Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Baron et al., “Experience with High Intensity Operation of the GANIL Facility”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper E-04, pp. 385-388.
[n] M. Hager and M. Regodic, “A Modular Software Architecture for Applications that Support Accelerator Commissioning at MedAustron”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 938-941. doi:10.18429/JACoW-ICALEPCS2015-WEPGF101
[n] N. F. Ziegler, “Coaxial Cavities for Separated Orbit Cyclotrons”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 331-336.
[n] C. A. Ludemann et al., “ORIC Stripping Foil Positioner for Tandem Beam Injection”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper DP-09, pp. 303-305.
[n] G. S. McNeilly et al., “Design Study for the Conversion of the Oak Ridge Isochronous Cyclotron from an Energy Constant of K=90 to K=300 MeV”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-11, pp. 626-629.
[n] B. Militsyn, “Injection System of 4GLS Light Source”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 21, pp. 15-18.
[n] J. Ferm?®, F. Ripouteau, J. L. Belmont, G. Laborie, and G. Goin, “Grenoble Cycloton Progress Report”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A18, pp. XX-XX.
[n] T. P. Cleary, “Implementation of the ORIC Magnetic Field Measurements”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3907-3910.
[n] W. J. Schneider and D. Edwards, “Trace Impurity Analyzer”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4091-4093.
[n] D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS029, pp. 2400-2402.
[n] R. Dash, K. C. Mittal, J. Mondal, and A. S. Sharma, “Beam Dynamics Studies of a 30 MeV Standing Wave Electron Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC02, pp. 451-453.
[n] W. B. Mori, J. S. Wurtele, T. Katsouleas, G. Shvets, T. C. Chiou, and C. Decker, “Recent Work on Short Pulse Laser-Plasma Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2635-2638.
[n] M. A. Fraser et al., “Feasibility of Slow-Extracted High-Energy Ions From the CERN Proton Synchrotron for CHARM”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1703-1706. doi:10.18429/JACoW-IPAC2022-WEPOST012
[n] N. F. Ziegler, “Test Results from Coaxial Cavities for Separted-Orbit Cyclotrons”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 482-487.
[n] D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2775-2778. doi:10.18429/JACoW-IPAC2024-WEPS38
[n] A. I. Warwick, T. J. Fessenden, D. Keefe, C. H. Kim, and H. Meuth, “Performance of MBE-4, An Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 118-121.
[n] D. K. Olsen et al., “The HISTRAP Proposal: Heavy Ion Storage Ring for Atomic Physics”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper C-04, pp. 134-140.
[n] M. Lieuvin, J. L. Belmont, and M. Bajard, “Preliminary Tests for the Axial Injection of Heavy Ions at the Grenoble Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-08, pp. 614-617.
[n] D. Bloess et al., “Superconducting, Hydroformed, Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2057-2060.
[n] R. Hajima and H. Owen, “ERL07 Working Group 2 Summary: Optics and Beam Transport”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 2, pp. 145-152.
[n] C. Boehme, B. Cheymol, I. Dolenc Kittelmann, H. Hassanzadegan, and A. Jansson, “Beam Instrumentation in the ESS Cold Linac”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC06, pp. 667-669.
[n] H. M. Butler, C. B. Fulmer, S. W. Mosko, and W. F. Ohnesorge, “Fast Neutron Dose Equivalent Rates in Heavy Ion Target Areas”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-24, pp. 2216-2218.
[n] J. Butler et al., “Precision Synchrotron Radiation Detectors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1544-1547.
[n] K. Chan et al., “Superconducting High-Intensity RF Proton Accelerator for Transmutation Technologies”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F16, pp. 623-627.
[n] F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
[n] M. Minestrini, “Preliminary Results on Niobium Sputtered Films inside Tesla Type Cavities”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP24, pp. 110-112.
[n] F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
[n] F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295.
