Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Ashkenazi, J. A. Fugitt, J. C. Hovater, G. E. Lahti, K. L. Mahoney, and S. N. Simrock, “Calibration and Operation Schemes for CEBAF RF Control”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU462, pp. 480-483.
[n] A. Sato et al., “Six-sector FFAG Ring to Demonstrate Bunch Rotation for PRISM”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP007, pp. 3389-3391.
[n] S. Shen et al., “Design and Analysis of Vacuum Pumping Systems for Spallation Neutron Source Drift-Tube Linac and Coupled-Cavity Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH048, pp. 2198-2200.
[n] G. A. Amatuni, Y. L. Martirosyan, R. H. Mikaelyan, V. M. Tsakanov, and A. Vardanyan, “Beam Orbit Diagnostics and Control in CANDLE Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP019, pp. 1655-1657.
[n] B. Dwersteg, G. Weichert, and N. Adelt, “TESLA Main Coupler Development at DESY”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J02, pp. XX-XX.
[n] B. E. Schultz, F. Ames, O. K. Kester, P. Kunz, A. Mj?©s, and J. F. Sandor, “FEBIAD Ion Source Development at TRIUMF-ISAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4730-4733. doi:10.18429/JACoW-IPAC2018-THPML041
[n] M. Cavenago, V. Antoni, T. Kulevoy, S. Petrenko, G. Serianni, and P. Veltri, “NIO1 a Versatile Negative Ion Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC053, pp. 4176-4178.
[n] J. D. Doss, “Fault Protection Circuitry for the LASL 201.25 MHz Power Amplifiers”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper B-6, pp. 101-107.
[n] K. Papke and A. Grudiev, “Design of a RF Quadrupole Resonator for Landau Damping in HL-LHC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 51-55. doi:10.18429/JACoW-SRF2017-MOPB004
[n] R. Pitthan, B. Bell, H. Friedsam, W. Oren, M. Pietryka, and R. Ruland, “Alignment of the Stanford Linear Collider Arcs-Concepts and Results”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1402-1405.
[n] F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409.
[n] R. A. Margraf, X. J. Deng, Z. Huang, J. P. MacArthur, and G. Marcus, “Microbunch Rotation for Hard X-Ray Beam Multiplexing”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 665-668. doi:10.18429/JACoW-FEL2019-THP036
[n] J. D. Sherman, F. W. Guy, J. M. Potter, W. J. Starling, D. A. Swenson, and C. A. Willis, “A 25-keV, 30-milliamp Hydrogen-ion Injector for a 200-MHz, 750-keV Radio Frequency Quadrupole (RFQ)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS081, pp. 1838-1840.
[n] S. Okuda, T. Kojima, and R. Taniguchi, “Characteristics of the Electron Linac Based Coherent Radiation Light Source at OPU”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA033, pp. 139-141.
[n] E. N. Schmierer et al., “Results of the APT RF Power Coupler Development for Superconducting Linacs”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT012, pp. XX-XX.
[n] A. Chertovskikh, “VME Controller Based on PowerPC 440GX Embedded Processor for Using in KSTAR Data Acquisition and Control System.”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP560, pp. XX-XX.
[n] W. B. Ingalls et al., “Enhanced H$$ Ion Source Testing Capabilities at LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4053, pp. 887-889.
[n] J. C. Sheppard, R. H. Helm, M. J. Lee, and M. D. Woodley, “On-Line Control Models for the Stanford Linear Collider”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2320-2323.
[n] T. Hardek, W. Kells, and H. Lai, “Very Low Intensity Storage-Ring Profile Monitor”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2219-2222.
[n] K. Sasa et al., “Construction of the 6 MV Tandem Accelerator System for Various Ion Beam Applications at the University of Tsukuba”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper THM2C02, pp. 285-287.
[n] E. Y. Wildner and N. Emelianenko, “Processing Magnet Geometry Measurements for Better Control of LHC Aperture”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN087, pp. 362-364.
