Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. B. Wilson, T. Raubenheimer, and R. D. Ruth, “RF System for a 30 GHz, 5 TeV Linear Collider Based on Conventional Technology”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W017, pp. 605-607.
[n] Y. J. Lee, J. Montross, J. Mach, and T. Muth, “Diffusion bonding of tungsten-vanadium-zirconium using vacuum hot pressing for the development of a low decay heat cladding solution for tungsten spallation targets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3837-3840. doi:10.18429/JACoW-IPAC2024-THPS44
[n] J. Sauza-Bedolla, S. Atieh, and N. Catalan-Lasheras, “Manufacturing of X-band Accelerating Structures: Metrology Analysis and Process Capability”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 374-376. doi:10.18429/JACoW-LINAC2018-TUPO022
[n] G. G. Karady and H. A. Thiessen, “New Energy Replacement Method for Resonant Power Supplies”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1919-1922.
[n] A. Denker et al., “Status of the HZB# Cyclotron: Eye Tumour Therapy in Berlin”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP015, pp. 75-77.
[n] T. Ishibashi, T. Hattori, N. Hayashizaki, and L. Liang, “Acceleration Test of Two-Beam Type IH-RFQ Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC057, pp. 4185-4187.
[n] C. Yao et al., “Preliminary Test Results of a Prototype Fast Kicker for APS MBA Upgrade”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 950-952. doi:10.18429/JACoW-NAPAC2016-WEPOB24
[n] W. P. Leemans, “Survey Talk - New Laser and Optical Radiation Diagnostics”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1001, pp. 669-673.
[n] H. Park, S. U. De Silva, and J. R. Delayen, “Investigation of the Surface Resistance of Niobium Between 325 MHz and 1300 MHz Using a Coaxial Half-wave Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 395-397. doi:10.18429/JACoW-LINAC2018-TUPO031
[n] O. Lishilin et al., “Overview and Prospects of Plasma Wakefield Acceleration Experiments at PITZ”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3612-3615. doi:10.18429/JACoW-IPAC2019-THPGW016
[n] D. Einfeld, A. Kruessel, and H. Tyrroff, “Design of the Magnets for the Synchrotron Light Source ROSY”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2217-2220.
[n] S. Caspi, M. Helm, and L. J. Laslett, “Numerical Solution of Boundary Condition to Poisson's Equation and its Incorporation into the Program POISSON”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3722-3725.
[n] H. Matsumoto, M. Yoshioka, N. Holtkamp, and J. S. Oh, “Design Study of Cooling Water System for a Large Scale Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W009, pp. 581-583.
[n] M. Nakao et al., “Extraction System of Upgraded AVF Cyclotron of RCNP”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1993-1996. doi:10.18429/JACoW-IPAC2019-TUPTS028
[n] D. Hoff and W. Staples, “NSNS RFQ Mechanical Design”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W026, pp. 1096-1098.
[n] F. Schlander et al., “A New Cleanroom With Facilities for Cleaning and Assembly of Superconducting Cavities at Helmholtz-Institut Mainz”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB015, pp. 575-577.
[n] Y. K. Chen, H. T. Jing, C. Meng, Y. P. Song, J. Y. Tang, and G. Zhao, “Proton Beam Steering for the Experimental Muon Source at CSNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 193-195. doi:10.18429/JACoW-IPAC2019-MOPGW046
[n] E. Hemsing, A. Gover, and J. B. Rosenzweig, “A Virtual Dielectric Eigenmode Expansion of High-Gain FEL Radiation for Study of Paraxial Wave Mode Coupling”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOCAU01, pp. 167-171.
[n] S. Machida, M. Yoshii, Y. Mori, N. Tokuda, and Y. Ishi, “Design Study of AntiProton Accumulation and Deceleration Ring in the KEK PS Complex”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP04, pp. 360-362.
[n] J. R. Adney, D. B. Cline, D. J. Larson, F. E. Mills, and M. L. Sundquist, “Progress Report on Construction and Testing of a 3 MeV, dc, Ampere Intensity Electron Beam Recirculation System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1841-1844.
[n] G. Nicholls, J. Bridges, J. Cook, and R. Kustom, “Status Report on the Radio Frequency Accelerating Systems of the APS at Argonne”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 217-220.
[n] J. G. Patton, T. A. Pelaia, and J. Galambos, “SCORE -- A Save, Compare, and Restore Application for Snapshotting Machine Settings”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB23, pp. 656-658.
[n] B. Leon, “A New Technique for Wiring SSC Sextupole Superconducting Corrector Coils”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3737-3740.
[n] Y. P. Song, Y. Bao, Y. K. Chen, H. T. Jing, C. Meng, and J. Y. Tang, “Decay Muon Beamline Design for EMuS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3670-3672. doi:10.18429/JACoW-IPAC2019-THPGW040
[n] X. R. Hao, “HOMs Extraction Structure Design for HEPS 166.6 MHz Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 403-407. doi:10.18429/JACoW-SRF2019-TUP008
[n] A. Denker, “APPLICATIONS OF HIGH-ENERGY IONS IN MATERIALS SCIENCE”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19B3, pp. XX-XX.
[n] G. Nicholls, “200 KW Amplifier Utilizing Four U.H.F. TV Klystrons”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 255-257.
[n] L. Serafini and C. Pagani, “ITACA: A New Computer Code for the Integration of Transient Particle and Field Equations in Axi-Symmetrical Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 866-869.
