Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. J. Ericson, D. Bertwistle, and M. J. Boland, “Energy Compression System Radio Frequency Design at the Canadian Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4231-4233. doi:10.18429/JACoW-IPAC2021-THPAB223
[n] M. Moeini Rizi et al., “Light-induced enhancement of quantum efficiency in III-nitride photocathodes”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 786-789. doi:10.18429/JACoW-NAPAC2025-WEP055
[n] H. O. Moser et al., “Synchrotron Radiation Research at Singapore Synchrotron Light Source”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM102, pp. XX-XX.
[n] R. M. Seraphim et al., “Large Vacuum Intervention to Install New BPMs and Radiation Absorbers in the LNLS Electron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA004, pp. 2475-2477.
[n] T. Idso, A. Ullattuparambil, M. Moeini Rizi, A. Rice, K. Alberi, and S. Karkare, “Investigating Dirac semimetal cadmium arsenide as a potential low-MTE photocathode”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 773-777. doi:10.18429/JACoW-NAPAC2025-WEP047
[n] P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258.
[n] F. H. Cardoso, S. R. Marques, and X. R. Resende, “Comissioning of a BPM system for the LNLS Booster to Storage Ring Transfer Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP166, pp. 405-407.
[n] H. Tarawneh et al., “Universal mode of operation of the APPLE II undulators at the MAX IV 1.5 GeV ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1307-1310. doi:10.18429/JACoW-IPAC2025-TUPM066
[n] Z. M. Dai, D. M. Li, G. Q. Lin, G. Y. Wu, M. Chen, and Z. T. Zhao, “An Intense Electron Linac for Pulsed Radiolysis Research at SINAP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11011, pp. XX-XX.
[n] T. Konstantin et al., “Cold Test of the Coaxial Cavity for Thermionic Triode Type RF Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI020, pp. 324-326.
[n] Y. Li et al., “In-situ Secondary Electron Yield Measurement System at CesrTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP230, pp. 1253-1255.
[n] M. Warren et al., “Development of Hybrid Superconducting Photocathodes on Niobium Using High QE Coatings”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 205-209. doi:10.18429/JACoW-SRF2017-MOPB065
[n] J. Campmany and M. Traveria, “Pulsed Magnets for Injection and Extraction at LSB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP125G, pp. 2491-2493.
[n] H. Hassanzadegan, A. Jansson, and A. J. Johansson, “Beam Position Monitor System of the ESS Linac”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP238, pp. 133-135.
[n] L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
[n] H. Zen et al., “Present Status of Mid-infrared Free Electron Laser Facility in Kyoto University”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA013, pp. 1190-1192.
[n] Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000.
[n] H. Hassanzadegan and F. P?®rez, “Analogue LLRF for the ALBA Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC147, pp. 1416-1418.
[n] X. He, J. Lei, and J. R. Zhang, “Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2422-2424. doi:10.18429/JACoW-IPAC2018-WEPMF031
[n] J. Gronberg et al., “Lasers and Optics for a Gamma-Gamma Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH055, pp. 3801-3803.
[n] J. H. Dai, Z. M. Dai, and H. X. Deng, “Design of Shanghai High Power THz -FEL Source”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB06, pp. 271-273.
[n] R. J. Woolliscroft, C. Coles, M. Gerring, and M. R. Pearson, “Quick EXAFS Experiments Using a New GDA Eclipse RCP GUI with EPICS Hardware Control”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS002, pp. 771-774.
[n] A. Thiel, M. Ebbeni, and H. Tarawneh, “Apple II Insertion Devices Made at MAXIV”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 6-10. doi:10.18429/JACoW-MEDSI2018-TUOPMA04
[n] M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4047-4049. doi:10.18429/JACoW-IPAC2016-THPOW046
[n] P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
[n] H. Tomizawa et al., “Status of SPring-8 Photocathode Rf Gun for Future Light Sources”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP042, pp. XX-XX.
[n] F. P?®rez, H. Hassanzadegan, and A. Salom, “Analogue and Digital Low Level RF for the ALBA Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH194, pp. 1468-1470.
[n] J. P. Dai, B. Ni, J. Y. Zhai, and J. R. Zhang, “Design Study of a Compact Deflecting Cavity at IHEP”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2188-2190. doi:10.18429/JACoW-IPAC2016-WEPMB030
[n] Y. Shoji et al., “NewSUBARU Storage Ring : Operational Progress in These Three Years”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THA101, pp. XX-XX.
[n] A. Mizuno, T. Higo, J. Odagiri, and H. Yonezawa, “X-Band Klystrons for Japan Linear Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1918-1921.
[n] Y. Ohkubo, H. Yonezawa, T. Shintake, H. Matsumoto, and N. Akasaka, “The C-Band 50MW Klystron Using Traveling-Wave Output Structure”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4071, pp. 932-934.
