Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Sipahi, S. Biedron, and S. V. Milton, “Co-Linear X-Band Energy Booster (XCEB) Cavity and RF System Details”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3421-3424. doi:10.18429/JACoW-IPAC2015-WEPTY063
[n] H. Hsieh et al., “Superconducting Magnet Program for X-Ray Lithography Source at Brookhaven National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2248-2251.
[n] M. Kuhn et al., “Causes and Solutions for Emittance Blow-Up During the LHC Cycle”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC017, pp. 160-162.
[n] M. Ge et al., “Performance of the Prototype SRF Half-Wave-Resonators Tested at Cornell for the RAON Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2468-2470. doi:10.18429/JACoW-IPAC2018-WEPMF045
[n] M. J. Kim et al., “Design of Analog to Digital Converter Scheme for High - Precision Electromagnet Power supply”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1309-1311. doi:10.18429/JACoW-IPAC2019-TUPMP032
[n] V. S. Lavrik, L. H. J. Bozyk, O. K. Kester, and A. Reiter, “Beam Loss Monitoring Study for SIS100@FAIR”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC46, pp. 485-488.
[n] T. Sipahi, S. Biedron, and S. V. Milton, “Achieving Higher Energies via Passively Driven X-band Structures”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3933-3936. doi:10.18429/JACoW-IPAC2014-THPRI073
[n] F. M?®ot, M. Bajard, B. Laun?®, and A. Tkatchenko, “ETOILE Hadrontherapy Project, Review of Design Studies”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI080, pp. 2745-2747.
[n] C. Zanoni et al., “Engineering Design and Prototype Fabrication of HOM Couplers for HL-LHC Crab Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB069, pp. 1279-1283.
[n] T. Sipahi, S. Biedron, S. V. Milton, J. Hylen, and R. M. Zwaska, “Simulations of High Current NuMI Magnetic Horn Striplines at FNAL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1230-1232. doi:10.18429/JACoW-IPAC2016-TUPMR004
[n] L. C. Deacon et al., “A Spectrometer for Proton Driven Plasma Accelerated Electrons at AWAKE - Recent Developments”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2605-2608. doi:10.18429/JACoW-IPAC2016-WEPMY024
[n] M. J. Joung, H. C. Jung, and H. J. Kim, “The Early Stage of the Cavity Fabrication Process (ECT and furnace) for RAON”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO063, pp. 3901-3902.
[n] O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3161-3164. doi:10.18429/JACoW-IPAC2018-THPAF077
[n] E. Acerbi, G. Bellomo, C. De Martinis, and F. Resmini, “Injection Studies for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1112-1115.
[n] M. A. Valdivia Garc?¡a and F. Zimmermann, “Effect of Beamstrahlung on Bunch Length and Emittance in Future Circular e+e- Colliders”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2438-2441. doi:10.18429/JACoW-IPAC2016-WEPMW010
[n] H. Tang et al., “Experimental Studies of the Charge Limit Phenomenon in NEA GaAs Photocathodes”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 46-49.
[n] A. Potylitsyn, G. Kube, A. I. Novokshonov, and L. G. Sukhikh, “Spatial Resolution Improvement of OTR Monitors by Off-axis Light Collection”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 451-454. doi:10.18429/JACoW-IBIC2018-WEPB11
[n] A. Beckmann, “Automated Verification Environment for TwinCAT PLC Programs”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC082, pp. 288-291.
[n] L. Lilje, “XFEL: plans for 101 cryomodules”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO102, pp. XX-XX.
[n] P. J. M. van der Slot et al., “Real-Time Ellipsometry for Monitoring the Growth of Cesium-Telluride Photocathodes”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH087, pp. 448-451.
[n] J. Chen, Y. B. Leng, and K. R. Ye, “Hartmann Screen and Wavefront Sensor System for Extracting Mirror at SSRF”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB53, pp. 191-193.
