Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Sertore et al., “Basis for the Reliability Analysis of the Proton Linac for an ADS Program”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG034, pp. 1506-1508.
[n] M. Ferrario, J. Sekutowicz, and Ch. Tang, “Superconducting Superstructure for the TESLA Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP46C, pp. 1876-1878.
[n] H. Suk, C. Kim, G. H. Kim, J. U. Kim, and H. J. Lee, “Electron Acceleration by Laser Wakefields in Tapered Plasma Densities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG049, pp. 1912-1914.
[n] D. S. Hung, C. I. Chen, C. H. Kuo, and Y. C. Lo, “Electron Beam Motion Observed in Infrared Synchrotron Radiation at NSRRC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG028, pp. 3234-3236.
[n] K. W. Seo, A. H. Maeng, S. C. Lee, and I. S. Ko, “Precision Surveying and Smoothing Analysis for Pohang Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P069, pp. 3663-3665.
[n] W. H. C. Theuws, J. I. M. Botman, H. L. Hagedoorn, and A. F. J. Hammen, “Tuning Possibilities of the Longitudinal Beam Shape of a Racetrack Microtron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA102, pp. 2825-2827.
[n] A. Jason, B. Blind, and E. Svaton, “Uniform Ribbon-Beam Generation for Accelerator Production of Tritium”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-58, pp. 192-195.
[n] V. L. Auslender et al., “TRIODE RF GUN FOR LINEAR ELECTRON ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP28, pp. XX-XX.
[n] L. M. Earley, J. M. Potter, and A. J. Thomas, “Tuning Experience with FMIT Scale-Model Drift-Tube Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B14, pp. 74-76.
[n] V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13.
[n] R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2790-2793.
[n] E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
[n] E. R. Gray and G. Spalek, “Power Coupler and Cold Window for Seven-Cell Superconducting Cavity Vertical Test”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-49, pp. 450-452.
[n] C. Pagani et al., “Status of the High Energy SC Linac for the TRASCO Program”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH304, pp. 3612-3614.
[n] S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
[n] J. C. Smith, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Construction and Bench Testing of a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB078, pp. 1701-1703.
[n] K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2203-2205. doi:10.18429/JACoW-IPAC2018-WEPAL022
[n] Q. A. Kerns, J. E. Katz, and G. S. Tool, “Ferrite Measurements for Synchrotron RF Accelerating System Design”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 185-191.
[n] J. Hoover, S. Orr, J. Ryk, and A. T. Visser, “Power for the FermilabTevatron Helium Liquefier”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3938-3941.
[n] L. Burnod and E. D, “New Methods to Correct On-Line the Closed Orbit of a Synchrotron Accelerator with Variable Focusing Configuration”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2284-2287.
[n] J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 304-308. doi:10.18429/JACoW-MEDSI2016-WECA07
[n] D. Cook, J. Clare, J. S. Przybyla, and P. W. Wheeler, “Design of A Direct Power Converter for High Power RF Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN083, pp. 2221-2223.
[n] J. Shi, L. Jin, D. Wang, and F. Wang, “Beam-Beam Effects in the Ring-Ring Version of eRHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP017, pp. 1520-1522.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Sertore et al., “Basis for the Reliability Analysis of the Proton Linac for an ADS Program”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG034, pp. 1506-1508.
- M. Ferrario, J. Sekutowicz, and Ch. Tang, “Superconducting Superstructure for the TESLA Collider”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP46C, pp. 1876-1878.
- H. Suk, C. Kim, G. H. Kim, J. U. Kim, and H. J. Lee, “Electron Acceleration by Laser Wakefields in Tapered Plasma Densities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG049, pp. 1912-1914.
- D. S. Hung, C. I. Chen, C. H. Kuo, and Y. C. Lo, “Electron Beam Motion Observed in Infrared Synchrotron Radiation at NSRRC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG028, pp. 3234-3236.
- K. W. Seo, A. H. Maeng, S. C. Lee, and I. S. Ko, “Precision Surveying and Smoothing Analysis for Pohang Light Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P069, pp. 3663-3665.
- W. H. C. Theuws, J. I. M. Botman, H. L. Hagedoorn, and A. F. J. Hammen, “Tuning Possibilities of the Longitudinal Beam Shape of a Racetrack Microtron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA102, pp. 2825-2827.
- A. Jason, B. Blind, and E. Svaton, “Uniform Ribbon-Beam Generation for Accelerator Production of Tritium”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-58, pp. 192-195.
- V. L. Auslender et al., “TRIODE RF GUN FOR LINEAR ELECTRON ACCELERATORS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP28, pp. XX-XX.
- L. M. Earley, J. M. Potter, and A. J. Thomas, “Tuning Experience with FMIT Scale-Model Drift-Tube Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B14, pp. 74-76.
- V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13.
- R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2790-2793.
- E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
- E. R. Gray and G. Spalek, “Power Coupler and Cold Window for Seven-Cell Superconducting Cavity Vertical Test”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-49, pp. 450-452.
- C. Pagani et al., “Status of the High Energy SC Linac for the TRASCO Program”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH304, pp. 3612-3614.
- S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
- J. C. Smith, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Construction and Bench Testing of a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB078, pp. 1701-1703.
- K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2203-2205.
- Q. A. Kerns, J. E. Katz, and G. S. Tool, “Ferrite Measurements for Synchrotron RF Accelerating System Design”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 185-191.
- J. Hoover, S. Orr, J. Ryk, and A. T. Visser, “Power for the FermilabTevatron Helium Liquefier”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3938-3941.
- L. Burnod and E. D, “New Methods to Correct On-Line the Closed Orbit of a Synchrotron Accelerator with Variable Focusing Configuration”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2284-2287.
- J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 304-308.
- D. Cook, J. Clare, J. S. Przybyla, and P. W. Wheeler, “Design of A Direct Power Converter for High Power RF Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN083, pp. 2221-2223.
- J. Shi, L. Jin, D. Wang, and F. Wang, “Beam-Beam Effects in the Ring-Ring Version of eRHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP017, pp. 1520-1522.
Back to search