[n] T. Morishita, K. Hasegawa, Y. Kondo, H. Kawamata, F. Naito, and T. Sugimura, “Progress on RFQIII Fabrication in J-PARC Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB042, pp. 570-572.
[n] D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Fabrication of Normalconducting Cavities for Accelerator Application”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 922-925.
[n] D. Melkumyan et al., “The State Machine Based Automatic Conditioning Application for PITZ”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 88-91. doi:10.18429/JACoW-PCaPAC2018-WEP24
[n] E. Carlier et al., “A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B04, pp. 2370-2372.
[n] A. Kulikov, J. Seeman, and M. Zolotorev, “The PEP-II High Power Beam Dumping System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPE14, pp. 2032-2033.
[n] S. G. Tantawi et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P058, pp. 3192-3194.
[n] J. Shi, H. Chen, D. Li, C.-X. Tang, and S. Zheng, “Experiment on a Cold Test Model of a 2-Cell SC Deflecting Cavity for ALS at LBNL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN054, pp. 3348-3350.
[n] T. Honda et al., “Straight-Sections Upgrade Project of the Photon Factory Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14014, pp. XX-XX.
[n] R. F. Koontz, J. Eichner, and S. Gold, “Recent Performance of Klystron Testing Modulators in the SLAC Klystron Test Lab”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-33, pp. 445-447.
[n] K. Satou, H. Harada, N. Hayashi, S. Lee, T. Toyama, and A. Ueno, “IPM Systems for J-PARC RCS and MR”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1C05, pp. 506-510.
[n] M. Hu et al., “Uniform Longitudinal Beam Profiles in the Fermilab Recycler Using Adaptive RF Correction”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS011, pp. 458-460.
[n] N. Angert, L. Dahl, J. Glatz, J. Klabunde, M. Mueller, and B. Wolf, “UNILAC Modifications for an Improved Synchrotron Injector Performance”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 503-506.
[n] V. Chohan, “Data Requirements and Handshake for the CERN Antiproton Transfer Operations from the AA and PS to Client Machines”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2035-2038.
[n] K. Johnson and A. M. Koehler, “Clinical Experience with the 160 MeV Proton Beam and Some Implications for Designers”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-08, pp. 2253-2256.
[n] H. S. Kim et al., “PLC Control System for Vacuum and 20 Kw RF Amplifier”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 215-217. doi:10.18429/JACoW-Cyclotrons2016-TUP22
[n] A.-M. Bachmann and P. Muggli, “Beam Diagnostics in the Advanced Plasma Wakefield Experiment AWAKE”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 1-6. doi:10.18429/JACoW-IBIC2020-MOAO01
[n] P. Bosland et al., “Tests at High RF Power of the ESS Medium Beta Cryomodule Demonstrator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1940-1943. doi:10.18429/JACoW-IPAC2019-TUPTS006
[n] K. H. MeB, “Quench Protection at HERA”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1474-1477.
[n] J. Dwivedi et al., “Restoration of RF Cavity for Synchrotron Storage Ring INDUS-1”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16003B, pp. XX-XX.
[n] C. J. Herrlander, K.-G. Rensfelt, and J. Starker, “CRYRING - A Heavy-Ion Storage and Synchrotron Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 350-353.
[n] H. Ao et al., “High Power Conditioning of Annular-Ring Coupled Structures for the J-PARC Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP089, pp. 1053-1055.
[n] D. L. Borovina, J. M. Gahl, and D. Rees, “Spectral Analysis of Breakdown at or Near RF Windows”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP54, pp. 786-788.
[n] H. Kaji et al., “Beam Gate Control System for SuperKEKB”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2124-2127. doi:10.18429/JACoW-IPAC2018-WEPAK015
[n] C. Joshi et al., “Test of the Electron Hose Instability in the E157 Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH141, pp. 4002-4004.
