Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Watanabe, T. Asaka, H. Ego, H. Hanaki, S. Kimura, and K. Sato, “Duct-Shaped SiC Dummy Load of L-band Power Distribution System for XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA024, pp. 3729-3731.
[n] T et al., “The Characteristics of Different Magnetic Material for RF Cavity under Perpendicular Magnetization”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D015, pp. 417-419.
[n] K. J. Doshi et al., “A Large Channel Count Multi Client Data Acquisition System for Superconducting Magnet System of SST-1”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD12, pp. 26-28.
[n] K. Endo et al., “Medical Synchrotron for Proton Therapy”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1459-1462.
[n] T. S. Dixit, Y. Shimosaki, and K. Takayama, “Adiabatic Damping During Acceleration in the Induction Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN033, pp. 4009-4011.
[n] M. Yoshii et al., “Proton Beam Acceleration with MA Loaded RF Systems in J-PARC RCS and MR Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAC04, pp. 770-772.
[n] K. Imai et al., “Beam Science Facility with Combination of Ion and Electron Storage Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A08, pp. 563-565.
[n] N. Nakamura, K. Haga, T. Nogami, and M. Tadano, “Study of PF-Ring Infrastructure Improvements Using Temperature Measurements in the Ring Tunnel”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1508-1511. doi:10.18429/JACoW-IPAC2021-TUPAB063
[n] K. Endo and K. Mishima, “Survey Meshes for Synchrotron Magnet Alignment”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A09, pp. 2385-2387.
[n] Y. Fuwa, Y. Iwashita, H. Tongu, M. Ichikawa, and N. Miyawaki, “Development of Compact H+ ECR Ion Source with Pulse Gas Valve”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 98-100. doi:10.18429/JACoW-ECRIS2016-WEPP08
[n] T. Obina, W. X. Cheng, K. Haga, T. Honda, and M. Tadano, “Present Status and Upgrade of BPM System in KEK Photon Factory”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT023, pp. XX-XX.
[n] K. Haga et al., “Global Feedback System For Photon Factory Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP31F, pp. 1726-1728.
[n] P. Li, J. X. Wu, Y. Q. Yang, and Y. J. Yuan, “The Design of Transverse Emittance Measurement at HIRFL-CSR”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP109, pp. 272-274.
[n] K. Endo, K. Muto, S. Ninomiya, and M. Toda, “Non-Resonant RF Accelerating System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B02, pp. 1981-1983.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Watanabe, T. Asaka, H. Ego, H. Hanaki, S. Kimura, and K. Sato, “Duct-Shaped SiC Dummy Load of L-band Power Distribution System for XFEL/SPring-8”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA024, pp. 3729-3731.
- T et al., “The Characteristics of Different Magnetic Material for RF Cavity under Perpendicular Magnetization”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D015, pp. 417-419.
- K. J. Doshi et al., “A Large Channel Count Multi Client Data Acquisition System for Superconducting Magnet System of SST-1”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD12, pp. 26-28.
- K. Endo et al., “Medical Synchrotron for Proton Therapy”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1459-1462.
- T. S. Dixit, Y. Shimosaki, and K. Takayama, “Adiabatic Damping During Acceleration in the Induction Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN033, pp. 4009-4011.
- M. Yoshii et al., “Proton Beam Acceleration with MA Loaded RF Systems in J-PARC RCS and MR Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAC04, pp. 770-772.
- K. Imai et al., “Beam Science Facility with Combination of Ion and Electron Storage Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A08, pp. 563-565.
- N. Nakamura, K. Haga, T. Nogami, and M. Tadano, “Study of PF-Ring Infrastructure Improvements Using Temperature Measurements in the Ring Tunnel”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1508-1511.
- K. Endo and K. Mishima, “Survey Meshes for Synchrotron Magnet Alignment”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A09, pp. 2385-2387.
- Y. Fuwa, Y. Iwashita, H. Tongu, M. Ichikawa, and N. Miyawaki, “Development of Compact H+ ECR Ion Source with Pulse Gas Valve”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 98-100.
- T. Obina, W. X. Cheng, K. Haga, T. Honda, and M. Tadano, “Present Status and Upgrade of BPM System in KEK Photon Factory”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT023, pp. XX-XX.
- K. Haga et al., “Global Feedback System For Photon Factory Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP31F, pp. 1726-1728.
- P. Li, J. X. Wu, Y. Q. Yang, and Y. J. Yuan, “The Design of Transverse Emittance Measurement at HIRFL-CSR”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP109, pp. 272-274.
- K. Endo, K. Muto, S. Ninomiya, and M. Toda, “Non-Resonant RF Accelerating System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B02, pp. 1981-1983.
Back to search