 2190-2193.
[n] H. Herminghaus et al., “Status Report on the Normal Conducting cw Racetrack Microtron Cascade MAMI""”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3274-3279.
[n] T. Tomimasu, M. Chiwaki, T. Mikado, T. Noguchi, S. Sugiyama, and T. Yamazaki, “A 600-MeV ETL Electron Storage Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3133-3136.
[n] G. Le Meur and F. Touze, “PRIAM: A Self Consistent Finite Element Code for Particle Simulation in Electromagnetic Fields”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1693-1696.
[n] M. Dehn and H. J. Kreidel, “The Control System of the Harmonic Double Sided Microtron at MAMI”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA07, pp. 331-333.
[n] J. E. Goodwin and S. M. Pruss, “Chromaticity Modelling in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 294-297.
[n] L. Panitzsch, C. Helmke, L. Seimetz, M. Stalder, and R. F. Wimmer-Schweingruber, “High-Resolution Beam-Profile Measurements with a Faraday-Cup Array”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-24, pp. 126-126.
[n] K. G. Meisner, J. E. Griffin, E. F. Higgins, and S. P. Jachim, “A New Low Level RF System for the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4061-4063.
[n] H. Liebermann, H. Podlech, U. Ratzinger, and A. Sauer, “Design of a Superconducting CH-Cavity for Low- and Medium Beta Ion and Proton Acceleration”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB042, pp. 2820-2822.
[n] H. Bluem et al., “Accelerator Beamline Performance for the IR FEL at the Fritz-Haber-Institut, Berlin”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEOC04, pp. 365-368.
[n] S. Hillert et al., “The Beam Trajectory Monitor for the TTF-FEL at DESY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B11, pp. 1803-1805.
[n] M. Penno et al., “A configurable Interlock System for RF Stations at XFEL”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ03, pp. 159-161.
[n] I. Vilches Calvo, R. Barillere, and G. Thomas, “The Virtual UNICOS Process Expert: Integration of Artificial Intelligence Tools in Industrial Control Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP033, pp. 158-160.
[n] V. G. Andreev et al., “Design Problems of High Energy CW Ion Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-07, pp. 621-623.
[n] R. W. Allison et al., “Digital Control of the Bevatron-Injector Inflection Trajectory”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IX-07, pp. 483-490.
[n] E. P. Colton, “Slow Extraction at the SSC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2442-2444.
[n] G. J. Yang, S. Chen, X. Jiang, and Z. Zhang, “Time-resolved Beam Emittance Measurement of Dragon-I Linear Induction Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH067, pp. 1166-1168.
[n] J. Teichert et al., “Progress of the Rossendorf SRF Gun Project”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP034, pp. XX-XX.
[n] W. E. Fox and R. G. Schamaun, “The FMIT Experimental Draft Tube”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2761-2764.
[n] S. Sheynin, F. Lopez, and S. V. Milton, “The APS Direct-Drive Pulsed Septum Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP12, pp. 1355-1357.
[n] T. Hiatt et al., “Fabrication and Measurement of 12 GeV Prototype Quadrupoles at Thomas Jefferson National Accelerator Facility”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP037, pp. 223-225.
[n] B. Aune and R. H. Miller, “New Method for Positron Production at SLAC”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-7, pp. 440-443.
[n] S. K. Guharay, L. K. Len, and F. Mako, “High-Current Micro-Pulse Electron Guns and Accelerator Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH004, pp. 2084-2086.
[n] I. Rutkowski, M. Grzegrz??lka, L. Butkowski, Ch. Schmidt, and M. Kuntzsch, “Real-time Beam Loading Compensation for Single SRF Cavity LLRF Regulation”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 295-297. doi:10.18429/JACoW-ICALEPCS2015-MOPGF093
[n] S. Baird et al., “The Antiproton Decelerator: AD”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W009, pp. 979-981.
[n] B. Goddard, M. Gyr, J. Uythoven, R. Veness, and W. Weterings, “LHC Beam Dumping System: Extraction Channel Layout and Acceptance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB009, pp. 1646-1648.
[n] R. Gluckstern and F. Neri, “Longitudinal Coupling Impedance and its High Frequency Behavior”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-21, pp. 359-361.
