JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. Dimopoulou et al., “Experimental Demonstration of Longitudinal Ion Beam Accumulation with Electron Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP048, pp. 3470-3472. 
[n]	J. Sikora et al., “Further Development of the Stony Brook Superconducting Heavy-Ion Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1878-1881. 
[n]	I. Yamada, “Progress on gas-sheet beam profile monitor”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 471-475. doi:10.18429/JACoW-IBIC2025-TUPMO08
[n]	A. F. D. Morgan and G. Rehm, “Initial Work on the Design of a Longitudinal Bunch-by-Bunch Feedback Kicker at Diamond”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 197-201. doi:10.18429/JACoW-IBIC2015-MOPB064
[n]	P. Gagliardi, V. Sciutto, F. Terzi, and G. Zoni, “Manufacturing Experience at Ansaldo in Large Scale Production of Superconducting Cavities for LEP-2 Project”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D30, pp. 1081-1089. 
[n]	J. X. Zhang, X. J. Bian, F. S. Chen, J. Cheng, and F. Long, “Study of Digital Quench Detection System Based on System-on-Chip Technology”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3549-3551. doi:10.18429/JACoW-IPAC2016-THPMW008
[n]	H. Jiang, J. Pan, L. Lai, S. Wang, Y. Zhou, and Y. Han, “Current Development Status of Beam Diagnostics Electronics at SSRF”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper MOPMO23, unpublished. 
[n]	J. Smedley et al., “QE Measurements of a Nb-Pb SRF Photoinjector”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 11, pp. 95-98. 
[n]	S. H. Nam, S. H. Jeong, and I. S. Ko, “Operating Characteristics of the PLS Injection Kicker Modulator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D076, pp. 588-592. 
[n]	J. Liu et al., “High-Power Test of a Compact X-Band RF Rotary Joint”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4017-4019. doi:10.18429/JACoW-IPAC2018-THPAL156
[n]	A. Mapar, F. Pourboghrat, T. R. Bieler, and C. Compton, “Dynamic Hardening Rule; a Generalization of the Classical Hardening Rule for Crystal Plasticity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP037, pp. 499-503. 
[n]	M. H. Bussmann et al., “All-Optical Ion Beam Cooling and Online Diagnostics at Relativistic Energies”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOA1MCIO01, pp. 22-26. 
[n]	J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Recent Developments of Insertion Devices at the ESRF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA20, pp. 2662-2664. 
[n]	T. Kawakubo, S. Murasugi, E. Nakamura, and S. Tazawa, “Fast-Extraction Kicker-Magnet System for the KEK-PS Main Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D074, pp. 582-584. 
[n]	O. A. Tarvainen, R. Keller, and G. Rouleau, “Helicon Plasma Generator-assisted H- Ion Source Development at Los Alamos Neutron Science Center”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS064, pp. 1802-1804. 
[n]	N/A, “N/A”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO4IODN02, pp. XX-XX. 
[n]	J. Casey, M. P. J. Gaudreau, M. A. Kempkes, and J. M. Mulvaney, “Solid-State High Voltage Pulse Modulators for High Power Microwave Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A07, pp. 2361-2363. 
[n]	J. M. Filhol and U. Weinrich, “Mastering Beam Losses and Ageing Issues at the ESRF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP30, pp. 2331-2333. 
[n]	P. M. McIntyre, N. Pogue, R. Romero, and A. Sattarov, “Polyhedral Cavity Structure for Linac Colliders”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS002, pp. 2325-2327. 
[n]	A. Fisher et al., “Lessons learned in commissioning the new beam-loss monitors for the superconducting upgrade to LCLS”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 593-598. doi:10.18429/JACoW-IBIC2025-WEBC02
[n]	M. Mwaniki et al., “Design of ionization profile monitors at the Integrable Optics Test Accelerator (IOTA) Facility at Fermilab”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6357, unpublished. 
[n]	B. Mustapha and P. N. Ostroumov, “Optimization Algorithms for Accelerator Physics Problems”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper FR1IOPK01, pp. 245-250. 
[n]	N. La Rosa et al., “Development and experimental validation of a PI control system for synchrotron X-Ray beam stabilization”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper TUPCO33, unpublished. 
[n]	W. H. Hwang, J. Choi, Y. J. Han, J. Y. Huang, H.-G. Kim, and W. W. Lee, “Preliminary RF Test in PLS 2.5GeV Linac for PAL-XFEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP045, pp. XX-XX. 
[n]	I. N. Draganic, J. F. O, and L. Rybarcyk, “Lifetime Study of Tungsten Filaments in an H- Surface Convertor Ion Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC23, pp. 1190-1192. 
[n]	Y. Han et al., “Beam diagnostic signal processor for SHINE”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 227-231. doi:10.18429/JACoW-IBIC2025-MOPMO21
[n]	K. Sakaue, A. Endo, and M. Washio, “Design of High Brightness Light Source based on Laser-Compton Undulator for EUV Lithography Mask Inspection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA036, pp. 148-150. 
[n]	A. Endo, K. Sakaue, M. Washio, and H. Mizoguchi, “Optimization of High Average Power FEL Beam for EUV Lithography Application”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper FRA04, pp. 990-992. 
[n]	J. Xu, B. Mustapha, J. A. Nolen, and P. N. Ostroumov, “Highly Scalable Numerical Methods for Simulation of Space Charge Dominated Beams”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO4IOPK02, pp. 12-17. 
[n]	A. M. Koehler, “Medical Treatment and Diagnosis Using 160 MeV Protons (Invited Paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 586-603. 
[n]	L. Eidam, O. Boine-Frankenheim, and D. F. A. Winters, “Simulation of Laser Cooling of Heavy Ion Beams at High Intensities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 150-152. doi:10.18429/JACoW-IPAC2015-MOPWA025
[n]	J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Recent Developments of Insertion Devices at ESRF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P026, pp. 3506-3508. 
[n]	G. M. Wang et al., “Energy Recovery Transport Design for Peking University FEL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN119, pp. 1191-1193. 
[n]	A. Chmielinska, M. J. Barnes, F. Caspers, B. K. Popovic, and C. Vollinger, “Measurements of Electromagnetic Properties of Ferrites as a Function of Frequency and Temperature”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2592-2595. doi:10.18429/JACoW-IPAC2018-WEPMF089
[n]	H. Zhang, J. Grillenberger, and M. Seidel, “Beam Optics Considerations for Isotope Production at the PSI Cyclotron Facility”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 95-97. doi:10.18429/JACoW-Cyclotrons2016-MOP16
[n]	M. V. Vysotskyy and V. I. Vysotskii, “Non-Linear Parametric Effects and Beam Collapse at Motion of Accelerated Particles in Transversal Focusing Fields”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE086, pp. 4725-4727. 
[n]	Y. Aoki et al., “Experimental Results of a Photocathode RF Gun driven by a Stabilized All-Solid ps Laser”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A14, pp. 1678-1680. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search