Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. C. Heisen et al., “Karabo: An Integrated Software Framework Combining Control, Data Management, and Scientific Computing Tasks”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB02, pp. 1465-1468.
[n] A. E. Vlieks et al., “100 MW Klystron Development at SLAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 798-801.
[n] J.-L. Vay, E. Cormier-Michel, W. M. Fawley, and C. G. R. Geddes, “Full Electromagnetic Simulation of Coherent Synchrotron Radiation via the Lorentz-Boosted Frame Approach”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC064, pp. 1874-1876.
[n] M. P. Howell et al., “The First ASME Code Stamped Cryomodule at SNS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC106, pp. 2465-2467.
[n] C. E. Mitchell and J. Qiang, “A Parallel Particle-Particle, Particle-Mesh Solver for Studying Coulomb Collisions in the Code IMPACT-T”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 593-595. doi:10.18429/JACoW-IPAC2015-MOPMA024
[n] E. Cormier-Michel et al., “Low Noise Particle-in-Cell Simulations of Laser Plasma Accelerator 10 GeV Stages”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper TUSBC2, pp. 78-80.
[n] E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
[n] J.-L. Vay et al., “Modeling of 10 GeV-1 TeV Laser-Plasma Accelerators Using Lorentz Boosted Simulations”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEEPPB003, pp. 2172-2172.
[n] R. Tighe, “RF Feedback Simulation for the PEP-II B Facotry”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1957-1960.
[n] S. Lenci, H. Bohlen, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU485, pp. 515-517.
[n] Y. Li, H. P. Bohlen, R. N. Tornoe, and E. L. Wright, “IOTs: The Next Generation RF Power Sources for Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH168, pp. 0-3645.
[n] B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 237-241.
[n] K. Furukawa et al., “Beam Feedback System Challenges at SuperKEKB Injector Linac”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOBAB04, pp. 1497-1500.
[n] S. Lenci, E. Eisen, and B. Stockwell, “Development of An 805-MHz, 550 kW Pulsed Klystron for The Spallation Neutron Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU484, pp. 512-514.
[n] J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056.
[n] G. Manduchi, A. Luchetta, and C. Taliercio, “The New Multicore Real-time Control System of the RFX-mod Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOBAB03, pp. 1493-1496.
[n] M. Maggiore et al., “Design Study of Medical Cyclotron SCENT300”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-12, pp. 79-83.
[n] J.-L. Vay, E. Cormier-Michel, W. M. Fawley, C. G. R. Geddes, and D. P. Grote, “Application of the Reduction of Scale Range in a Lorentz Boosted Frame to the Numerical Simulation of Particle Acceleration Devices”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1PBI04, pp. 641-645.
[n] K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693.
[n] E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE029, pp. 1144-1146.
[n] C. Cocho et al., “JOGL Live Rendering Techniques in Data Acquisition Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB05, pp. 1477-1480.
[n] T. Satogata, S. Peggs, and S. Tepikian, “Interaction Region Quadrupole Roll and Solenoid Misalignment in RHIC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 985-988.
[n] P. Emma, T. Limberg, and R. Rossmanith, “Depolarization in the SLC Collider Arcs”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 941-944.
[n] N. Schwarz, F. De Carlo, A. Glowacki, J. P. Hammonds, F. Khan, and K. Yue, “Experiment Control and Analysis for High-Resolution Tomography”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB03, pp. 1469-1472.
[n] S. Werin, “Dynamic Aperture of the MAX II Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 953-956.
[n] G. Parzen, “Tune Modulation Due to Gradient Ripple and the Dynamic Aperture”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 959-962.
[n] J.-L. Vay, E. Cormier-Michel, W. M. Fawley, M. A. Furman, C. G. R. Geddes, and D. P. Grote, “Novel Methods for Simulating Relativistic Systems Using an Optimal Boosted Frame”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TU4IOPK02, pp. 73-76.
[n] A. V. Higuera and J. R. Cary, “Integrating the Lorentz Force Law for Highly-Relativistic Particle-in-Cell Simulations”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4734-4736. doi:10.18429/JACoW-IPAC2018-THPML042
[n] D. A. Rehn, C. A. Bauer, J. R. Cary, G. R. Werner, and C. D. Zhou, “Wake-field Reduction in Hybrid Photonic Crystal Accelerator Cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA068, pp. 1289-1291.
[n] C. G. R. Geddes et al., “Scaled Simulation Design of High Quality Laser Wakefield Accelerator Stages”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP075, pp. 2970-2972.
[n] E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
[n] B. M. Cowan et al., “Laser Wakefield Simulation Using a Speed-of-Light Frame Envelope Model”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP018, pp. 4569-4569.
[n] J. C. Hovater, “Performance of SRF Systems in Large Scale Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93C02, pp. XX-XX.
[n] W. R. Fowkes et al., “1.2 MW Klystron for Asymmetric Storage Ring B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAE07, pp. 1497-1499.
[n] J. Haimson, B. Mecklenburg, G. Stowell, and E. L. Wright, “A Fully Demountable 550 kV Electron Gun for Low Emittance Beam Experiments with a 17 GHz Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W029, pp. 2808-2810.
[n] W. R. Fowkes, R. S. Callin, S. G. Tantawi, and E. L. Wright, “Reduced Field TE01 X-Band Traveling Wave Window”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ28, pp. 1587-1589.