[n] A. N. Ermakov et al., “Commissioning of High Efficiency Standing Wave Linac for Industrial Applications”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 99-101. doi:10.18429/JACoW-RUPAC2016-WECDMH01
[n] A. I. Karev et al., “55 MeV Special Purpose Race-Track Microtron Commissioning”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHD01, pp. 316-318.
[n] H. R. Yang et al., “Commissioning Scenario for L-band Electron Accelerator by PARMELA Code”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN047, pp. 2820-2822.
[n] J. Xie, “Development of Linear Accelerators in China”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0003, pp. 14-18.
[n] C. Montag, R. Bonati, J. M. Brennan, J. Butler, and P. Koello, “Measurements of Mechanical Triplet Vibrations in RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE054, pp. 1267-1269.
[n] D. Boehne, “Synchrotrons for Cancer Therapy”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 217-222.
[n] M. Eiche, K. L. Erdman, P. Lanz, M. Lipnicki, and M. Zach, “Dual Frequency Resonator System for a Compact Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XA-03, pp. 515-518.
[n] M. Masuda, S. Matsumoto, and T. Shintomi, “Flicker Suppressor by Thyristor”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1306-1309.
[n] S. Kato, H. Hayano, T. Kubo, T. Noguchi, T. Saeki, and M. Sawabe, “Study on Niobium Scratch and Tantalum or Carbonaceous Contamination at Niobium Surface with Field Emission Scanner”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP108, pp. 731-735.
[n] M. Liepe et al., “Overview of the Cornell ERL Injector Cryomodule”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB052, pp. 1317-1319.
[n] V. Rossi, “General Purpose Digital Signal Processing VME-Module for 1-Turn Delay Feedback Systems of the CERN Accelerator Chain”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP076, pp. 2186-2188.
[n] S. P. M?©ller et al., “A Novel Proton and Light Ion Synchrotron for Particle Therapy”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH160, pp. 2305-2307.
[n] J. Musson, K. Macha, H. L. Phillips, W. Cao, and H. Elsayed-Ali, “A New Method for Grain Texture Manipulation in Post-Deposition Niobium Films”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 221-224. doi:10.18429/JACoW-NAPAC2016-MOPOB68
[n] S. C. Kim, G. S. Lee, M. H. Cho, and I. S. Ko, “Development of High Performance Magnet Power Supply”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D066, pp. 561-563.
[n] C. F. Afonso et al., “Integrating Mobile Devices Into CNAO's Control System, a Web Service Approach to Device Communication”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 191. doi:10.18429/JACoW-ICALEPCS2019-MOPHA003
[n] P. Spentzouris and D. Neuffer, “Design and Simulation studies of an Ionization Cooling channel using lithium lenses and solenoid transport channels.”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP56, pp. 3083-3085.
[n] A. V. Bubley et al., “Commissioning of the 60 keV Electron Cooler for the NICA Booster”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 453-455. doi:10.18429/JACoW-RUPAC2016-WEPSB040
[n] R. Becker, H. Hoeltermann, O. Kester, M. Kleinod, A. Schempp, and B. Zipfel, “The EBIS Option for Hadron Therapy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP09C, pp. 2345-2347.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Kanareykin, W. Gai, C.-J. Jing, A. L. Kustov, J. G. Power, and P. Schoessow, “Studies of Beam Breakup in Dielectric Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP063, pp. 2939-2941.
- E. Weihreter et al., “Simulation of Fundamental Mode Evanescent Fields in a HOM Damping Waveguide and Comparison with Measurements”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE085, pp. 2199-2201.
- K. E. Robinson and T. E. DeHart, “Inner Undulator Electron Diagnostic Stations”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 449-452.
- M.-C. Lin, C. H. Lo, M.-R. Lu, and M.-K. Yeh, “Multi-physics Computation and Deformation Testing of a Shell-type 1.5-GHz Cavity”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2968-2971.
- J. Grimm, T. T. Arkan, M. H. Foley, T. N. Khabiboulline, and D. J. Watkins, “1.3 GHz RF Nb Cavity to Ti Helium Vessel TIG Welding Process at Fermilab”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO041, pp. 669-671.
