Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Giovannozzi, “DESIGN AND TESTS OF A LOW-LOSS MULTI-TURN EJECTION FOR THE CERN PS”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAZ03, pp. 192-196.
[n] E. Allaria, G. De Ninno, and W. M. Fawley, “The Second Stage of FERMI@Elettra: A Seeded FEL in the Soft X-ray Spectral Range”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC53, pp. 631-634.
[n] H. Kim, “Regenerative Beam Extraction”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-002, pp. XX-XX.
[n] H. Wu et al., “Control System Integration of the PETRA III BPM System based on Libera Brilliance”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP073, pp. 543-545.
[n] J. A. Casey, F. O. Arntz, M. P. J. Gaudreau, M. K. Kempkes, and I. Roth, “Marx Bank Technology for Accelerators and Colliders”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD008, pp. 1449-1451.
[n] L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX.
[n] S. Veseli, “PvaPy: Python API for EPICS PV Access”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 970-973. doi:10.18429/JACoW-ICALEPCS2015-WEPGF116
[n] O. Napoly, “Highlights from the TESLA Technical Design Proposal”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPA007, pp. 402-406.
[n] R. Wegner, W. Wuensch, G. Burt, and B. J. Woolley, “Bead-Pull Measurement Method and Tuning of a Prototype CLIC Crab Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP035, pp. 134-136.
[n] R. Brinkmann, “Technology and Challenges of Linear Colliders”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOBC2, pp. 16-20.
[n] F. Sannibale, D. Baum, K. Holldack, N. Kelez, and T. Scarvie, “A Second Beam-Diagnostic Beamline for the Advanced Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB051, pp. 2527-2529.
[n] R. Brinkmann, “Linear Collider Projects at DESY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOZ01A, pp. 53-57.
[n] Y. Luo, W. Fischer, N. Malitsky, S. Tepikian, and D. Trbojevic, “Online Nonlinear Chromaticity Correction Using Off-Momentum Tune Response Matrix”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS110, pp. 4357-4359.
[n] A. P. Shishlo, “Model and Beam Based Setup Procedures for a High Power Hadron Superconducting Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC03, pp. 41-45.
[n] B. Keil et al., “Design Status of the European X-FEL Tranverse Intra Bunch Train Feedback”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA35, pp. 133-137.
[n] W. Decking and H. Nishimura, “Interactive and Programmable Environment for Accelerator Modeling And Simulation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP22C, pp. 1224-1226.
[n] T. Shintake, “C-Band Main Linac RF System for e+e- Linear Collider of 0.5 to 1.0 TeV C.M. Energy”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP50, pp. 184-186.
[n] A. Novokhatski and S. Weathersby, “RF Modes in the PEP-II Shielded Vertex Bellows”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG044, pp. 2981-2983.
[n] W. Wittmer, A. S. Fisher, D. J. Martin, and J. J. Sebek, “Detection of Instumental Drifts in the PEP II LER BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS084, pp. 4261-4263.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Giovannozzi, “DESIGN AND TESTS OF A LOW-LOSS MULTI-TURN EJECTION FOR THE CERN PS”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAZ03, pp. 192-196.
- E. Allaria, G. De Ninno, and W. M. Fawley, “The Second Stage of FERMI@Elettra: A Seeded FEL in the Soft X-ray Spectral Range”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC53, pp. 631-634.
- H. Kim, “Regenerative Beam Extraction”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-002, pp. XX-XX.
- H. Wu et al., “Control System Integration of the PETRA III BPM System based on Libera Brilliance”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP073, pp. 543-545.
- J. A. Casey, F. O. Arntz, M. P. J. Gaudreau, M. K. Kempkes, and I. Roth, “Marx Bank Technology for Accelerators and Colliders”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD008, pp. 1449-1451.
- L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX.
- S. Veseli, “PvaPy: Python API for EPICS PV Access”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 970-973.
- O. Napoly, “Highlights from the TESLA Technical Design Proposal”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPA007, pp. 402-406.
- R. Wegner, W. Wuensch, G. Burt, and B. J. Woolley, “Bead-Pull Measurement Method and Tuning of a Prototype CLIC Crab Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP035, pp. 134-136.
- R. Brinkmann, “Technology and Challenges of Linear Colliders”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOBC2, pp. 16-20.
- F. Sannibale, D. Baum, K. Holldack, N. Kelez, and T. Scarvie, “A Second Beam-Diagnostic Beamline for the Advanced Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB051, pp. 2527-2529.
- R. Brinkmann, “Linear Collider Projects at DESY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOZ01A, pp. 53-57.
- Y. Luo, W. Fischer, N. Malitsky, S. Tepikian, and D. Trbojevic, “Online Nonlinear Chromaticity Correction Using Off-Momentum Tune Response Matrix”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS110, pp. 4357-4359.
- A. P. Shishlo, “Model and Beam Based Setup Procedures for a High Power Hadron Superconducting Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC03, pp. 41-45.
- B. Keil et al., “Design Status of the European X-FEL Tranverse Intra Bunch Train Feedback”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA35, pp. 133-137.
- W. Decking and H. Nishimura, “Interactive and Programmable Environment for Accelerator Modeling And Simulation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP22C, pp. 1224-1226.
- T. Shintake, “C-Band Main Linac RF System for e+e- Linear Collider of 0.5 to 1.0 TeV C.M. Energy”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP50, pp. 184-186.
- A. Novokhatski and S. Weathersby, “RF Modes in the PEP-II Shielded Vertex Bellows”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG044, pp. 2981-2983.
- W. Wittmer, A. S. Fisher, D. J. Martin, and J. J. Sebek, “Detection of Instumental Drifts in the PEP II LER BPM System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS084, pp. 4261-4263.
Back to search