[n] J. M. Mosthaf, T. Fleck, S. Hanke, A. Peters, S. Scheloske, and S. Vollmer, “Overview of the Communication Structure of the HIT Accelerator Control System”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP002, pp. 168-170.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Ashkenazi, J. A. Fugitt, J. C. Hovater, G. E. Lahti, K. L. Mahoney, and S. N. Simrock, “Calibration and Operation Schemes for CEBAF RF Control”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU462, pp. 480-483.
- A. Sato et al., “Six-sector FFAG Ring to Demonstrate Bunch Rotation for PRISM”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP007, pp. 3389-3391.
- S. Shen et al., “Design and Analysis of Vacuum Pumping Systems for Spallation Neutron Source Drift-Tube Linac and Coupled-Cavity Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH048, pp. 2198-2200.
- G. A. Amatuni, Y. L. Martirosyan, R. H. Mikaelyan, V. M. Tsakanov, and A. Vardanyan, “Beam Orbit Diagnostics and Control in CANDLE Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP019, pp. 1655-1657.
- B. Dwersteg, G. Weichert, and N. Adelt, “TESLA Main Coupler Development at DESY”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93J02, pp. XX-XX.
- B. E. Schultz, F. Ames, O. K. Kester, P. Kunz, A. Mj?©s, and J. F. Sandor, “FEBIAD Ion Source Development at TRIUMF-ISAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4730-4733.
- M. Cavenago, V. Antoni, T. Kulevoy, S. Petrenko, G. Serianni, and P. Veltri, “NIO1 a Versatile Negative Ion Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC053, pp. 4176-4178.
- J. D. Doss, “Fault Protection Circuitry for the LASL 201.25 MHz Power Amplifiers”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper B-6, pp. 101-107.
- K. Papke and A. Grudiev, “Design of a RF Quadrupole Resonator for Landau Damping in HL-LHC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 51-55.
- R. Pitthan, B. Bell, H. Friedsam, W. Oren, M. Pietryka, and R. Ruland, “Alignment of the Stanford Linear Collider Arcs-Concepts and Results”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1402-1405.
- F. Senee, B. Pottin, G. Adroit, R. Gobin, O. Tuske, and A. Olivier, “Beam Species Fraction Measurement using Doppler Shift Method with FUJIKURA Fiberscope for IFMIF-EVEDA Injector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD46, pp. 407-409.
- R. A. Margraf, X. J. Deng, Z. Huang, J. P. MacArthur, and G. Marcus, “Microbunch Rotation for Hard X-Ray Beam Multiplexing”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 665-668.
- J. D. Sherman, F. W. Guy, J. M. Potter, W. J. Starling, D. A. Swenson, and C. A. Willis, “A 25-keV, 30-milliamp Hydrogen-ion Injector for a 200-MHz, 750-keV Radio Frequency Quadrupole (RFQ)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS081, pp. 1838-1840.
- S. Okuda, T. Kojima, and R. Taniguchi, “Characteristics of the Electron Linac Based Coherent Radiation Light Source at OPU”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA033, pp. 139-141.
- E. N. Schmierer et al., “Results of the APT RF Power Coupler Development for Superconducting Linacs”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT012, pp. XX-XX.
- A. Chertovskikh, “VME Controller Based on PowerPC 440GX Embedded Processor for Using in KSTAR Data Acquisition and Control System.”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP560, pp. XX-XX.
- W. B. Ingalls et al., “Enhanced H$$ Ion Source Testing Capabilities at LANSCE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4053, pp. 887-889.
- J. C. Sheppard, R. H. Helm, M. J. Lee, and M. D. Woodley, “On-Line Control Models for the Stanford Linear Collider”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2320-2323.
- T. Hardek, W. Kells, and H. Lai, “Very Low Intensity Storage-Ring Profile Monitor”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2219-2222.
- K. Sasa et al., “Construction of the 6 MV Tandem Accelerator System for Various Ion Beam Applications at the University of Tsukuba”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper THM2C02, pp. 285-287.
