Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. T. M. Chrin and G. Prekas, “A Taste of CAFE”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP078, pp. 821-823.
[n] M. Karlsson, B. Anderberg, and S. Rosander, “Study of a 10 MeV, 50 kW Racetrack Microtron for Industrial Radiation Processing”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1715-1718.
[n] F. M. Russell, “A Strong-Focusing Cyclotron with Separated Orbits”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H03, pp. XX-XX.
[n] C. F. Kellers and R. M. Littauer, “A Megawatt Solid-State Inverter to Power the Cornell 10 - GeV Electron Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 496-500.
[n] K. R. L. Baker, I. D. Finch, and M. Romanovschi, “Maintaining a Hybrid Control System at ISIS with a Vsystem/EPICS Bridge”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 986-992. doi:10.18429/JACoW-ICALEPCS2023-WE2BCO04
[n] W. K. Lau, M. C. Chou, J.-Y. Hwang, A. P. Lee, and N. Y. Huang, “Emission of Coherent T-rays from Trains of Ultrashort Electron Pulses in a Pulsed Helical Undulator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD58, pp. 507-510.
[n] J. Kasagi, S. Angius, and E. Kashy, “Beam Transport Calculation for K-500 Cyclotron Operation at Michigan State University”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2979-2982.
[n] S. Fu et al., “Developemnt of a 3.5MeV RFQ for ADS at IHEP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM203, pp. XX-XX.
[n] S. J. Oliveros, J. G. Acosta, L. M. Cremaldi, T. L. Hart, and D. J. Summers, “High Luminosity 100 TeV Proton-Antiproton Collider”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 45-48. doi:10.18429/JACoW-NAPAC2016-MOB3CO04
[n] K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
[n] J. P. Holzbauer et al., “Test Shipment of the PIP-II 650 MHz Transport Frame Between FNAL to STFC-UKRI”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 750-754. doi:10.18429/JACoW-SRF2023-WEPWB070
[n] S. M. H. Alsari, J. K. Pozimski, P. Savage, M. Dudman, and A. P. Letchford, “FETS RF System Design and Circulator Testing”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI067, pp. 2851-2853.
[n] X. Zhang et al., “Electron Cloud Studies at Tevatron and Main Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN117, pp. 3501-3503.
[n] N. Akaoka et al., “Development of Superconducting Single Cell Cavity for a Proton Linac in the Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP06G, pp. 734-736.
[n] L. H. J. Bozyk and P. J. Spiller, “Measurement of Beam Ioniziation Loss in SIS18”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 864-866. doi:10.18429/JACoW-IPAC2014-MOPRI104
[n] A. Malkin, N. S. Ginzburg, A. A. Golovanov, I. V. Zotova, and V. P. Tarakanov, “Using Lorentz Transformations for Simulations of Wiggler Superradiance from the Picosecond Electron Bunches”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP017, pp. 395-398.
[n] J. H. Martin, T. B. Novey, S. Suwa, and A. Yokosawa, “A New Scheme of Beam Extraction of the Argonne Zero Gradient Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 693-696.
[n] P. Plattner, F. Hug, R. Monroy-Villa, and T. Stengler, “Superconducting thin films for higher order mode antennas to increase the CW performance of SRF cavities at MESA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2760-2763. doi:10.18429/JACoW-IPAC2024-WEPS32
[n] W. S. Graves et al., “X-Ray Laser Seeding for Short Pulses and Narrow Bandwidth”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB066, pp. 959-961.
[n] A. P. Letchford et al., “The RAL Front End Test Stand”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH112, pp. 303-305.
[n] G. R. Henneberg, M. J. P. Adam, and G. R. Barkway, “Front End Photon Shutter Water Leak to Vacuum at the Canadian Light Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 60-62. doi:10.18429/JACoW-MEDSI2016-MOPE26
[n] Z. G. Zong et al., “Electro-polished Cavities Using China Ningxia Large Grain Niobium Material”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN047, pp. 2143-2145.
[n] R. Geithner et al., “A Cryogenic Current Comparator for FAIR with Improved Resolution”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF32, pp. 590-592.
[n] M. Tadokoro, J. Hirota, K. Hiramoto, and M. Nishi, “Resonant Beam Extraction with Constant Separatrix”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 309-312.