[n] Y. M. Park et al., “Development of SC Bus-Line for The KSTAR Superconducting Magnet”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU475, pp. 491-493.
[n] H. Li et al., “Beam Optics Design on a New Injection Scheme for the University of Maryland Electron Ring (UMER)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB027, pp. 1676-1678.
For LaTeX
Use Complete Form
For BibTeX
References
- P. B. Wilson, T. Raubenheimer, and R. D. Ruth, “RF System for a 30 GHz, 5 TeV Linear Collider Based on Conventional Technology”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W017, pp. 605-607.
- Y. J. Lee, J. Montross, J. Mach, and T. Muth, “Diffusion bonding of tungsten-vanadium-zirconium using vacuum hot pressing for the development of a low decay heat cladding solution for tungsten spallation targets”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS44, pp. 3837-3840.
- J. Sauza-Bedolla, S. Atieh, and N. Catalan-Lasheras, “Manufacturing of X-band Accelerating Structures: Metrology Analysis and Process Capability”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 374-376.
- G. G. Karady and H. A. Thiessen, “New Energy Replacement Method for Resonant Power Supplies”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1919-1922.
- A. Denker et al., “Status of the HZB# Cyclotron: Eye Tumour Therapy in Berlin”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP015, pp. 75-77.
- T. Ishibashi, T. Hattori, N. Hayashizaki, and L. Liang, “Acceleration Test of Two-Beam Type IH-RFQ Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC057, pp. 4185-4187.
- C. Yao et al., “Preliminary Test Results of a Prototype Fast Kicker for APS MBA Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 950-952.
- W. P. Leemans, “Survey Talk - New Laser and Optical Radiation Diagnostics”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1001, pp. 669-673.
- H. Park, S. U. De Silva, and J. R. Delayen, “Investigation of the Surface Resistance of Niobium Between 325 MHz and 1300 MHz Using a Coaxial Half-wave Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 395-397.
- O. Lishilin et al., “Overview and Prospects of Plasma Wakefield Acceleration Experiments at PITZ”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3612-3615.
- D. Einfeld, A. Kruessel, and H. Tyrroff, “Design of the Magnets for the Synchrotron Light Source ROSY”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2217-2220.
- S. Caspi, M. Helm, and L. J. Laslett, “Numerical Solution of Boundary Condition to Poisson's Equation and its Incorporation into the Program POISSON”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3722-3725.
- H. Matsumoto, M. Yoshioka, N. Holtkamp, and J. S. Oh, “Design Study of Cooling Water System for a Large Scale Linear Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W009, pp. 581-583.
- M. Nakao et al., “Extraction System of Upgraded AVF Cyclotron of RCNP”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1993-1996.
- D. Hoff and W. Staples, “NSNS RFQ Mechanical Design”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W026, pp. 1096-1098.
- F. Schlander et al., “A New Cleanroom With Facilities for Cleaning and Assembly of Superconducting Cavities at Helmholtz-Institut Mainz”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB015, pp. 575-577.
- Y. K. Chen, H. T. Jing, C. Meng, Y. P. Song, J. Y. Tang, and G. Zhao, “Proton Beam Steering for the Experimental Muon Source at CSNS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 193-195.
- E. Hemsing, A. Gover, and J. B. Rosenzweig, “A Virtual Dielectric Eigenmode Expansion of High-Gain FEL Radiation for Study of Paraxial Wave Mode Coupling”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOCAU01, pp. 167-171.
- S. Machida, M. Yoshii, Y. Mori, N. Tokuda, and Y. Ishi, “Design Study of AntiProton Accumulation and Deceleration Ring in the KEK PS Complex”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAP04, pp. 360-362.
- J. R. Adney, D. B. Cline, D. J. Larson, F. E. Mills, and M. L. Sundquist, “Progress Report on Construction and Testing of a 3 MeV, dc, Ampere Intensity Electron Beam Recirculation System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1841-1844.
- G. Nicholls, J. Bridges, J. Cook, and R. Kustom, “Status Report on the Radio Frequency Accelerating Systems of the APS at Argonne”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 217-220.
- J. G. Patton, T. A. Pelaia, and J. Galambos, “SCORE -- A Save, Compare, and Restore Application for Snapshotting Machine Settings”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB23, pp. 656-658.
- B. Leon, “A New Technique for Wiring SSC Sextupole Superconducting Corrector Coils”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3737-3740.
- Y. P. Song, Y. Bao, Y. K. Chen, H. T. Jing, C. Meng, and J. Y. Tang, “Decay Muon Beamline Design for EMuS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3670-3672.
- X. R. Hao, “HOMs Extraction Structure Design for HEPS 166.6 MHz Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 403-407.
- A. Denker, “APPLICATIONS OF HIGH-ENERGY IONS IN MATERIALS SCIENCE”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19B3, pp. XX-XX.
- G. Nicholls, “200 KW Amplifier Utilizing Four U.H.F. TV Klystrons”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 255-257.
- L. Serafini and C. Pagani, “ITACA: A New Computer Code for the Integration of Transient Particle and Field Equations in Axi-Symmetrical Cavities”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 866-869.
- Y. M. Park et al., “Development of SC Bus-Line for The KSTAR Superconducting Magnet”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU475, pp. 491-493.
- H. Li et al., “Beam Optics Design on a New Injection Scheme for the University of Maryland Electron Ring (UMER)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB027, pp. 1676-1678.
Back to search