Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Kain et al., “Changes to the Transfer Line Collimation System for the High-Luminosity LHC Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2124-2127. doi:10.18429/JACoW-IPAC2015-TUPTY048
[n] S. Hojo et al., “Improvement of the NIRS-930 Cyclotron for Targeted Radionuclide Therapy”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 328-331. doi:10.18429/JACoW-Cyclotrons2016-THP11
[n] M. Aslaninejad, M. J. Easton, J. Pasternak, K. J. Peach, J. K. Pozimski, and T. Yokoi, “Injection of Proton and Carbon 6+ into the Non-scaling FFAG”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB033, pp. 3957-3959.
[n] X. Zhao, G. Ciovati, C. E. Reece, and A. T. Wu, “Surface Topography of Hotspot" Regions from a Single Cell SRF Cavity"”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP062, pp. 2147-2149.
[n] S. G. Anderson et al., “An Optimized X-band Photoinjector Design for the LLNL MEGa-Ray Project”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP128, pp. 334-336.
[n] D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314.
[n] K. F. Johnson et al., “Commissioning of the Low-Energy Demonstration Accelerator (LEDA) Radio-Frequency Quadrupole (RFQ)”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA62, pp. 3528-3530.
[n] L. M. Sevryukova, A. I. Ageev, V. V. Alimov, and O. A. Voinalovich, “Development of Production Technology for Weldless Copper Shells of SC Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I27, pp. XX-XX.
[n] R. Xiang, A. Arnold, P. Murcek, J. Schaber, and J. Teichert, “Metal and Semiconductor Photocathodes in HZDR SRF Gun”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 142-144. doi:10.18429/JACoW-ERL2019-THCOYBS01
[n] R. Eichhorn and U. Ratzinger, “Development of a Superconducting H-mode Cavity for the Low-Beta Regime”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP022, pp. 462-464.
[n] K. Honkavaara et al., “Transverse Electron Beam Diagnostics at the VUV-FEL at DESY”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP038, pp. XX-XX.
[n] M. Portillo et al., “An Achromatic Mass Separator Design for Ions from the EBIT Charge Breeder at the NSCL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP015, pp. 4341-4343.
[n] M. Bajko, F. Savary, and W. Scandale, “Geometry and Alignment Requirements for the LHC Main Dipole”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A07, pp. 2160-2162.
[n] J. D. Sherman et al., “Review of Scaled Penning H- Surface Plasma Source with Slit Emitters for High Duty Factor Linacs”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THALA002, pp. 284-286.
[n] P. Savage, M. Aslaninejad, P. A. Posocco, J. K. Pozimski, A. P. Letchford, and S. Mishra, “Thermal Design of the FETS Chopper Beam Dump”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA05, pp. 303-305.
[n] T. Bohl, M. Lamont, T. Linnecar, W. Scandale, and E. Shaposhnikova, “Measurement of the Effect on Single Bunch Stability of Changing Transition Energy in the CERN SPS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP08A, pp. 975-977.
[n] S. J. Park et al., “Status of PPI (Pohang Photo-Injector) for PAL XFEL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP021, pp. 1733-1735.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Kain et al., “Changes to the Transfer Line Collimation System for the High-Luminosity LHC Beams”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2124-2127.
- S. Hojo et al., “Improvement of the NIRS-930 Cyclotron for Targeted Radionuclide Therapy”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 328-331.
- M. Aslaninejad, M. J. Easton, J. Pasternak, K. J. Peach, J. K. Pozimski, and T. Yokoi, “Injection of Proton and Carbon 6+ into the Non-scaling FFAG”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB033, pp. 3957-3959.
- X. Zhao, G. Ciovati, C. E. Reece, and A. T. Wu, “Surface Topography of Hotspot" Regions from a Single Cell SRF Cavity"”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP062, pp. 2147-2149.
- S. G. Anderson et al., “An Optimized X-band Photoinjector Design for the LLNL MEGa-Ray Project”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP128, pp. 334-336.
- D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314.
- K. F. Johnson et al., “Commissioning of the Low-Energy Demonstration Accelerator (LEDA) Radio-Frequency Quadrupole (RFQ)”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA62, pp. 3528-3530.
- L. M. Sevryukova, A. I. Ageev, V. V. Alimov, and O. A. Voinalovich, “Development of Production Technology for Weldless Copper Shells of SC Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I27, pp. XX-XX.
- R. Xiang, A. Arnold, P. Murcek, J. Schaber, and J. Teichert, “Metal and Semiconductor Photocathodes in HZDR SRF Gun”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 142-144.
- R. Eichhorn and U. Ratzinger, “Development of a Superconducting H-mode Cavity for the Low-Beta Regime”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP022, pp. 462-464.
- K. Honkavaara et al., “Transverse Electron Beam Diagnostics at the VUV-FEL at DESY”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP038, pp. XX-XX.
- M. Portillo et al., “An Achromatic Mass Separator Design for Ions from the EBIT Charge Breeder at the NSCL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP015, pp. 4341-4343.
- M. Bajko, F. Savary, and W. Scandale, “Geometry and Alignment Requirements for the LHC Main Dipole”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A07, pp. 2160-2162.
- J. D. Sherman et al., “Review of Scaled Penning H- Surface Plasma Source with Slit Emitters for High Duty Factor Linacs”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THALA002, pp. 284-286.
- P. Savage, M. Aslaninejad, P. A. Posocco, J. K. Pozimski, A. P. Letchford, and S. Mishra, “Thermal Design of the FETS Chopper Beam Dump”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA05, pp. 303-305.
- T. Bohl, M. Lamont, T. Linnecar, W. Scandale, and E. Shaposhnikova, “Measurement of the Effect on Single Bunch Stability of Changing Transition Energy in the CERN SPS”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP08A, pp. 975-977.
- S. J. Park et al., “Status of PPI (Pohang Photo-Injector) for PAL XFEL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP021, pp. 1733-1735.
Back to search