Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. D. Fuerst, M. Kedzie, K. W. Shepard, and M. Kelly, “Cold Tests of a Superconducting Co-Axial Half-Wave Cavity for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP06, pp. 608-610.
[n] K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304.
[n] H. Kleines, J. Sarkadi, F. Suxdorf, and K. Zwoll, “PROFInet - an Integrated Automation Concept Based on Ethernet”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP537, pp. XX-XX.
[n] S-C. Kim, N. S. Froemming, D. L. Rubin, and D. Stratakis, “The Muon Injection Simulation Study for the Muon g-2 Experiment at Fermilab”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 803-806. doi:10.18429/JACoW-NAPAC2016-WEPOA46
[n] D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
[n] R. Wanzenberg, L. Bellantoni, H. Edwards, and M. McAshan, “Design and Measurements of a Deflecting Mode Cavity for an RF Separator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH129, pp. 1077-1079.
[n] Z. B. du Toit, S. J. Burger, P. J. Celliers, E. P. Conard, J. J. Kritzinger, and L. M. M. Roels, “Operating Experience with the Light-Ion Injector of the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-21, pp. 109-112.
[n] P. Fernandez Carmona et al., “Development of a PXI Based Test Stand for Automatization of the Quality Assurance of the Patient Safety System in a Proton Therapy Centre”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1604-1607. doi:10.18429/JACoW-ICALEPCS2017-THPHA098
[n] V. Variale et al., “The Charge State Breeder BRIC: Status Report”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO449, pp. 151-153.
[n] R. Perry, “Some Thoughts Related to Cryogenic Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-15, pp. 206-208.
[n] P. M. Strubin and N. Fietier, “Using Distributed Intelligence to Control the Vacuum System of a Very Large Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 863-866.
[n] R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2777-2779. doi:10.18429/JACoW-IPAC2019-WEPGW120
[n] P. H. Nallin, J. G. R. S, G. F. Freitas, and R. W. Polli, “Expandable and Modular Monitoring and Actuation System for Engineering Cabinets at Sirius Light Source”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 710-714. doi:10.18429/JACoW-ICALEPCS2021-WEPV027
[n] A. Z. Babaian et al., “Septum Magnet for Electron Extraction System at the Synchrotron EPI”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1491-1493.
[n] H. Jeevakhan, S. M. Khan, and G. Mishra, “Design of Scilab Xcos Simulation Model for Pulsed Wire Method Data Analyses”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2741-2743. doi:10.18429/JACoW-IPAC2022-THPOPT063
[n] J. C. Sheppard et al., “Implementation of Nonintercepting Energy Spread Monitors”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 757-760.
[n] F. Franchi, T. Beier, M. Kirk, M. Moritz, G. Rumolo, and R. Tomas, “A Method to Measure the Skew Quadrupole Strengths in the SIS-18 using Two BPMs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT052, pp. 1957-1959.
[n] X. Serra-Gallifa et al., “Fast Orbit Feedback Implementation at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC115, pp. 1328-1330.
[n] S. Wunderlich, S. Schefer, B. Schmidt, S. Schulz, S. Wesch, and M. C. Hoffmann, “Characterization of Single-cycle THz Pulses at the CTR Source at FLASH”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD54, pp. 500-502.
[n] A. I. Kvasha et al., “A New 200 MHz Powerful Pulse Triode for the Output Power Amplifier of DTL RF System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH318, pp. 1222-1224.
[n] X. Lu, X. Liu, Q. Tian, H. Wang, and L. Yan, “An electron beam modulation laser for steady-state microbunching”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1413-1416. doi:10.18429/JACoW-IPAC2024-TUPG72
[n] J. S. Lee, B. H. Choi, J. H. Ha, J. K. Kil, and J. H. Lee, “Enhancement of IC Tray's Surface Conductivity Using Accelerator Technology”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH315, pp. 2799-2801.
For LaTeX
Use Complete Form
For BibTeX
References
- J. D. Fuerst, M. Kedzie, K. W. Shepard, and M. Kelly, “Cold Tests of a Superconducting Co-Axial Half-Wave Cavity for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP06, pp. 608-610.
- K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304.
- H. Kleines, J. Sarkadi, F. Suxdorf, and K. Zwoll, “PROFInet - an Integrated Automation Concept Based on Ethernet”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP537, pp. XX-XX.
- S-C. Kim, N. S. Froemming, D. L. Rubin, and D. Stratakis, “The Muon Injection Simulation Study for the Muon g-2 Experiment at Fermilab”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 803-806.
- D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
- R. Wanzenberg, L. Bellantoni, H. Edwards, and M. McAshan, “Design and Measurements of a Deflecting Mode Cavity for an RF Separator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH129, pp. 1077-1079.
- Z. B. du Toit, S. J. Burger, P. J. Celliers, E. P. Conard, J. J. Kritzinger, and L. M. M. Roels, “Operating Experience with the Light-Ion Injector of the NAC”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-21, pp. 109-112.
- P. Fernandez Carmona et al., “Development of a PXI Based Test Stand for Automatization of the Quality Assurance of the Patient Safety System in a Proton Therapy Centre”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1604-1607.
- V. Variale et al., “The Charge State Breeder BRIC: Status Report”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO449, pp. 151-153.
- R. Perry, “Some Thoughts Related to Cryogenic Linacs”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-15, pp. 206-208.
- P. M. Strubin and N. Fietier, “Using Distributed Intelligence to Control the Vacuum System of a Very Large Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 863-866.
- R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2777-2779.
- P. H. Nallin, J. G. R. S, G. F. Freitas, and R. W. Polli, “Expandable and Modular Monitoring and Actuation System for Engineering Cabinets at Sirius Light Source”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 710-714.
- A. Z. Babaian et al., “Septum Magnet for Electron Extraction System at the Synchrotron EPI”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1491-1493.
- H. Jeevakhan, S. M. Khan, and G. Mishra, “Design of Scilab Xcos Simulation Model for Pulsed Wire Method Data Analyses”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2741-2743.
- J. C. Sheppard et al., “Implementation of Nonintercepting Energy Spread Monitors”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 757-760.
- F. Franchi, T. Beier, M. Kirk, M. Moritz, G. Rumolo, and R. Tomas, “A Method to Measure the Skew Quadrupole Strengths in the SIS-18 using Two BPMs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT052, pp. 1957-1959.
- X. Serra-Gallifa et al., “Fast Orbit Feedback Implementation at Alba Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC115, pp. 1328-1330.
- S. Wunderlich, S. Schefer, B. Schmidt, S. Schulz, S. Wesch, and M. C. Hoffmann, “Characterization of Single-cycle THz Pulses at the CTR Source at FLASH”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD54, pp. 500-502.
- A. I. Kvasha et al., “A New 200 MHz Powerful Pulse Triode for the Output Power Amplifier of DTL RF System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH318, pp. 1222-1224.
- X. Lu, X. Liu, Q. Tian, H. Wang, and L. Yan, “An electron beam modulation laser for steady-state microbunching”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG72, pp. 1413-1416.
- J. S. Lee, B. H. Choi, J. H. Ha, J. K. Kil, and J. H. Lee, “Enhancement of IC Tray's Surface Conductivity Using Accelerator Technology”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH315, pp. 2799-2801.
Back to search