[n] J. Iversen et al., “Development and Design of a RF-Measurement Machine for the European XFEL Cavity Fabrication”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO071, pp. 786-790.
[n] X. Liu et al., “The Design of Control System for the Optical Cavity Adjuster of a FEL-THz Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA044, pp. 1232-1234.
[n] A. Arzumanov et al., “Production of Plutonium, Yttrium and Strontium Tracers for Using in Environmental Research”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-21, pp. XX-XX.
[n] E. Renner et al., “Design and Evaluation of FCC-hh Injection Protection Schemes”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 854-857. doi:10.18429/JACoW-IPAC2018-TUPAF059
[n] K. Saito et al., “Accelerator Development for Advanced Particle Beam Therapy”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP129, pp. 1827-1829.
[n] M. Tigner et al., “The Energy Recovery Linac (ERL) as a Driver for X-ray Producing Insertion Devices”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA005, pp. 230-232.
[n] P. Moreau et al., “Failure Mode And Recovery Strategies For The Operation Of The Tore Supra Tokamak”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP098, pp. 591-593.
[n] E. Weihreter et al., “Status of the Superconducting Compact Storage Ring Cosy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 237-240.
[n] A. Kanareykin, S. Kazakov, A. B. Kozyrev, E. Nenasheva, and V. P. Yakovlev, “Observation of an Anomalous Tuning Range of a Doped BST Ferroelectric Material Developed for Accelerator Applications”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB051, pp. 3987-3989.
[n] H. P. Chang, J. Chen, K. T. Hsu, C. C. Kuo, and Ch. Wang, “Modelling Modulation and Dynamic Tuning of Insertion Devices at SRRC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP116G, pp. 694-696.
[n] G. Pile, D. Bromberek, D. Horan, and A. Nassiri, “The Advanced Photon Source 352-MHz High-Power RF Test Stand”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH080, pp. 1396-1398.
[n] H. Chaloupka and H. Piel, “Non-Accelerator Applications of RF Superconductivity”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87C04, pp. XX-XX.
[n] J. C. Dooling, F. R. Brumwell, G. E. McMichael, M. E. Middendorf, and R. A. Zolecki, “Numerical Studies of a Second Harmonic RF Cavity for the IPNS RCS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP8, pp. 2274-2276.
For LaTeX
Use Complete Form
For BibTeX
References
- J. T. M. Chrin and G. Prekas, “A Taste of CAFE”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP078, pp. 821-823.
- M. Karlsson, B. Anderberg, and S. Rosander, “Study of a 10 MeV, 50 kW Racetrack Microtron for Industrial Radiation Processing”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1715-1718.
- F. M. Russell, “A Strong-Focusing Cyclotron with Separated Orbits”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H03, pp. XX-XX.
- C. F. Kellers and R. M. Littauer, “A Megawatt Solid-State Inverter to Power the Cornell 10 - GeV Electron Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 496-500.
- K. R. L. Baker, I. D. Finch, and M. Romanovschi, “Maintaining a Hybrid Control System at ISIS with a Vsystem/EPICS Bridge”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE2BCO04, pp. 986-992.
- W. K. Lau, M. C. Chou, J.-Y. Hwang, A. P. Lee, and N. Y. Huang, “Emission of Coherent T-rays from Trains of Ultrashort Electron Pulses in a Pulsed Helical Undulator”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD58, pp. 507-510.
- J. Kasagi, S. Angius, and E. Kashy, “Beam Transport Calculation for K-500 Cyclotron Operation at Michigan State University”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2979-2982.
- S. Fu et al., “Developemnt of a 3.5MeV RFQ for ADS at IHEP”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM203, pp. XX-XX.
- S. J. Oliveros, J. G. Acosta, L. M. Cremaldi, T. L. Hart, and D. J. Summers, “High Luminosity 100 TeV Proton-Antiproton Collider”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 45-48.
- K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
- J. P. Holzbauer et al., “Test Shipment of the PIP-II 650 MHz Transport Frame Between FNAL to STFC-UKRI”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB070, pp. 750-754.
