JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Vogel et al., “Production of Nb/Cu Sputtered Superconducting Cavities for LHC”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP016, pp. 437-439. 
[n]	A. C. Bartnik and T. Kamps, “Summary of WG1 on Injectors - ERL 2015”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 103-106. doi:10.18429/JACoW-ERL2015-THPCTH075
[n]	K. Peetermans et al., “Courant-Snyder formalism for modeling, optimizing and simulating broadband THz radiation transport”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM031, unpublished. 
[n]	V. Ziemann, “Beam Optics for the Target Beam Lines of the European Spallation Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V022, pp. 1412-1414. 
[n]	R. Laouar, E. R. Colby, R. J. England, and R. J. Noble, “Measurement of Thermal Dependencies of PBG Fiber Properties”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP276, pp. 1343-1345. 
[n]	B. Steffen, F. M??ller, and V. Schlott, “A Compact Single Shot Electro-Optical Bunch Length Monitor for the SwissFEL”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB42, pp. 263-265. 
[n]	M. G. Billing et al., “Techniques for Observation of Beam Dynamics in the Presence of an Electron Cloud”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE091, pp. 1197-1199. 
[n]	M. Clift, B. W. Karnaghan, W. K. Lewis, A. C. Starritt, and R. I. Farnsworth, “Outsourcing, Insourcing, and Integration of Control Systems in the Australian Synchrotron”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAA02, pp. 276-280. 
[n]	H. T. Hou et al., “Prototypes Fabrication of 1.3 GHz Superconducting Rf Components for SHINE”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 164-167. doi:10.18429/JACoW-SRF2019-MOP049
[n]	K. S. Zhou, H. X. Deng, B. Liu, and D. Wang, “Numerical Simulations for Generating Fully Coherent Soft X-Ray Free Electron Lasers With Ultra-Short Wavelength”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 258-261. doi:10.18429/JACoW-FEL2019-TUP088
[n]	P. T?¬tu, “New Linac Three Phase Planes Pulsed Emitttance Measurement”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S5-9, pp. 309-313. 
[n]	D. Zangrando, S. Di Mitri, B. Diviacco, C. Knapic, and L. Tosi, “Commissioning of Two New Insertion Devices at ELETTRA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG017, pp. 1050-1052. 
[n]	A. Halavanau, et al., “Generation of Homogeneous and Patterned Electron Beams using a Microlens Array Laser-Shaping Technique”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. XX-XX. doi:10.18429/JACoW-IPAC2016-THPOW021
[n]	V. Ziemann, “Modeling and Tuning the Beam Lines of the Svedberg Laboratory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP117G, pp. 2480-2481. 
[n]	V. Kain et al., “The New Transfer Line Collimation System for the LHC High Luminosity Era”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 839-841. doi:10.18429/JACoW-IPAC2014-MOPRI096
[n]	J. L. Hirshfield, “Cyclotron Autoresonance Accelerator for Electron Beam Dry Scrubbing of Flue Gases”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P109, pp. 3863-3865. 
[n]	P. Bonnal et al., “openSE: a Systems Engineering Framework Particularly Suited to Particle Accelerator Studies and Development Projects”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2398-2401. doi:10.18429/JACoW-IPAC2016-WEPMR055
[n]	J.-L. Revol et al., “Operation of the ESRF-EBS light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 449-452. doi:10.18429/JACoW-IPAC2023-MOPA168
[n]	M. Kinsho, Z. Kabeya, N. Ogiwara, and Y. Saito, “Alumina Ceramics Vacuum Duct for the 3GeV-RCS of the J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE039, pp. 2604-2606. 
[n]	N. Kujala, J. Liu, J. Laksman, R. P. Gautam, W. Freund, and J. Grünert, “Evaluation of photon energy and bandwidth jitter of SASE-FEL beam using hard X-ray spectrometer at European XFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM128, unpublished. 
[n]	K. R. Samokhvalova, C. Chen, and J. Z. Zhou, “Warm-Fluid Equilibrium Theory of an Intense Charged-Particle Beam Propagating through a Periodic Solenodal Focusing Channel”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS028, pp. 3558-3560. 
