Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Fuchsberger, J. C. Garnier, A. A. Gorzawski, and E. Motesnitsalis, “Concept and Prototype for a Distributed Analysis Framework for the LHC Machine Data”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC026, pp. 604-607.
[n] D. Alesini et al., “Design, Fabrication and High Power RF Test of a C-band Accelerating Structure for Feasibility Study of the SPARC Photo-injector Energy Upgrade”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC013, pp. 89-91.
[n] K. I. Blomqvist, P. Elleaume, C. Limborg, Y. Nosochkov, J. Safranek, and A. Terebilo, “Nonlinear Dynamics in SPEAR Wigglers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUODF103, pp. 295-297.
[n] M. Malard, S. Gustafsson, L. Hablot, J. P. Schapira, and A. Serafini, “AGOR Axial Injection, Using a Positive Light Ion Multicusp Source”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F1-04, pp. 182-185.
[n] C. Gaspar et al., “The LHCb Experiment Control System: on the Path to Full Automation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST06, pp. 20-23.
[n] Q. S. Shu et al., “Innovative Modular, Multiple Power Levels, 325 MHz Spokes Cavities Power Couplers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS057, pp. 2475-2477.
[n] D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
[n] J. S. Kolski, R. J. Macek, and T. Spickermann, “Coherent Space Charge Tune Shift Measurements in the Los Alamos Proton Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC20, pp. 493-495.
[n] H. Ikeda, H. Fukuma, T. Mitsuhashi, G. Mitsuka, and M. Tobiyama, “Beam size measurement at SBL in SuperKEKB”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 467-471. doi:10.18429/JACoW-IBIC2025-TUPMO07
[n] N. Eddy et al., “High Resolution BPM Upgrade for the ATF Damping Ring at KEK”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD11, pp. 59-61.
[n] I. Mohos, J. Bojowald, J. Dietrich, and F. Klehr Forschungszentrum J??lich GmbH, “New Schottky-Pickup for COSY-J??lich”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS07, pp. XX-XX.
[n] Y. Sheng, L. X. Liu, X. Xia, and J. Q. Xu, “Radiation Dose Simulation and Measurement plan for SSRF Beam Lines by Using ATOM Phantoms”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR022, pp. 4008-4010.
[n] V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
[n] D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1536-1539.
[n] J. R. Harris et al., “Longitudinal Dynamics in the University of Maryland Electron Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPC010, pp. 713-715.
[n] D. F. Marcks and R. B. Wehrle, “Extracted and Secondary Beam Targetry”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 887-895.
[n] B. L. Beaudoin et al., “Application of Induction Module for Energy Perturbations in the University of Maryland Electron Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS001, pp. 2322-2324.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Fuchsberger, J. C. Garnier, A. A. Gorzawski, and E. Motesnitsalis, “Concept and Prototype for a Distributed Analysis Framework for the LHC Machine Data”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC026, pp. 604-607.
- D. Alesini et al., “Design, Fabrication and High Power RF Test of a C-band Accelerating Structure for Feasibility Study of the SPARC Photo-injector Energy Upgrade”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC013, pp. 89-91.
- K. I. Blomqvist, P. Elleaume, C. Limborg, Y. Nosochkov, J. Safranek, and A. Terebilo, “Nonlinear Dynamics in SPEAR Wigglers”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUODF103, pp. 295-297.
- M. Malard, S. Gustafsson, L. Hablot, J. P. Schapira, and A. Serafini, “AGOR Axial Injection, Using a Positive Light Ion Multicusp Source”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F1-04, pp. 182-185.
- C. Gaspar et al., “The LHCb Experiment Control System: on the Path to Full Automation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOBAUST06, pp. 20-23.
- Q. S. Shu et al., “Innovative Modular, Multiple Power Levels, 325 MHz Spokes Cavities Power Couplers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS057, pp. 2475-2477.
- D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
- J. S. Kolski, R. J. Macek, and T. Spickermann, “Coherent Space Charge Tune Shift Measurements in the Los Alamos Proton Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC20, pp. 493-495.
- H. Ikeda, H. Fukuma, T. Mitsuhashi, G. Mitsuka, and M. Tobiyama, “Beam size measurement at SBL in SuperKEKB”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 467-471.
- N. Eddy et al., “High Resolution BPM Upgrade for the ATF Damping Ring at KEK”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD11, pp. 59-61.
- I. Mohos, J. Bojowald, J. Dietrich, and F. Klehr Forschungszentrum J??lich GmbH, “New Schottky-Pickup for COSY-J??lich”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS07, pp. XX-XX.
- Y. Sheng, L. X. Liu, X. Xia, and J. Q. Xu, “Radiation Dose Simulation and Measurement plan for SSRF Beam Lines by Using ATOM Phantoms”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR022, pp. 4008-4010.
- V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
- D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1536-1539.
- J. R. Harris et al., “Longitudinal Dynamics in the University of Maryland Electron Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPC010, pp. 713-715.
- D. F. Marcks and R. B. Wehrle, “Extracted and Secondary Beam Targetry”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 887-895.
- B. L. Beaudoin et al., “Application of Induction Module for Energy Perturbations in the University of Maryland Electron Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS001, pp. 2322-2324.
Back to search