- S. M. H. Alsari, J. K. Pozimski, P. Savage, M. Dudman, and A. P. Letchford, “FETS RF System Design and Circulator Testing”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI067, pp. 2851-2853.
- X. Zhang et al., “Electron Cloud Studies at Tevatron and Main Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN117, pp. 3501-3503.
- N. Akaoka et al., “Development of Superconducting Single Cell Cavity for a Proton Linac in the Neutron Science Project at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP06G, pp. 734-736.
- L. H. J. Bozyk and P. J. Spiller, “Measurement of Beam Ioniziation Loss in SIS18”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 864-866.
- A. Malkin, N. S. Ginzburg, A. A. Golovanov, I. V. Zotova, and V. P. Tarakanov, “Using Lorentz Transformations for Simulations of Wiggler Superradiance from the Picosecond Electron Bunches”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP017, pp. 395-398.
- J. H. Martin, T. B. Novey, S. Suwa, and A. Yokosawa, “A New Scheme of Beam Extraction of the Argonne Zero Gradient Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 693-696.
- P. Plattner, F. Hug, R. Monroy-Villa, and T. Stengler, “Superconducting thin films for higher order mode antennas to increase the CW performance of SRF cavities at MESA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS32, pp. 2760-2763.
- W. S. Graves et al., “X-Ray Laser Seeding for Short Pulses and Narrow Bandwidth”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB066, pp. 959-961.
- A. P. Letchford et al., “The RAL Front End Test Stand”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH112, pp. 303-305.
- G. R. Henneberg, M. J. P. Adam, and G. R. Barkway, “Front End Photon Shutter Water Leak to Vacuum at the Canadian Light Source”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 60-62.
- Z. G. Zong et al., “Electro-polished Cavities Using China Ningxia Large Grain Niobium Material”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN047, pp. 2143-2145.
- R. Geithner et al., “A Cryogenic Current Comparator for FAIR with Improved Resolution”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF32, pp. 590-592.
- M. Tadokoro, J. Hirota, K. Hiramoto, and M. Nishi, “Resonant Beam Extraction with Constant Separatrix”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 309-312.
- J. Iversen et al., “Development and Design of a RF-Measurement Machine for the European XFEL Cavity Fabrication”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO071, pp. 786-790.
- X. Liu et al., “The Design of Control System for the Optical Cavity Adjuster of a FEL-THz Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA044, pp. 1232-1234.
- A. Arzumanov et al., “Production of Plutonium, Yttrium and Strontium Tracers for Using in Environmental Research”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-21, pp. XX-XX.
- E. Renner et al., “Design and Evaluation of FCC-hh Injection Protection Schemes”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 854-857.
- K. Saito et al., “Accelerator Development for Advanced Particle Beam Therapy”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP129, pp. 1827-1829.
- M. Tigner et al., “The Energy Recovery Linac (ERL) as a Driver for X-ray Producing Insertion Devices”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA005, pp. 230-232.
- P. Moreau et al., “Failure Mode And Recovery Strategies For The Operation Of The Tore Supra Tokamak”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP098, pp. 591-593.
- E. Weihreter et al., “Status of the Superconducting Compact Storage Ring Cosy”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 237-240.
- A. Kanareykin, S. Kazakov, A. B. Kozyrev, E. Nenasheva, and V. P. Yakovlev, “Observation of an Anomalous Tuning Range of a Doped BST Ferroelectric Material Developed for Accelerator Applications”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB051, pp. 3987-3989.
- H. P. Chang, J. Chen, K. T. Hsu, C. C. Kuo, and Ch. Wang, “Modelling Modulation and Dynamic Tuning of Insertion Devices at SRRC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP116G, pp. 694-696.
- G. Pile, D. Bromberek, D. Horan, and A. Nassiri, “The Advanced Photon Source 352-MHz High-Power RF Test Stand”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH080, pp. 1396-1398.
- H. Chaloupka and H. Piel, “Non-Accelerator Applications of RF Superconductivity”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87C04, pp. XX-XX.
- J. C. Dooling, F. R. Brumwell, G. E. McMichael, M. E. Middendorf, and R. A. Zolecki, “Numerical Studies of a Second Harmonic RF Cavity for the IPNS RCS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP8, pp. 2274-2276.
Back to search