- Y. Holler, O. Kaul, and K. Sinram, “Field Measurements and Sorting of the HERA E-Ring Dipoles”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1154-1157.
- P. Piot et al., “Longitudinal Beam Diagnostics for the ILC Injectors and Bunch Compressors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP011, pp. 3971-3973.
- M. B?Âge, M. Aiba, A. L??deke, N. Milas, and A. Streun, “The Swiss Light Source a Test-bed" for Damping Ring Optimization"”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE091, pp. 3560-3562.
- Y.-E. S. Sun, K.-J. Kim, P. Piot, J. G. Power, and M. M. Rihaoui, “Design Study of a Transverse-to-Longitudinal Emittance Exchange Proof-of-principle Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN094, pp. 3441-3443.
- P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX.
- A. Valentinov, A. Kadnikov, Y. Krylov, S. Kuznetsov, and Y. Yupinov, “Control System of the Synchrotron Radiation Source SIBERIA-2”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA04, pp. 2199-2201.
- A. N. Ermakov et al., “Rectangular Accelerating-Focusing Structure High Power Tests”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B02, pp. 889-891.
- M. M?ñrki, R. H?ñussler, P. Lanz, H. P. Leber, N. Schmid, and U. Schryber, “Generation of a High Voltage Trapezoidal Wave Form for a us-Pulsed Beam System at S.I.N.”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-17, pp. 2190-2193.
- H. Herminghaus et al., “Status Report on the Normal Conducting cw Racetrack Microtron Cascade MAMI""”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3274-3279.
- T. Tomimasu, M. Chiwaki, T. Mikado, T. Noguchi, S. Sugiyama, and T. Yamazaki, “A 600-MeV ETL Electron Storage Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3133-3136.
- G. Le Meur and F. Touze, “PRIAM: A Self Consistent Finite Element Code for Particle Simulation in Electromagnetic Fields”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1693-1696.
- M. Dehn and H. J. Kreidel, “The Control System of the Harmonic Double Sided Microtron at MAMI”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA07, pp. 331-333.
- J. E. Goodwin and S. M. Pruss, “Chromaticity Modelling in the Fermilab Main Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 294-297.
- L. Panitzsch, C. Helmke, L. Seimetz, M. Stalder, and R. F. Wimmer-Schweingruber, “High-Resolution Beam-Profile Measurements with a Faraday-Cup Array”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-24, pp. 126-126.
- K. G. Meisner, J. E. Griffin, E. F. Higgins, and S. P. Jachim, “A New Low Level RF System for the Fermilab Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4061-4063.
- H. Liebermann, H. Podlech, U. Ratzinger, and A. Sauer, “Design of a Superconducting CH-Cavity for Low- and Medium Beta Ion and Proton Acceleration”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB042, pp. 2820-2822.
- H. Bluem et al., “Accelerator Beamline Performance for the IR FEL at the Fritz-Haber-Institut, Berlin”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEOC04, pp. 365-368.
- S. Hillert et al., “The Beam Trajectory Monitor for the TTF-FEL at DESY”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B11, pp. 1803-1805.
- M. Penno et al., “A configurable Interlock System for RF Stations at XFEL”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ03, pp. 159-161.
- I. Vilches Calvo, R. Barillere, and G. Thomas, “The Virtual UNICOS Process Expert: Integration of Artificial Intelligence Tools in Industrial Control Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP033, pp. 158-160.
- V. G. Andreev et al., “Design Problems of High Energy CW Ion Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-07, pp. 621-623.
- R. W. Allison et al., “Digital Control of the Bevatron-Injector Inflection Trajectory”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IX-07, pp. 483-490.
- E. P. Colton, “Slow Extraction at the SSC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2442-2444.
- G. J. Yang, S. Chen, X. Jiang, and Z. Zhang, “Time-resolved Beam Emittance Measurement of Dragon-I Linear Induction Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH067, pp. 1166-1168.
- J. Teichert et al., “Progress of the Rossendorf SRF Gun Project”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP034, pp. XX-XX.
- W. E. Fox and R. G. Schamaun, “The FMIT Experimental Draft Tube”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2761-2764.