For LaTeX
Use Complete Form
For BibTeX
References
- B. C. Heisen et al., “Karabo: An Integrated Software Framework Combining Control, Data Management, and Scientific Computing Tasks”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB02, pp. 1465-1468.
- A. E. Vlieks et al., “100 MW Klystron Development at SLAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 798-801.
- J.-L. Vay, E. Cormier-Michel, W. M. Fawley, and C. G. R. Geddes, “Full Electromagnetic Simulation of Coherent Synchrotron Radiation via the Lorentz-Boosted Frame Approach”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC064, pp. 1874-1876.
- M. P. Howell et al., “The First ASME Code Stamped Cryomodule at SNS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC106, pp. 2465-2467.
- C. E. Mitchell and J. Qiang, “A Parallel Particle-Particle, Particle-Mesh Solver for Studying Coulomb Collisions in the Code IMPACT-T”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 593-595.
- E. Cormier-Michel et al., “Low Noise Particle-in-Cell Simulations of Laser Plasma Accelerator 10 GeV Stages”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper TUSBC2, pp. 78-80.
- E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
- J.-L. Vay et al., “Modeling of 10 GeV-1 TeV Laser-Plasma Accelerators Using Lorentz Boosted Simulations”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEEPPB003, pp. 2172-2172.
- R. Tighe, “RF Feedback Simulation for the PEP-II B Facotry”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1957-1960.
- S. Lenci, H. Bohlen, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU485, pp. 515-517.
- Y. Li, H. P. Bohlen, R. N. Tornoe, and E. L. Wright, “IOTs: The Next Generation RF Power Sources for Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH168, pp. 0-3645.
- B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 237-241.
- K. Furukawa et al., “Beam Feedback System Challenges at SuperKEKB Injector Linac”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOBAB04, pp. 1497-1500.
- S. Lenci, E. Eisen, and B. Stockwell, “Development of An 805-MHz, 550 kW Pulsed Klystron for The Spallation Neutron Source”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU484, pp. 512-514.
- J. J. Petillo et al., “The MICHELLE Electron Gun and Collector Modeling Tool”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH090, pp. 3054-3056.
- G. Manduchi, A. Luchetta, and C. Taliercio, “The New Multicore Real-time Control System of the RFX-mod Experiment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOBAB03, pp. 1493-1496.
- M. Maggiore et al., “Design Study of Medical Cyclotron SCENT300”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-12, pp. 79-83.
- J.-L. Vay, E. Cormier-Michel, W. M. Fawley, C. G. R. Geddes, and D. P. Grote, “Application of the Reduction of Scale Range in a Lorentz Boosted Frame to the Numerical Simulation of Particle Acceleration Devices”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU1PBI04, pp. 641-645.
- K. Eppley et al., “Operation of a 1.3 GHz, 10 MW Multiple Beam Klystron”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP39, pp. 693-693.
- E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE029, pp. 1144-1146.
- C. Cocho et al., “JOGL Live Rendering Techniques in Data Acquisition Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB05, pp. 1477-1480.
- T. Satogata, S. Peggs, and S. Tepikian, “Interaction Region Quadrupole Roll and Solenoid Misalignment in RHIC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 985-988.
- P. Emma, T. Limberg, and R. Rossmanith, “Depolarization in the SLC Collider Arcs”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 941-944.
- N. Schwarz, F. De Carlo, A. Glowacki, J. P. Hammonds, F. Khan, and K. Yue, “Experiment Control and Analysis for High-Resolution Tomography”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB03, pp. 1469-1472.
- S. Werin, “Dynamic Aperture of the MAX II Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 953-956.
- G. Parzen, “Tune Modulation Due to Gradient Ripple and the Dynamic Aperture”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 959-962.
- J.-L. Vay, E. Cormier-Michel, W. M. Fawley, M. A. Furman, C. G. R. Geddes, and D. P. Grote, “Novel Methods for Simulating Relativistic Systems Using an Optimal Boosted Frame”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper TU4IOPK02, pp. 73-76.
- A. V. Higuera and J. R. Cary, “Integrating the Lorentz Force Law for Highly-Relativistic Particle-in-Cell Simulations”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4734-4736.
- D. A. Rehn, C. A. Bauer, J. R. Cary, G. R. Werner, and C. D. Zhou, “Wake-field Reduction in Hybrid Photonic Crystal Accelerator Cavities”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA068, pp. 1289-1291.
- C. G. R. Geddes et al., “Scaled Simulation Design of High Quality Laser Wakefield Accelerator Stages”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP075, pp. 2970-2972.
- E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
- B. M. Cowan et al., “Laser Wakefield Simulation Using a Speed-of-Light Frame Envelope Model”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP018, pp. 4569-4569.
- J. C. Hovater, “Performance of SRF Systems in Large Scale Applications”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93C02, pp. XX-XX.
- W. R. Fowkes et al., “1.2 MW Klystron for Asymmetric Storage Ring B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAE07, pp. 1497-1499.
- J. Haimson, B. Mecklenburg, G. Stowell, and E. L. Wright, “A Fully Demountable 550 kV Electron Gun for Low Emittance Beam Experiments with a 17 GHz Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W029, pp. 2808-2810.
- W. R. Fowkes, R. S. Callin, S. G. Tantawi, and E. L. Wright, “Reduced Field TE01 X-Band Traveling Wave Window”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ28, pp. 1587-1589.
Back to search