[n] V. A. Moiseev et al., “Reconstruction of the Beam Parameters and Structure Characteristics for INR Isotope Channel”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB013, pp. 196-198.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Baron et al., “Experience with High Intensity Operation of the GANIL Facility”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper E-04, pp. 385-388.
- M. Hager and M. Regodic, “A Modular Software Architecture for Applications that Support Accelerator Commissioning at MedAustron”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 938-941.
- N. F. Ziegler, “Coaxial Cavities for Separated Orbit Cyclotrons”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 331-336.
- C. A. Ludemann et al., “ORIC Stripping Foil Positioner for Tandem Beam Injection”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper DP-09, pp. 303-305.
- G. S. McNeilly et al., “Design Study for the Conversion of the Oak Ridge Isochronous Cyclotron from an Energy Constant of K=90 to K=300 MeV”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-11, pp. 626-629.
- B. Militsyn, “Injection System of 4GLS Light Source”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 21, pp. 15-18.
- J. Ferm?®, F. Ripouteau, J. L. Belmont, G. Laborie, and G. Goin, “Grenoble Cycloton Progress Report”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A18, pp. XX-XX.
- T. P. Cleary, “Implementation of the ORIC Magnetic Field Measurements”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3907-3910.
- W. J. Schneider and D. Edwards, “Trace Impurity Analyzer”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4091-4093.
- D. Rees et al., “LANSCE RF System Refurbishment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS029, pp. 2400-2402.
- R. Dash, K. C. Mittal, J. Mondal, and A. S. Sharma, “Beam Dynamics Studies of a 30 MeV Standing Wave Electron Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC02, pp. 451-453.
- W. B. Mori, J. S. Wurtele, T. Katsouleas, G. Shvets, T. C. Chiou, and C. Decker, “Recent Work on Short Pulse Laser-Plasma Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2635-2638.
- M. A. Fraser et al., “Feasibility of Slow-Extracted High-Energy Ions From the CERN Proton Synchrotron for CHARM”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1703-1706.
- N. F. Ziegler, “Test Results from Coaxial Cavities for Separted-Orbit Cyclotrons”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 482-487.
- D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS38, pp. 2775-2778.
- A. I. Warwick, T. J. Fessenden, D. Keefe, C. H. Kim, and H. Meuth, “Performance of MBE-4, An Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 118-121.
- D. K. Olsen et al., “The HISTRAP Proposal: Heavy Ion Storage Ring for Atomic Physics”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper C-04, pp. 134-140.
- M. Lieuvin, J. L. Belmont, and M. Bajard, “Preliminary Tests for the Axial Injection of Heavy Ions at the Grenoble Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-08, pp. 614-617.
- D. Bloess et al., “Superconducting, Hydroformed, Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2057-2060.
- R. Hajima and H. Owen, “ERL07 Working Group 2 Summary: Optics and Beam Transport”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 2, pp. 145-152.
- C. Boehme, B. Cheymol, I. Dolenc Kittelmann, H. Hassanzadegan, and A. Jansson, “Beam Instrumentation in the ESS Cold Linac”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC06, pp. 667-669.
- H. M. Butler, C. B. Fulmer, S. W. Mosko, and W. F. Ohnesorge, “Fast Neutron Dose Equivalent Rates in Heavy Ion Target Areas”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-24, pp. 2216-2218.
- J. Butler et al., “Precision Synchrotron Radiation Detectors”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1544-1547.
- K. Chan et al., “Superconducting High-Intensity RF Proton Accelerator for Transmutation Technologies”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F16, pp. 623-627.
- F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
- M. Minestrini, “Preliminary Results on Niobium Sputtered Films inside Tesla Type Cavities”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP24, pp. 110-112.
- F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
- F. Tazzioli et al., “Initial Commissioning of the LISA Superconducting Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-01, pp. 293-295.
- V. A. Moiseev et al., “Reconstruction of the Beam Parameters and Structure Characteristics for INR Isotope Channel”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB013, pp. 196-198.
Back to search