Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
[n] J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2847-2850.
[n] S. Hanasz, K. Czuba, B. Gasowski, L. Z. Zembala, and H. Schlarb, “Optimisation of a Low-Noise 1.3 GHz PLL Frequency Synthesizer for the European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1595-1598. doi:10.18429/JACoW-ICALEPCS2017-THPHA092
[n] L. Corner, L. J. Nevay, and R. Walczak, “Photonic Crystal Fibre Laser for Electron Beam Emittance Measurement”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO042, pp. 577-579.
[n] N. Lecesne et al., “SHyPIE: A New Source for On Line Production of Multicharged Radioactive Condensable Ion Beams”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-08, pp. 362-365.
[n] L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
[n] I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3147-3150. doi:10.18429/JACoW-IPAC2023-WEPL018
[n] A. S. Gurevich, E. A. Myae, V. G. Tishin, and E. F. Troyanov, “Upgrading 70 GeV IHEP Accelerator as UNK Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 415-417.
[n] B. Shin et al., “Development of CMOS beam loss monitor for Korea-4GSR”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 271-274. doi:10.18429/JACoW-IBIC2025-MOPMO37
[n] C. Huang et al., “Monte-Carlo photoemission model for thin film semiconductors under high fields”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2097-2100. doi:10.18429/JACoW-IPAC2024-WEPC58
[n] C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Beam Profile Monitoring at COSY via Light Emitted by Residual Gas”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB10, pp. 185-187.
[n] D. El Khechen, P. Bambade, D. Jehanno, and C. Rimbault, “Fast Luminosity Monitoring using Diamond Sensors for the Super Flavor Factory SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3442-3444. doi:10.18429/JACoW-IPAC2014-THPME090
[n] B. Fernandez Adiego, E. Blanco Vinuela, and I. Prieto Barreiro, “UNICOS CPC6: Automated Code Generation for Process Control Applications”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS033, pp. 871-874.
[n] Y. Ivanyushenkov et al., “Development Status of a Magnetic Measurement System for the APS Superconducting Undulator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP243, pp. 1286-1288.
[n] M. Stampfer and P. Elleaume, “A 4T Superconducting Wiggler for the ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2316-2319.
[n] K. Bertsche et al., “PEP-II status”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH05, pp. XX-XX.
[n] A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1007-1011. doi:10.18429/JACoW-ICALEPCS2017-TUSH303
[n] S. Wang, C. Christou, R. Fielder, P. Gu, and I. Martin, “RF feedback simulation for Diamond-II using ELEGANT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1099-1102. doi:10.18429/JACoW-IPAC2023-MOPM047
[n] I. S. K. Gardner, D. A. Gray, M. R. Harold, C. W. Planner, C. R. Prior, and G. H. Rees, “Progress at ISIS and Possible Future Developments”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 440-443.
[n] J. B. Flanz, “Symmetry Corrected Second Order Achromat”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1349-1352.
[n] A. Beloglazov, E. Giannico, V. Nassisi, and A. Rain, “Emittance Measurements of Electron Beams Generated from Cu and Diamond Photocathodes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP33G, pp. 1456-1458.
[n] R. C. Pardo, “Investigation of a Superconducting Beam Splitter for ATLAS”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0038, pp. 433-435.
[n] S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
[n] R. Tavcar, J. Dedic, Z. Kroflic, R. Stefanic, and J. Gutleber, “Timing System for MedAustron Based on Off-The-Shelf MRF Transport Layer”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC147, pp. 424-426.
[n] O. Calvo, J. Flanz, and T. Russ, “BPM Data Acquisition System for the Bates Pulse Stretcher Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1467-1470.
[n] A. Winter et al., “Conceptual Design of the ITER Plasma Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP110, pp. 337-339.
[n] P. Marchand, M. D. Diop, M. Luong, O. Piquet, F. Ribeiro, and R. Sreedharan, “Digital Low Level RF System for SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC144, pp. 1407-1409.
[n] A. Devred, “High Field Accelerator Magnets Beyond LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB002, pp. 146-150.
[n] P. Niedermayer et al., “First implementation of RF-KO slow extraction at COSY”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3568-3570. doi:10.18429/JACoW-IPAC2024-THPR34
[n] V. A. Isaev, N. Claesson, M. Plesko, and K. Zagar, “EPICS Data Acquisition Device Support”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC059, pp. 707-709.
[n] G. Cavallari, I. Gorine, D. G??sewell, and R. Stierlin, “Pressure Protection Against Vacuum Failures on the Cryostats for LEP SC Cavities”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G28, pp. XX-XX.
[n] H. Braun, E. Boggasch, D. H. H. Hoffmann, and A. Tauschwitz, “Application of Plasma Lenses in Positron Sources”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1650-1653.