[n] H. Shaker, A. Bertwistle, E. J. Ericson, E. Soltan, and Y. Yousefi Sigari, “Study of Non-destructive BPM-Based Energy Measurement of the Canadian Light Source Linac”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 438-441. doi:10.18429/JACoW-IBIC2023-WEP036
For LaTeX
Use Complete Form
For BibTeX
References
- E. J. Ericson, D. Bertwistle, and M. J. Boland, “Energy Compression System Radio Frequency Design at the Canadian Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4231-4233.
- M. Moeini Rizi et al., “Light-induced enhancement of quantum efficiency in III-nitride photocathodes”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 786-789.
- H. O. Moser et al., “Synchrotron Radiation Research at Singapore Synchrotron Light Source”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper WEM102, pp. XX-XX.
- R. M. Seraphim et al., “Large Vacuum Intervention to Install New BPMs and Radiation Absorbers in the LNLS Electron Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA004, pp. 2475-2477.
- T. Idso, A. Ullattuparambil, M. Moeini Rizi, A. Rice, K. Alberi, and S. Karkare, “Investigating Dirac semimetal cadmium arsenide as a potential low-MTE photocathode”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 773-777.
- P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258.
- F. H. Cardoso, S. R. Marques, and X. R. Resende, “Comissioning of a BPM system for the LNLS Booster to Storage Ring Transfer Line”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP166, pp. 405-407.
- H. Tarawneh et al., “Universal mode of operation of the APPLE II undulators at the MAX IV 1.5 GeV ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM066, pp. 1307-1310.
- Z. M. Dai, D. M. Li, G. Q. Lin, G. Y. Wu, M. Chen, and Z. T. Zhao, “An Intense Electron Linac for Pulsed Radiolysis Research at SINAP”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11011, pp. XX-XX.
- T. Konstantin et al., “Cold Test of the Coaxial Cavity for Thermionic Triode Type RF Gun”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI020, pp. 324-326.
- Y. Li et al., “In-situ Secondary Electron Yield Measurement System at CesrTA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP230, pp. 1253-1255.
- M. Warren et al., “Development of Hybrid Superconducting Photocathodes on Niobium Using High QE Coatings”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 205-209.
- J. Campmany and M. Traveria, “Pulsed Magnets for Injection and Extraction at LSB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP125G, pp. 2491-2493.
- H. Hassanzadegan, A. Jansson, and A. J. Johansson, “Beam Position Monitor System of the ESS Linac”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP238, pp. 133-135.
- L. G. Liu et al., “Commissioning of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC042, pp. 2079-2081.
- H. Zen et al., “Present Status of Mid-infrared Free Electron Laser Facility in Kyoto University”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA013, pp. 1190-1192.
- Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000.
- H. Hassanzadegan and F. P?®rez, “Analogue LLRF for the ALBA Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC147, pp. 1416-1418.
- X. He, J. Lei, and J. R. Zhang, “Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2422-2424.
- J. Gronberg et al., “Lasers and Optics for a Gamma-Gamma Collider”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH055, pp. 3801-3803.
- J. H. Dai, Z. M. Dai, and H. X. Deng, “Design of Shanghai High Power THz -FEL Source”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPB06, pp. 271-273.
- R. J. Woolliscroft, C. Coles, M. Gerring, and M. R. Pearson, “Quick EXAFS Experiments Using a New GDA Eclipse RCP GUI with EPICS Hardware Control”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS002, pp. 771-774.
- A. Thiel, M. Ebbeni, and H. Tarawneh, “Apple II Insertion Devices Made at MAXIV”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 6-10.
- M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4047-4049.
- P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
- H. Tomizawa et al., “Status of SPring-8 Photocathode Rf Gun for Future Light Sources”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP042, pp. XX-XX.
- F. P?®rez, H. Hassanzadegan, and A. Salom, “Analogue and Digital Low Level RF for the ALBA Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH194, pp. 1468-1470.
- J. P. Dai, B. Ni, J. Y. Zhai, and J. R. Zhang, “Design Study of a Compact Deflecting Cavity at IHEP”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2188-2190.
- Y. Shoji et al., “NewSUBARU Storage Ring : Operational Progress in These Three Years”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THA101, pp. XX-XX.
- A. Mizuno, T. Higo, J. Odagiri, and H. Yonezawa, “X-Band Klystrons for Japan Linear Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1918-1921.
- Y. Ohkubo, H. Yonezawa, T. Shintake, H. Matsumoto, and N. Akasaka, “The C-Band 50MW Klystron Using Traveling-Wave Output Structure”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4071, pp. 932-934.
- H. Shaker, A. Bertwistle, E. J. Ericson, E. Soltan, and Y. Yousefi Sigari, “Study of Non-destructive BPM-Based Energy Measurement of the Canadian Light Source Linac”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP036, pp. 438-441.
Back to search