Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Blaskovic Kraljevic, D. Arominski, and D. Schulte, “Intra-Bunch Energy Spread Minimisation for CLIC Operation at a Centre-of-Mass Energy of 350 GeV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 458-460. doi:10.18429/JACoW-IPAC2019-MOPMP016
[n] W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
[n] L. L. Bandura, B. Erdelyi, and J. A. Nolen, “Optical Effects of Energy Degraders on the Performance of Fragment Separators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN088, pp. 3426-3428.
[n] S. Weih et al., “Development of a Cryogenic GaAs DC Photo-Gun for High-Current Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1391-1392. doi:10.18429/JACoW-IPAC2017-TUPAB032
[n] J. S. Wurtele et al., “Tunable Soft X-Ray Oscillator”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUOCI2, pp. 315-321.
[n] R. Chehab, Y. Thiery, and K. H??bner, “Simulation of Trajectory Control in LIL”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-14, pp. 469-471.
[n] S. Henrotin et al., “Commissioning and Testing of the First IBA S2C2”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 178-180. doi:10.18429/JACoW-Cyclotrons2016-TUP07
[n] G. Mazzitelli et al., “Crab Waist Scheme Luminosity and Background Diagnostic at DANE”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF029, pp. 172-176.
[n] G. A. Westenskow, “Scaling the TBNLC Collider Design to Higher Frequencies”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP30, pp. 396-398.
[n] S. Zaremba, S. De Neuter, J. G. M. Kleeven, B. Nactergal, V. Nuttens, and J. van de Walle, “Magnet Design of the New IBA Cyclotron for PET Radio-isotope Production”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 170-172. doi:10.18429/JACoW-Cyclotrons2016-TUP04
[n] C. H. Ho, W. K. Lau, J. I. Hwang, S. Y. Hsu, and Y. C. Liu, “The RF Gun Development at SRRC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB07, pp. 964-966.
[n] N. Eddy, W. Pellico, A. Semenov, D. C. Voy, and A. M. Waller, “A Longitudinal Digital Mode Damper System for the Fermilab Booster”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 320-322. doi:10.18429/JACoW-NAPAC2016-TUPOA17
[n] J. Vines, Y. Xie, and H. Padamsee, “Systematic Trends for the Medium Field Q-Slope”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP27, pp. XX-XX.
[n] J. Marriner and V. Shiltsev, “Accelerator Technology for the VLHC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA11, pp. 2638-2640.
[n] T. Shaftan et al., “High-Gain Harmonic Generation Free-Electron Laser at Saturation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA009, pp. 246-248.
[n] T. Kasuga, A. Mochihashi, T. Obina, and Y. Tanimoto, “Vertical Instability with Transient Characteristics Observed in KEK-PF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A04, pp. 1795-1797.
[n] N. Y. Joly et al., “New Tunable DUV Light Source for Seeding Free-electron Lasers”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPB16, pp. 38-40.
[n] K. Okamura and K. Takayama, “Development of an Induction Accelerator Cell Driver Utilizing 3.3 kV SiC-MOSFETs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3388-3390. doi:10.18429/JACoW-IPAC2017-WEPVA056
[n] Y. T. Yan, Y. Cai, W. S. Colocho, and F.-J. Decker, “Validation of PEP-II Resonantly Excited Turn-by-Turn BPM Data”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS070, pp. 3645-3647.
[n] J. K. Hao et al., “Improving Gradient of 9-cell SRF Cavities at Peking University”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP011, pp. 914-916.
[n] A. Kanareykin, P. Schoessow, and L. Sch?ñchter, “Progress towards an Experimental Test of an Active Microwave Medium Based Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS040, pp. 2463-2465.
[n] M. T. Crofford, M. Champion, K.-U. Kasemir, H. Ma, and M. F. Piller, “Operational Experience with the Spallation Neutron Source High Power Protection Module”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT058, pp. 3411-3413.
[n] J. D. Jarvis et al., “Adsorbate Modification of Emission from Diamond Field Emitters and Carbon Nanotubes”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC59, pp. 372-375.
