Favourites
For Word
[n] M. J. Lee, W. J. Corbett, and J. Wu, “A New Model-Independent Method for Optimization of Machine Settings and Electron Beam Parameters”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC023, pp. 308-310.
[n] A. Ueno and Y. Yamazaki, “RF Field Measurement of a Four-Vane Type RFQ with PISLs”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-38, pp. 713-715.
[n] V. Zvyagintsev et al., “Nine-cell Elliptical Cavity Development at TRIUMF”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO020, pp. 107-109.
[n] G. Y. Kurkin et al., “New RF System for VEPP-5 Damping Ring”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 113-115. doi:10.18429/JACoW-RUPAC2018-THCDMH05
[n] N. Nakamura, R. Hajima, K. Harada, Y. Kobayashi, S. Sakanaka, and M. Shimada, “Effects of Alignment Error of Main Superconducting Cavities on ERLs and their Correction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE083, pp. 2314-2316.
[n] S. Seletskiy and P. Tenenbaum, “The Optimized Bunch Compressor for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOAAB02, pp. 1958-1960.
[n] W. J. Corbett, W. X. Cheng, A. S. Fisher, and X. Huang, “Bunch Length and Impedance Measurements at SPEAR3”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP028, pp. 1595-1597.
[n] P. Yu et al., “Lorentz boosted frame simulation of Laser wakefield acceleration using hybrid Yee-fft solver in quasi-3d geometry”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 691-693. doi:10.18429/JACoW-IPAC2015-MOPMA059
[n] M. Braeuer, U. Hahn, and S. Toleikis, “A Mechanical Shutter to Select Single Bunch Trains at the FLASH Facility at DESY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH064, pp. 470-473.
[n] N. Voumard, C. Boucly, M. P. Pimentel, P. Van Trappen, and L. Strobino, “Use of Multi-Network Fieldbus for Integration of Low-Level Intelligent Controller Within Control Architecture of Fast Pulsed System at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 590. doi:10.18429/JACoW-ICALEPCS2019-MOPHA152
[n] K. Togawa et al., “Production of High Intensity Polarized Electron Beam with Multi-Bunch Structure”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D054, pp. 214-216.
[n] M. Canzari et al., “A Technology Downselection for SKA User Interface Generator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1006. doi:10.18429/JACoW-ICALEPCS2019-WEMPL005
[n] K. P. Wootton et al., “Design of the X-Ray Beam Size Monitor for the Advanced Photon Source Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 956-959. doi:10.18429/JACoW-IPAC2021-MOPAB303
[n] D. Dunning et al., “Conclusions from the UK XFEL conceptual design and options analysis study”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB042, unpublished.
[n] U. Schryber et al., “Status Report on the New Injector at SIN”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABI-05, pp. 43-53.
[n] J.-F. Ostiguy, M. Kriss, M. McCusker-Whiting, and L. Michelotti, “The Fermilab Lattice Information Repository”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT007, pp. 1066-1068.
[n] D. M. Evans, J. R. Guggemos, R. L. Kilgore, and D. J. Rondeau, “Advancements in Control Technology at the Bevatron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 561-564.
For LaTeX
Use Complete Form
For BibTeX
References
- M. J. Lee, W. J. Corbett, and J. Wu, “A New Model-Independent Method for Optimization of Machine Settings and Electron Beam Parameters”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC023, pp. 308-310.
- A. Ueno and Y. Yamazaki, “RF Field Measurement of a Four-Vane Type RFQ with PISLs”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-38, pp. 713-715.
- V. Zvyagintsev et al., “Nine-cell Elliptical Cavity Development at TRIUMF”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO020, pp. 107-109.
- G. Y. Kurkin et al., “New RF System for VEPP-5 Damping Ring”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 113-115.
- N. Nakamura, R. Hajima, K. Harada, Y. Kobayashi, S. Sakanaka, and M. Shimada, “Effects of Alignment Error of Main Superconducting Cavities on ERLs and their Correction”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE083, pp. 2314-2316.
- S. Seletskiy and P. Tenenbaum, “The Optimized Bunch Compressor for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOAAB02, pp. 1958-1960.
- W. J. Corbett, W. X. Cheng, A. S. Fisher, and X. Huang, “Bunch Length and Impedance Measurements at SPEAR3”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP028, pp. 1595-1597.
- P. Yu et al., “Lorentz boosted frame simulation of Laser wakefield acceleration using hybrid Yee-fft solver in quasi-3d geometry”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 691-693.
- M. Braeuer, U. Hahn, and S. Toleikis, “A Mechanical Shutter to Select Single Bunch Trains at the FLASH Facility at DESY”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH064, pp. 470-473.
- N. Voumard, C. Boucly, M. P. Pimentel, P. Van Trappen, and L. Strobino, “Use of Multi-Network Fieldbus for Integration of Low-Level Intelligent Controller Within Control Architecture of Fast Pulsed System at CERN”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 590.
- K. Togawa et al., “Production of High Intensity Polarized Electron Beam with Multi-Bunch Structure”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D054, pp. 214-216.
- M. Canzari et al., “A Technology Downselection for SKA User Interface Generator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1006.
- K. P. Wootton et al., “Design of the X-Ray Beam Size Monitor for the Advanced Photon Source Upgrade”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 956-959.
- D. Dunning et al., “Conclusions from the UK XFEL conceptual design and options analysis study”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB042, this conference.
- U. Schryber et al., “Status Report on the New Injector at SIN”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABI-05, pp. 43-53.
- J.-F. Ostiguy, M. Kriss, M. McCusker-Whiting, and L. Michelotti, “The Fermilab Lattice Information Repository”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT007, pp. 1066-1068.
- D. M. Evans, J. R. Guggemos, R. L. Kilgore, and D. J. Rondeau, “Advancements in Control Technology at the Bevatron”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 561-564.
Back to search
