JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	V. P. Yakovlev et al., “Status of the SRF Development for the Project X”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP015, pp. 117-122. 
[n]	A. Valishev, G. Annala, V. A. Lebedev, and R. S. Moore, “Correction of Second Order Chromaticity at Tevatron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS015, pp. 3922-3924. 
[n]	E. Pozdeyev, F. Marti, J. A. Rodriguez, and R. C. York, “Space Charge Effect in Isochronous Rings”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA30, pp. 157-164. 
[n]	Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814. 
[n]	H. Guler et al., “XFEL Couplers RF Conditioning at LAL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2125-2127. doi:10.18429/JACoW-IPAC2016-WEPMB006
[n]	K. Dahlerup-Petersen, B. Kazmine, V. Popov, V. Sytchev, L. Vassiliev, and V. Zubko, “Energy Extraction Resistors for the Main Dipole and Quadrupole Circuits of the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B09, pp. 2420-2422. 
[n]	G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 414-420. 
[n]	G. Portmann and D. Robin, “Beam Based Alignment Of C-Shaped Quadrupole Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP45C, pp. 620-622. 
[n]	R. Pardo, L. M. Bollinger, and W. Henning, “Longitudinal Beam Optimization of the Argonne Superconducting Heavy-Ion Linear Accelerator”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H05, pp. 270-273. 
[n]	J. Mammosser et al., “Status of the Production Electropolishing System at JLAB”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB062, pp. 2860-2862. 
[n]	S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Adiabaticity and Reversibility Studies for Beam Splitting Using Stable Resonances”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC051, pp. 3095-3097. 
[n]	A. V. Eliseev et al., “Dynamics of 197Au78+ Ions Generated in Recombination with Cooling Electrons in the NICA Collider”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA016, pp. 275-277. 
[n]	K. Li et al., “A Project of Tandem Accelerator Mass Spectrometry Facility at Peking University”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1471-1474. 
[n]	G. Swift, M. Johnson, and V. N. Litvinenko, “Duke FEL Lab Storage Ring ARC Vacuum System Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH038, pp. 2171-2173. 
[n]	S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n]	J. M. Bogaty, B. E. Clifft, and R. C. Pardo, “A Very Wide Bandwidth Faraday Cup Suitable for Measuring Gigahertz Structure on Ion Beams with Velocities Down to < 0.01”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU457, pp. 465-467. 
[n]	M. Pieck et al., “LANSCE Control System Front-End and Infrastructure Hardware Upgrades”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS010, pp. 343-346. 
[n]	R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3280-3283. 
[n]	P. Van Arsdall et al., “The National Ignition Facility: Status of the Integrated Computer Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MO102, pp. XX-XX. 
[n]	S. Baturin, A. Altmark, I. L. Sheynman, and A. Kanareykin, “Parameter Optimization of a Rectangular Dielectric Based Wakefield Accelerating Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA008, pp. 260-262. 
[n]	K. B. Scheidt and F. Epaud, “Installation and Commissioning of a Complete Upgrade of the BPM System for the ESRF Storage Ring”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD05, pp. 50-52. 
[n]	F. J. Decker, D. Farkas, L. Rinolfi, and J. Truher, “Reducing Energy Spread for Long Bunch Train at SLAC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP124G, pp. 828-830. 
[n]	D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX. 
[n]	D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314. 
[n]	V. Khodnevych et al., “Study of a Smith-Purcell Radiation-Based Longitudinal Profile Monitor at the CLIO Free Electron Laser”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 132-134. doi:10.18429/JACoW-IPAC2017-MOPAB026
[n]	F. M. Esser et al., “Development Work for a Short Curved Superconducting Dipole Magnet for the HESR at FAIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD011, pp. 2425-2427. 
[n]	D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3297-3300. 
[n]	A. Galat?â et al., “ADIGE: The Radioactive Ion Beam Injector of the SPES Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2281-2283. doi:10.18429/JACoW-IPAC2017-TUPVA087
[n]	C. J. R. Duncan, P. Cueva, J. M. Maxson, and D. A. Muller, “Improving Energy Resolution and Compensating Chromatic Aberration With a TM010 Microwave Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 411-413. doi:10.18429/JACoW-NAPAC2019-TUPLM18
[n]	W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3277-3280. 
[n]	H. Brown et al., “Design, Fabrication and Testing of the BNL Radio Frequency Quadrupole Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0007, pp. 65-67. 