[n] E. D. Courant, “Some Thoughts on Low-Velocity Traveling Waves”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-10, pp. 171-173.
[n] A. Chmielinska and M. J. Barnes, “New Spiral Beam Screen Design for the FCC-hh Injection Kicker Magnet”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 270-273. doi:10.18429/JACoW-IPAC2019-MOPGW074
[n] X. D. Yang, J. Li, X. M. Ma, L. J. Mao, M. T. Tang, and T. L. Yan, “Formation of Bunched Electron Beam at the Electron Cooler of CSRm”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUYAUD03, pp. 85-88.
[n] P. Mortazavi, J. Keane, S. Sharma, and M. Thomas, “Mechanical Design of SXLS Radio-Frequency Cavity”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 263-266.
[n] J. Qiu, N. Huang, J. Y. Tang, and S. Wang, “Physics Design of CSNS RCS Injection and Extraction System”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH04, pp. 32-34.
[n] S. G. Kadantsev, E. Klassen, M. M. Mouat, and P. W. Wilmshurst, “PCI to CAMAC Executive Crate Connection”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP101L, pp. 1824-1826.
[n] J. A. Clarke et al., “Assessing the Suitability of a Medical Cyclotron as an Injector for an Energy Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP19C, pp. 2374-2376.
[n] J. Qiu, J. Tang, S. Wang, and J. Wei, “Transverse Phase Space Painting for the CSNS Injection”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS115, pp. 1774-1776.
[n] G. P. Berg and D. L. Friesel, “Commissioning of the IUCF Cooler Injector Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP01F, pp. 496-498.
[n] V. G. Mikhailov, V. A. Rezvov, A. A. Roshchin, V. I. Sklyarenko, and L. I. Iudin, “High-Sensitive Ionization Detectors of Transverse Distribution of Accelerated Particles Beam”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-02, pp. 473-476.
[n] L. Ioudin, V. V. Martynenko, and V. A. Rezvov, “Kurchatov Synchrotron Radiation Source: General-Purpose TV System for Beam Monitoring and Inspection of Accelerator Equipment Rooms”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP084L, pp. 1719-1721.
[n] K. Dunkel, C. Piel, and H. Vogel, “100 MeV Pre-Injector for 3rd Generation Synchrotron Light Sources”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14017, pp. XX-XX.
[n] Y. Kim et al., “New Coherent Femtosecond Soft X-Ray FEL Facility at Duke University”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH062, pp. XX-XX.
[n] P. Mortazavi and D. Shu, “Thermal Conductance of Metallic Interface in Vacuum”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1891-1893.
[n] R. M. Lill, G. Decker, J. E. Hoyt, X. Sun, and B. X. Yang, “Design, Installation, and Commissioning Results for Suppressing Rogue TE Modes Impacting Vertical BPM Readings of the APS Storage Ring”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG012, pp. 50-52.
[n] Ch. Wang et al., “Stablization of the Spectral Intensity Fluctuations with the Higher Order Mode Frequency Tuners”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V022, pp. 1638-1640.
[n] D. Dale et al., “Custom Electronic Modules for the TRIUMF/ISAC Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_053.
[n] C. H. Chang et al., “Construction and Performance of the Elliptical Polarization Undulator EPU5.6 in SRRC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA23, pp. 2671-2673.
[n] M. L. Friend, “Challenges in Continuous Beam Profile Monitoring for MW-Power Proton Beams”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 253-256. doi:10.18429/JACoW-IBIC2019-TUBO03
[n] D. Teytelman, J. D. Fox, S. Prabhakar, and J. M. Byrd, “Frequency Resolved Measurement of Longitudinal Impedances Using Transient Beam Diagnostics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPA006, pp. 399-401.
[n] C.-X. Wang, “Injection of Beam Shaped Locally with Nonlinear Optics”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA056, pp. 187-189.
[n] S. Y. Xu, N. Wang, and S. Wang, “Effects of Magnetic Field Tracking Errors and Space Charge on Beam Dynamics at CSNS/RCS”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1A02, pp. 484-486.