- E. Y. Wildner and N. Emelianenko, “Processing Magnet Geometry Measurements for Better Control of LHC Aperture”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN087, pp. 362-364.
- T. Morishita, K. Hasegawa, Y. Kondo, H. Kawamata, F. Naito, and T. Sugimura, “Progress on RFQIII Fabrication in J-PARC Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB042, pp. 570-572.
- D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Fabrication of Normalconducting Cavities for Accelerator Application”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 922-925.
- D. Melkumyan et al., “The State Machine Based Automatic Conditioning Application for PITZ”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 88-91.
- E. Carlier et al., “A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B04, pp. 2370-2372.
- A. Kulikov, J. Seeman, and M. Zolotorev, “The PEP-II High Power Beam Dumping System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPE14, pp. 2032-2033.
- S. G. Tantawi et al., “The Next Linear Collider Test Accelerator's RF Pulse Compression and Transmission Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P058, pp. 3192-3194.
- J. Shi, H. Chen, D. Li, C.-X. Tang, and S. Zheng, “Experiment on a Cold Test Model of a 2-Cell SC Deflecting Cavity for ALS at LBNL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN054, pp. 3348-3350.
- T. Honda et al., “Straight-Sections Upgrade Project of the Photon Factory Storage Ring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14014, pp. XX-XX.
- R. F. Koontz, J. Eichner, and S. Gold, “Recent Performance of Klystron Testing Modulators in the SLAC Klystron Test Lab”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-33, pp. 445-447.
- K. Satou, H. Harada, N. Hayashi, S. Lee, T. Toyama, and A. Ueno, “IPM Systems for J-PARC RCS and MR”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1C05, pp. 506-510.
- M. Hu et al., “Uniform Longitudinal Beam Profiles in the Fermilab Recycler Using Adaptive RF Correction”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS011, pp. 458-460.
- N. Angert, L. Dahl, J. Glatz, J. Klabunde, M. Mueller, and B. Wolf, “UNILAC Modifications for an Improved Synchrotron Injector Performance”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 503-506.
- V. Chohan, “Data Requirements and Handshake for the CERN Antiproton Transfer Operations from the AA and PS to Client Machines”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2035-2038.
- K. Johnson and A. M. Koehler, “Clinical Experience with the 160 MeV Proton Beam and Some Implications for Designers”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-08, pp. 2253-2256.
- H. S. Kim et al., “PLC Control System for Vacuum and 20 Kw RF Amplifier”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 215-217.
- A.-M. Bachmann and P. Muggli, “Beam Diagnostics in the Advanced Plasma Wakefield Experiment AWAKE”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 1-6.
- P. Bosland et al., “Tests at High RF Power of the ESS Medium Beta Cryomodule Demonstrator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1940-1943.
- K. H. MeB, “Quench Protection at HERA”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1474-1477.
- J. Dwivedi et al., “Restoration of RF Cavity for Synchrotron Storage Ring INDUS-1”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16003B, pp. XX-XX.
- C. J. Herrlander, K.-G. Rensfelt, and J. Starker, “CRYRING - A Heavy-Ion Storage and Synchrotron Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 350-353.
- H. Ao et al., “High Power Conditioning of Annular-Ring Coupled Structures for the J-PARC Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP089, pp. 1053-1055.
- D. L. Borovina, J. M. Gahl, and D. Rees, “Spectral Analysis of Breakdown at or Near RF Windows”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP54, pp. 786-788.
- H. Kaji et al., “Beam Gate Control System for SuperKEKB”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2124-2127.
- C. Joshi et al., “Test of the Electron Hose Instability in the E157 Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH141, pp. 4002-4004.
- J. M. Mosthaf, T. Fleck, S. Hanke, A. Peters, S. Scheloske, and S. Vollmer, “Overview of the Communication Structure of the HIT Accelerator Control System”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP002, pp. 168-170.
Back to search