- S. Sheynin, F. Lopez, and S. V. Milton, “The APS Direct-Drive Pulsed Septum Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP12, pp. 1355-1357.
- T. Hiatt et al., “Fabrication and Measurement of 12 GeV Prototype Quadrupoles at Thomas Jefferson National Accelerator Facility”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP037, pp. 223-225.
- B. Aune and R. H. Miller, “New Method for Positron Production at SLAC”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-7, pp. 440-443.
- S. K. Guharay, L. K. Len, and F. Mako, “High-Current Micro-Pulse Electron Guns and Accelerator Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH004, pp. 2084-2086.
- I. Rutkowski, M. Grzegrz??lka, L. Butkowski, Ch. Schmidt, and M. Kuntzsch, “Real-time Beam Loading Compensation for Single SRF Cavity LLRF Regulation”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 295-297.
- S. Baird et al., “The Antiproton Decelerator: AD”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W009, pp. 979-981.
- B. Goddard, M. Gyr, J. Uythoven, R. Veness, and W. Weterings, “LHC Beam Dumping System: Extraction Channel Layout and Acceptance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB009, pp. 1646-1648.
- R. Gluckstern and F. Neri, “Longitudinal Coupling Impedance and its High Frequency Behavior”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-21, pp. 359-361.
- A. N. Ermakov et al., “Commissioning of High Efficiency Standing Wave Linac for Industrial Applications”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 99-101.
- A. I. Karev et al., “55 MeV Special Purpose Race-Track Microtron Commissioning”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHD01, pp. 316-318.
- H. R. Yang et al., “Commissioning Scenario for L-band Electron Accelerator by PARMELA Code”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN047, pp. 2820-2822.
- J. Xie, “Development of Linear Accelerators in China”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOA0003, pp. 14-18.
- C. Montag, R. Bonati, J. M. Brennan, J. Butler, and P. Koello, “Measurements of Mechanical Triplet Vibrations in RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE054, pp. 1267-1269.
- D. Boehne, “Synchrotrons for Cancer Therapy”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 217-222.
- M. Eiche, K. L. Erdman, P. Lanz, M. Lipnicki, and M. Zach, “Dual Frequency Resonator System for a Compact Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XA-03, pp. 515-518.
- M. Masuda, S. Matsumoto, and T. Shintomi, “Flicker Suppressor by Thyristor”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1306-1309.
- S. Kato, H. Hayano, T. Kubo, T. Noguchi, T. Saeki, and M. Sawabe, “Study on Niobium Scratch and Tantalum or Carbonaceous Contamination at Niobium Surface with Field Emission Scanner”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP108, pp. 731-735.
- M. Liepe et al., “Overview of the Cornell ERL Injector Cryomodule”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB052, pp. 1317-1319.
- V. Rossi, “General Purpose Digital Signal Processing VME-Module for 1-Turn Delay Feedback Systems of the CERN Accelerator Chain”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP076, pp. 2186-2188.
- S. P. M?©ller et al., “A Novel Proton and Light Ion Synchrotron for Particle Therapy”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH160, pp. 2305-2307.
- J. Musson, K. Macha, H. L. Phillips, W. Cao, and H. Elsayed-Ali, “A New Method for Grain Texture Manipulation in Post-Deposition Niobium Films”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 221-224.
- S. C. Kim, G. S. Lee, M. H. Cho, and I. S. Ko, “Development of High Performance Magnet Power Supply”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D066, pp. 561-563.
- C. F. Afonso et al., “Integrating Mobile Devices Into CNAO's Control System, a Web Service Approach to Device Communication”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 191.
- P. Spentzouris and D. Neuffer, “Design and Simulation studies of an Ionization Cooling channel using lithium lenses and solenoid transport channels.”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP56, pp. 3083-3085.
- A. V. Bubley et al., “Commissioning of the 60 keV Electron Cooler for the NICA Booster”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 453-455.
- R. Becker, H. Hoeltermann, O. Kester, M. Kleinod, A. Schempp, and B. Zipfel, “The EBIS Option for Hadron Therapy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP09C, pp. 2345-2347.
Back to search