[n] V. G. Mikhailov et al., “Highly-sensitive Ionization Detectors of Accelerated Beam Parameters for Wide Use”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1743-1746.
[n] R. Losito et al., “Testing Material Properties with High Energy Beams in HiRadMat at CERN”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C01, pp. 654-658.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Blaskovic Kraljevic, D. Arominski, and D. Schulte, “Intra-Bunch Energy Spread Minimisation for CLIC Operation at a Centre-of-Mass Energy of 350 GeV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 458-460.
- W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
- L. L. Bandura, B. Erdelyi, and J. A. Nolen, “Optical Effects of Energy Degraders on the Performance of Fragment Separators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN088, pp. 3426-3428.
- S. Weih et al., “Development of a Cryogenic GaAs DC Photo-Gun for High-Current Applications”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1391-1392.
- J. S. Wurtele et al., “Tunable Soft X-Ray Oscillator”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUOCI2, pp. 315-321.
- R. Chehab, Y. Thiery, and K. H??bner, “Simulation of Trajectory Control in LIL”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-14, pp. 469-471.
- S. Henrotin et al., “Commissioning and Testing of the First IBA S2C2”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 178-180.
- G. Mazzitelli et al., “Crab Waist Scheme Luminosity and Background Diagnostic at DANE”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF029, pp. 172-176.
- G. A. Westenskow, “Scaling the TBNLC Collider Design to Higher Frequencies”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP30, pp. 396-398.
- S. Zaremba, S. De Neuter, J. G. M. Kleeven, B. Nactergal, V. Nuttens, and J. van de Walle, “Magnet Design of the New IBA Cyclotron for PET Radio-isotope Production”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 170-172.
- C. H. Ho, W. K. Lau, J. I. Hwang, S. Y. Hsu, and Y. C. Liu, “The RF Gun Development at SRRC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB07, pp. 964-966.
- N. Eddy, W. Pellico, A. Semenov, D. C. Voy, and A. M. Waller, “A Longitudinal Digital Mode Damper System for the Fermilab Booster”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 320-322.
- J. Vines, Y. Xie, and H. Padamsee, “Systematic Trends for the Medium Field Q-Slope”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP27, pp. XX-XX.
- J. Marriner and V. Shiltsev, “Accelerator Technology for the VLHC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA11, pp. 2638-2640.
- T. Shaftan et al., “High-Gain Harmonic Generation Free-Electron Laser at Saturation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA009, pp. 246-248.
- T. Kasuga, A. Mochihashi, T. Obina, and Y. Tanimoto, “Vertical Instability with Transient Characteristics Observed in KEK-PF”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A04, pp. 1795-1797.
- N. Y. Joly et al., “New Tunable DUV Light Source for Seeding Free-electron Lasers”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOPB16, pp. 38-40.
- K. Okamura and K. Takayama, “Development of an Induction Accelerator Cell Driver Utilizing 3.3 kV SiC-MOSFETs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3388-3390.
- Y. T. Yan, Y. Cai, W. S. Colocho, and F.-J. Decker, “Validation of PEP-II Resonantly Excited Turn-by-Turn BPM Data”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS070, pp. 3645-3647.
- J. K. Hao et al., “Improving Gradient of 9-cell SRF Cavities at Peking University”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP011, pp. 914-916.
- A. Kanareykin, P. Schoessow, and L. Sch?ñchter, “Progress towards an Experimental Test of an Active Microwave Medium Based Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS040, pp. 2463-2465.
- M. T. Crofford, M. Champion, K.-U. Kasemir, H. Ma, and M. F. Piller, “Operational Experience with the Spallation Neutron Source High Power Protection Module”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT058, pp. 3411-3413.
- J. D. Jarvis et al., “Adsorbate Modification of Emission from Diamond Field Emitters and Carbon Nanotubes”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC59, pp. 372-375.
- E. D. Courant, “Some Thoughts on Low-Velocity Traveling Waves”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-10, pp. 171-173.