[n]	F. L. Shang and L. Shang, “The Power Supply System for 10 MeV & 20 kW Industry Irradiation Facility”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3678-3680. doi:10.18429/JACoW-IPAC2021-WEPAB418
[n]	A. Saa Hernandez, P. J. Spiller, and U. Ratzinger, “Optimization of the Sextupole Scheme and Compensation of the Time-Dependent Field Errors during Slow Extraction from the Superconducting Synchrotron SIS300”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC059, pp. 2151-2153. 
[n]	C. Pagani, P. Pierini, and D. Barni, “TESLA Test Facility (TTF) Cryostat Design and Development”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C42, pp. 781-788. 
[n]	S. Horney et al., “Investigation of octupolar resonances in the LHC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM020, unpublished. 
[n]	N. A. Vinokurov, “Status of Novosibirsk ERL”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 5-7. doi:10.18429/JACoW-ERL2019-MOCOXBS03
[n]	F. Carlier et al., “Towards optics measurements with a new LEIR BPM system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1644-1647. doi:10.18429/JACoW-IPAC2023-TUPA150
[n]	F. Marhauser, E. Daly, and J. A. Fitzpatrick, “Cavity Procurement and Qualification Plan for LCLS-II”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB003, pp. 529-533. 
[n]	C. Sun, H. Nishimura, D. Robin, C. Steier, and W. Wan, “Dynamic Aperture Optimization using Genetic Algorithms”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUODN4, pp. 793-795. 
[n]	J. L. Hamel and G. Maitchard, “Beam Lines Controls System for SATURNE II”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1722-1725. 
[n]	T. Gatsi, X. P. Baloyi, J. L. Lekganyane, and R. L. Schwartz, “ELK Stack Deployment with Ansible”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1411-1414. doi:10.18429/JACoW-ICALEPCS2023-THPDP047
[n]	Y. Jung et al., “Low Temperature Heat Treatment on the HWR Cavity”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 779. doi:10.18429/JACoW-SRF2021-THPCAV002
[n]	E. Gianfelice-Wendt et al., “LHC Abort Gap Cleaning with the Transverse Damper”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP017, pp. 2519-2521. 
[n]	T. G. Jurgens, H. W. Miller, A. Moretti, and P. Zhou, “The Determination of the 805 MHz Side Couple Cavity Dimensions for the Fermilab Linac Upgrade”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO424, pp. 108-110. 
[n]	G. Sterbini, B. Dehning, S. S. Gilardoni, and A. Guerrero, “Beam-based Measurements of the CPS Wire Scanner Precision and Accuracy”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3674-3676. doi:10.18429/JACoW-IPAC2014-THPME173
[n]	M. A. Furman et al., “Self-consistent 3D Modeling of Electron Cloud Dynamics and Beam Response”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXAB03, pp. 764-768. 
[n]	H. Haseroth and P. T?¬tu, “Recent Operation and Modifications on the CPS-50 MeV Linac (Old Linac)”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB05, pp. 381-385. 
[n]	A. Hanuka, O. R. Convery, Y. Gal, and L. Smith, “Uncertainty Quantification for Virtual Diagnostic of Particle Accelerators”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper FRXC07, unpublished. 
[n]	A. Hershcovitch et al., “Versatile Device for In-situ Discharge Cleaning and Multiple Coatings of Long, Small Diameter Tubes”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA082, pp. 1509-1511. 
[n]	M. Jaussi et al., “A Digital System for Longitudinal Emittance Blow-Up in the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS024, pp. 215-218. 
[n]	S. Horney, P. Burrows, J. Dilly, E. Maclean, T. Persson, and R. Tomas, “Energy sensitivity of the High Luminosity LHC optics at the end of the Beta* squeeze”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM018, unpublished. 
[n]	S. Minohara et al., “Specific Beam Delivery System of Medical Accelerator HIMAC”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 192-194. doi:10.18429/JACoW-ICALEPCS1991-S04SRS10
[n]	J. Huguenin, R. Dubois, R. El-Bez, and G. Visconti, “The New 500 keV Single-Gap Pre-injector Tube for the CERN Proton Synchrotron Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VII-02, pp. 355-364. 
[n]	M. H. Bickley and K. S. White, “Control System Design Philosophy for Effective Operations and Maintenance”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDT003, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search