[n] P. Bambade et al., “In Vacuum High Accuracy Mechanical Positioning System of Nano Resolution Beam Position Monitor at the Interaction Point of ATF2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOCB203, pp. 1149-1151.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
- J. B. Flanz, S. Kowalski, and C. P. Sargent, “An Isochronous Beam Recirculation Magnet System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2847-2850.
- S. Hanasz, K. Czuba, B. Gasowski, L. Z. Zembala, and H. Schlarb, “Optimisation of a Low-Noise 1.3 GHz PLL Frequency Synthesizer for the European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1595-1598.
- L. Corner, L. J. Nevay, and R. Walczak, “Photonic Crystal Fibre Laser for Electron Beam Emittance Measurement”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO042, pp. 577-579.
- N. Lecesne et al., “SHyPIE: A New Source for On Line Production of Multicharged Radioactive Condensable Ion Beams”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-08, pp. 362-365.
- L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
- I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL018, pp. 3147-3150.
- A. S. Gurevich, E. A. Myae, V. G. Tishin, and E. F. Troyanov, “Upgrading 70 GeV IHEP Accelerator as UNK Injector”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 415-417.
- B. Shin et al., “Development of CMOS beam loss monitor for Korea-4GSR”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 271-274.
- C. Huang et al., “Monte-Carlo photoemission model for thin film semiconductors under high fields”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC58, pp. 2097-2100.
- C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Beam Profile Monitoring at COSY via Light Emitted by Residual Gas”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB10, pp. 185-187.
- D. El Khechen, P. Bambade, D. Jehanno, and C. Rimbault, “Fast Luminosity Monitoring using Diamond Sensors for the Super Flavor Factory SuperKEKB”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3442-3444.
- B. Fernandez Adiego, E. Blanco Vinuela, and I. Prieto Barreiro, “UNICOS CPC6: Automated Code Generation for Process Control Applications”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS033, pp. 871-874.
- Y. Ivanyushenkov et al., “Development Status of a Magnetic Measurement System for the APS Superconducting Undulator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP243, pp. 1286-1288.
- M. Stampfer and P. Elleaume, “A 4T Superconducting Wiggler for the ESRF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2316-2319.
- K. Bertsche et al., “PEP-II status”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH05, pp. XX-XX.
- A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1007-1011.
- S. Wang, C. Christou, R. Fielder, P. Gu, and I. Martin, “RF feedback simulation for Diamond-II using ELEGANT”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM047, pp. 1099-1102.
- I. S. K. Gardner, D. A. Gray, M. R. Harold, C. W. Planner, C. R. Prior, and G. H. Rees, “Progress at ISIS and Possible Future Developments”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 440-443.
- J. B. Flanz, “Symmetry Corrected Second Order Achromat”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1349-1352.
- A. Beloglazov, E. Giannico, V. Nassisi, and A. Rain, “Emittance Measurements of Electron Beams Generated from Cu and Diamond Photocathodes”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP33G, pp. 1456-1458.
- R. C. Pardo, “Investigation of a Superconducting Beam Splitter for ATLAS”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0038, pp. 433-435.
- S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
- R. Tavcar, J. Dedic, Z. Kroflic, R. Stefanic, and J. Gutleber, “Timing System for MedAustron Based on Off-The-Shelf MRF Transport Layer”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC147, pp. 424-426.
- O. Calvo, J. Flanz, and T. Russ, “BPM Data Acquisition System for the Bates Pulse Stretcher Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1467-1470.
- A. Winter et al., “Conceptual Design of the ITER Plasma Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP110, pp. 337-339.
- P. Marchand, M. D. Diop, M. Luong, O. Piquet, F. Ribeiro, and R. Sreedharan, “Digital Low Level RF System for SOLEIL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC144, pp. 1407-1409.
- A. Devred, “High Field Accelerator Magnets Beyond LHC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAB002, pp. 146-150.
- P. Niedermayer et al., “First implementation of RF-KO slow extraction at COSY”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR34, pp. 3568-3570.
- V. A. Isaev, N. Claesson, M. Plesko, and K. Zagar, “EPICS Data Acquisition Device Support”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC059, pp. 707-709.
- G. Cavallari, I. Gorine, D. G??sewell, and R. Stierlin, “Pressure Protection Against Vacuum Failures on the Cryostats for LEP SC Cavities”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G28, pp. XX-XX.
- H. Braun, E. Boggasch, D. H. H. Hoffmann, and A. Tauschwitz, “Application of Plasma Lenses in Positron Sources”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1650-1653.
- P. Bambade et al., “In Vacuum High Accuracy Mechanical Positioning System of Nano Resolution Beam Position Monitor at the Interaction Point of ATF2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOCB203, pp. 1149-1151.
Back to search