- A. Chmielinska and M. J. Barnes, “New Spiral Beam Screen Design for the FCC-hh Injection Kicker Magnet”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 270-273.
- X. D. Yang, J. Li, X. M. Ma, L. J. Mao, M. T. Tang, and T. L. Yan, “Formation of Bunched Electron Beam at the Electron Cooler of CSRm”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper TUYAUD03, pp. 85-88.
- P. Mortazavi, J. Keane, S. Sharma, and M. Thomas, “Mechanical Design of SXLS Radio-Frequency Cavity”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 263-266.
- J. Qiu, N. Huang, J. Y. Tang, and S. Wang, “Physics Design of CSNS RCS Injection and Extraction System”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH04, pp. 32-34.
- S. G. Kadantsev, E. Klassen, M. M. Mouat, and P. W. Wilmshurst, “PCI to CAMAC Executive Crate Connection”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP101L, pp. 1824-1826.
- J. A. Clarke et al., “Assessing the Suitability of a Medical Cyclotron as an Injector for an Energy Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP19C, pp. 2374-2376.
- J. Qiu, J. Tang, S. Wang, and J. Wei, “Transverse Phase Space Painting for the CSNS Injection”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS115, pp. 1774-1776.
- G. P. Berg and D. L. Friesel, “Commissioning of the IUCF Cooler Injector Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP01F, pp. 496-498.
- V. G. Mikhailov, V. A. Rezvov, A. A. Roshchin, V. I. Sklyarenko, and L. I. Iudin, “High-Sensitive Ionization Detectors of Transverse Distribution of Accelerated Particles Beam”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXD-02, pp. 473-476.
- L. Ioudin, V. V. Martynenko, and V. A. Rezvov, “Kurchatov Synchrotron Radiation Source: General-Purpose TV System for Beam Monitoring and Inspection of Accelerator Equipment Rooms”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP084L, pp. 1719-1721.
- K. Dunkel, C. Piel, and H. Vogel, “100 MeV Pre-Injector for 3rd Generation Synchrotron Light Sources”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14017, pp. XX-XX.
- Y. Kim et al., “New Coherent Femtosecond Soft X-Ray FEL Facility at Duke University”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH062, pp. XX-XX.
- P. Mortazavi and D. Shu, “Thermal Conductance of Metallic Interface in Vacuum”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1891-1893.
- R. M. Lill, G. Decker, J. E. Hoyt, X. Sun, and B. X. Yang, “Design, Installation, and Commissioning Results for Suppressing Rogue TE Modes Impacting Vertical BPM Readings of the APS Storage Ring”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG012, pp. 50-52.
- Ch. Wang et al., “Stablization of the Spectral Intensity Fluctuations with the Higher Order Mode Frequency Tuners”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V022, pp. 1638-1640.
- D. Dale et al., “Custom Electronic Modules for the TRIUMF/ISAC Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_053.
- C. H. Chang et al., “Construction and Performance of the Elliptical Polarization Undulator EPU5.6 in SRRC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA23, pp. 2671-2673.
- M. L. Friend, “Challenges in Continuous Beam Profile Monitoring for MW-Power Proton Beams”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 253-256.
- D. Teytelman, J. D. Fox, S. Prabhakar, and J. M. Byrd, “Frequency Resolved Measurement of Longitudinal Impedances Using Transient Beam Diagnostics”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPA006, pp. 399-401.
- C.-X. Wang, “Injection of Beam Shaped Locally with Nonlinear Optics”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA056, pp. 187-189.
- S. Y. Xu, N. Wang, and S. Wang, “Effects of Magnetic Field Tracking Errors and Space Charge on Beam Dynamics at CSNS/RCS”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO1A02, pp. 484-486.
- V. G. Mikhailov et al., “Highly-sensitive Ionization Detectors of Accelerated Beam Parameters for Wide Use”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1743-1746.
- R. Losito et al., “Testing Material Properties with High Energy Beams in HiRadMat at CERN”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C01, pp. 654-658.
Back to search