[n]	W. V. Hassenzahl, E. Hoyer, and R. Savoy, “Design and Test of a Model Pole for the ALS U5.0 Undulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2736-2739. 
[n]	T. Itahashi, Y. Fujita, T. Fukuda, T. Shimoda, T. Yamagata, and Y. Nagame, “Mass Spectrometry of 41Ca with RCNP AVF Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-19, pp. 664-666. 
[n]	B. G. Cade, L. Egoriti, A. Gottberg, and D. R. Priessl, “Thermal Design of a 100 kW Electron to Gamma Converter at TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4520-4523. doi:10.18429/JACoW-IPAC2018-THPMK094
[n]	A. Schempp, H. Deitinghoff, H. Klein, C. Herrlander, A. K?ñllberg, and A. Soltan, “The Cryring RFQ”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-13, pp. 70-72. 
[n]	V. S. Morozov et al., “Spin-Manipulating Polarized Deuterons”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCN2, pp. 747-751. 
[n]	R. B. Palmer et al., “High-Energy High-Luminosity μ+ μ- Collider Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MXG03, pp. 53-57. 
[n]	J. E. Katuin, J. C. Collins, C. Hagen, W. Manwaring, and P. Zolnierczuk, “Design of a Treatment Control System for a Proton Therapy Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUOAFI02, pp. 958-960. 
[n]	J. N. Corlett, J. Johnson, G. Lambertson, and F. Voelker, “Longitudinal and Transverse Feedback Kickers for the ALS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1625-1628. 
[n]	I. L. Sheynman, A. Altmark, S. Baturin, and A. Kanareykin, “The Analysis of Tunable Dielectric Loaded Wakefield Accelerating Structure of Rectangular Geometry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD057, pp. 4413-4415. 
[n]	M. S. Zisman and J. C. Gallardo, “A Possible Hybrid Cooling Channel for a Neutrino Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE074, pp. 3515-3517. 
[n]	F. Di Maio et al., “Development of the ITER CODAC Core Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOC005, pp. 22-24. 
[n]	G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806. 
[n]	W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2296-2299. doi:10.18429/JACoW-IPAC2019-WEZZPLS3
[n]	K. Wang, S. Jin, Z. Wang, and J. Zhang, “Comparison of Water Absorbed Dose for Photons of Linac and Traceability System for Radiotherapy in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 537-539. doi:10.18429/JACoW-IPAC2018-MOPML058
[n]	J. Aron et al., “Status of the Argonne Superconducting-Linac Heavy-Ion Booster”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper A203, pp. 25-28. 
[n]	G. G. Denisov et al., “Development of Millimeter-Wave FEM for Electron-Positron Colliders”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04K, pp. 1915-1917. 
[n]	D. Engwall et al., “A High-DC-Voltage GaAs Photoemission Gun: Transverse Emittance and Momentum Spread Measurements”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C012, pp. 2693-2695. 
[n]	V. N. Litvinenko, B. Burnham, N. Hower, P. Morcombe, and Y. Wu, “Duke Storage Ring Tune Measurements System using Razor Blade and Photomultiplier”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ06, pp. 2461-2463. 
[n]	P. R. Bolton et al., “New Design Study and Related Experimental Program for the LCLS RF Photoinjector”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B14, pp. 1642-1644. 
[n]	R. Alvarez, R. Borghi, and J. Weaver, “Precision Phase Adjustment of a Linear Accelerator High Power Waveguide Feed Network”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 39-44. 
[n]	D. R. Moffett and R. L. Barner, “An Intense H- Source for the IPNS-I Rapid Cycling Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2678-2681. 
[n]	W. W. MacKay et al., “Commissioning and Future Plans for Polarized Protons in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA004, pp. 24-26. 
[n]	E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 513-515. doi:10.18429/JACoW-LINAC2018-TUPO076
[n]	X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800. 
[n]	P. K. Den Hartog, J. M. Bogaty, L. M. Bollinger, B. E. Clifft, R. C. Pardo, and K. W. Shepard, “The Beam Bunching and Transport System of the Argonne Positive Ion Injector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 545-548. 
[n]	R. Frankel et al., “The AGS Booster Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1090-1093. 
[n]	J. D. Gilpatrick et al., “Experience with the Low Energy Demonstration Accelerator (LEDA) Halo Experiment Beam Instrumentation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH097, pp. 2311-2313. 
[n]	M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18
[n]	D. P. Piso, I. Arredondo, M. Eguiraun, and S. Varnasseri, “ESS Bilbao Interlock System Approach”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC052, pp. 206-209. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search