Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. J. Clark, “Cyclotron Injection Systems (Invited paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 191-204.
[n] N. P. Di Monte, W. E. Norum, and C. Yao, “Commissioning of the FPGA-Based Transverse Feedback System at the Advanced Photon Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP059, pp. 218-220.
[n] X. C. Meng et al., “Study of Beam Break Up in Irradiation Linacs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3767-3769. doi:10.18429/JACoW-IPAC2017-THPAB031
[n] S. Singh, J. N. Karande, V. Nanal, R. G. Pillay, and P. Singh, “Control and Information System for BARC ÔÇô TIFR Superconducting LINAC Booster”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO05, pp. 62-64.
[n] D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX.
[n] D. J. Clark, “Conference Summary (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XIV-04, pp. 758-764.
[n] S. Krishnagopal and S. A. Samant, “Effect of mirror-tilt on the mode-structure in an oscillator FEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC085, pp. 3092-3094.
[n] F. W. Wang and Z. Li, “High Power Tests of the 2-Pin Waveguide Structures”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI083, pp. 2890-2892.
[n] R. Enparantza et al., “Beam Stop Design and Construction for the Front End Test Stand at ISIS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE049, pp. 1080-1082.
[n] T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 274-276. doi:10.18429/JACoW-IPAC2017-MOPAB069
[n] J.-F. Ostiguy and L. Michelotti, “Mxyzptlk: An Efficient, Native C++ Differentiation Engine”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN113, pp. 3489-3491.
[n] V. Nanal et al., “Extension of Superconducting LINAC Operation to Lighter Beams”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO06, pp. 65-67.
[n] J. Musson, K. E. Cole, and S. M. Rubin, “Application of Goubau Surface Wave Transmission Line for Improved Bench Testing of Diagnostic Beamline Elements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP047, pp. 4060-4062.
[n] M. H. Nasr and S. G. Tantawi, “New Geometrical-Optimization Approach using Splines for Enhanced Accelerator Cavities' Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4395-4397. doi:10.18429/JACoW-IPAC2018-THPMK049
[n] S. Krishnagopal and S. A. Samant, “Mode-Stability in FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPA05, pp. 219-221.
[n] W. Andreazza et al., “The Design, Construction and Operation of the Beam Instrumentation for the High Intensity and Energy Upgrade of ISOLDE at CERN”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 101-104. doi:10.18429/JACoW-IBIC2016-MOPG27
[n] M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
[n] D. J. Clark, E. Close, H. A. Grunder, H. Kim, P. Pellissier, and B. H. Smith, “Regenerative Beam Extraction for the Berkeley 88 - Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-006, pp. XX-XX.
[n] J. A. Hulbert et al., “Invited Paper: First Year's Operation of the Chalk River Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper A-01, pp. XX-XX.
[n] J.-F. Ostiguy and L. Michelotti, “CHEF: A Framework for Accelerator Optics and Simulation”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUAPMP02, pp. 153-156.
[n] Y. Nakanishi et al., “The Development of 16-Electrode Monitor for Measurement of the Multipole-Moment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 140-142. doi:10.18429/JACoW-IPAC2016-MOPMB025
[n] J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and R. X. Yuan, “The Evaluation of Beam Inclination Angle on the Cavity BPM Position Measurement”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 278-280. doi:10.18429/JACoW-IBIC2018-TUPB09
[n] T.-Y. Lee, M. G. Kim, C. D. Park, and E. S. Park, “Beam Lifetime of the Pohang Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH083, pp. 2650-2652.
[n] X. Fleury and J.-L. Lemaire, “Numerical Simulation of Space Charge Compensation in Intense Low Energy Proton Beams”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP26G, pp. 1300-1302.
[n] M. Larrañaga, R. Enparantza, and D. C. Plostinar, “Initial 2D Investigations into the Design and Parameters of an EM Quadrupole for FETS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC040, pp. 2097-2099.
For LaTeX
Use Complete Form
For BibTeX
References
- D. J. Clark, “Cyclotron Injection Systems (Invited paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 191-204.
- N. P. Di Monte, W. E. Norum, and C. Yao, “Commissioning of the FPGA-Based Transverse Feedback System at the Advanced Photon Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP059, pp. 218-220.
- X. C. Meng et al., “Study of Beam Break Up in Irradiation Linacs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3767-3769.
- S. Singh, J. N. Karande, V. Nanal, R. G. Pillay, and P. Singh, “Control and Information System for BARC ÔÇô TIFR Superconducting LINAC Booster”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO05, pp. 62-64.
- D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX.
- D. J. Clark, “Conference Summary (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XIV-04, pp. 758-764.
- S. Krishnagopal and S. A. Samant, “Effect of mirror-tilt on the mode-structure in an oscillator FEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC085, pp. 3092-3094.
- F. W. Wang and Z. Li, “High Power Tests of the 2-Pin Waveguide Structures”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI083, pp. 2890-2892.
- R. Enparantza et al., “Beam Stop Design and Construction for the Front End Test Stand at ISIS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE049, pp. 1080-1082.
- T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 274-276.
- J.-F. Ostiguy and L. Michelotti, “Mxyzptlk: An Efficient, Native C++ Differentiation Engine”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN113, pp. 3489-3491.
- V. Nanal et al., “Extension of Superconducting LINAC Operation to Lighter Beams”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO06, pp. 65-67.
- J. Musson, K. E. Cole, and S. M. Rubin, “Application of Goubau Surface Wave Transmission Line for Improved Bench Testing of Diagnostic Beamline Elements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP047, pp. 4060-4062.
- M. H. Nasr and S. G. Tantawi, “New Geometrical-Optimization Approach using Splines for Enhanced Accelerator Cavities' Performance”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4395-4397.
- S. Krishnagopal and S. A. Samant, “Mode-Stability in FEL Oscillators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPA05, pp. 219-221.
- W. Andreazza et al., “The Design, Construction and Operation of the Beam Instrumentation for the High Intensity and Energy Upgrade of ISOLDE at CERN”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 101-104.
- M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
- D. J. Clark, E. Close, H. A. Grunder, H. Kim, P. Pellissier, and B. H. Smith, “Regenerative Beam Extraction for the Berkeley 88 - Inch Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-006, pp. XX-XX.
- J. A. Hulbert et al., “Invited Paper: First Year's Operation of the Chalk River Superconducting Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper A-01, pp. XX-XX.
- J.-F. Ostiguy and L. Michelotti, “CHEF: A Framework for Accelerator Optics and Simulation”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUAPMP02, pp. 153-156.
- Y. Nakanishi et al., “The Development of 16-Electrode Monitor for Measurement of the Multipole-Moment”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 140-142.
- J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and R. X. Yuan, “The Evaluation of Beam Inclination Angle on the Cavity BPM Position Measurement”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 278-280.
- T.-Y. Lee, M. G. Kim, C. D. Park, and E. S. Park, “Beam Lifetime of the Pohang Light Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH083, pp. 2650-2652.
- X. Fleury and J.-L. Lemaire, “Numerical Simulation of Space Charge Compensation in Intense Low Energy Proton Beams”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP26G, pp. 1300-1302.
- M. Larrañaga, R. Enparantza, and D. C. Plostinar, “Initial 2D Investigations into the Design and Parameters of an EM Quadrupole for FETS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC040, pp. 2097-2099.
Back to search