[n] F. Carra et al., “Assessment of Thermal Loads in the CERN SPS Crab Cavities Cryomodule”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2047-2050. doi:10.18429/JACoW-IPAC2017-TUPVA008
[n] J.-W. Kim, Y. Choi, S. Hong, and J. H. Kim, “Plan of a 70 MeV H- Cyclotron System for the ISOL Driver in the Rare Isotope Science Project”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT015, pp. 64-66.
[n] J. W. Kim and H. Kim, “Quality Factor Measurement Method Using Multi Decay Time Constants on Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1011-1013. doi:10.18429/JACoW-LINAC2016-THPLR069
[n] O. Chorniy, H. Br?ñuning, T. Hoffmann, H. Reeg, and A. Reiter, “A FESA DAQ for Fast Current Transformer in SIS 18”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF31, pp. 894-896.
[n] M. Scholz, M. Vogt, and J. Zemella, “Beam Optics Measurements at FLASH2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 863-865. doi:10.18429/JACoW-IPAC2015-MOPHA035
[n] O. Payir et al., “Massless Beam Separation System for Intense Ion Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3736-3738. doi:10.18429/JACoW-IPAC2015-THPF023
[n] L. H. Wu, J.-R. Chen, C. M. Cheng, G.-Y. Hsiung, C. S. Huang, and Y. T. Huang, “A Study of Vacuum Pressure in TPS Cells”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD024, pp. 2552-2554.
[n] J. Zemella, T. Hellert, M. Scholz, and M. Vogt, “Measurements of the Optical Functions at FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1141-1143. doi:10.18429/JACoW-IPAC2014-TUPRO050
[n] G. Ambrosio, F. M. Ametrano, F. Broggi, A. Ferrari, and L. Rossi, “Stability of NbSn Low-beta Quadrupole in the LHC Radiation Environment”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP089G, pp. 2293-2295.
[n] M. F. Stroosnijder, “The Application of a Cyclotron in Materials Research at the IAM of the European Commission”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper D-02, pp. 144-147.
[n] K. T. Son, C. O. Choi, H. Jang, H. C. Jung, and D. Y. Lee, “Development of 4-way 81.25 MHz 20 kW High Power Combiner Using Parallel Plate Structure”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 213-215. doi:10.18429/JACoW-SRF2017-MOPB068
[n] G. Benedetti, D. Einfeld, Z. Martí, and M. Munoz, “LOCO in the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC024, pp. 2055-2057.
[n] C. Antoine, J. Gaiffier, H. Chalaye, and J. F. Roche, “Hydroforming at C. E.A. Saclay: First Results”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C20, pp. 598-605.
[n] K. O. Kruchinin et al., “Simulation Results of the FETS Laserwire Emittance Scanner”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3729-3731. doi:10.18429/JACoW-IPAC2014-THPME191
[n] J. Tan, G. Bellodi, A. Feschenko, and S. A. Gavrilov, “Results from the CERN LINAC4 Longitudinal Bunch Shape Monitor”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 415-419. doi:10.18429/JACoW-IBIC2018-WEPA19
[n] M. E. Angoletta et al., “Operational Experience With the New Digital Low-Level RF System for CERN's PS Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4058-4061. doi:10.18429/JACoW-IPAC2017-THPAB143
[n] S. Sharonov and J. M. Nogiec, “An Embedded Power Supply Controller”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P008, pp. 3464-3466.
[n] J. S. Schmidt, B. Koubek, and A. Schempp, “Tuning of the New 4-Rod RFQ for FNAL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS041, pp. 2580-2582.
[n] A. Arteche et al., “Characterisation of Electro-Optic Pickups for High Bandwidth Diagnostics at the High Luminosity LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2690-2693. doi:10.18429/JACoW-IPAC2019-WEPGW088
[n] G. Ambrosio and F. Broggi, “Study of the Power Deposition in the LHC Low-Beta Inner Triplet for a Nb3Sn Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP32G, pp. 1987-1989.
[n] L. R. Prost et al., “PXIE Low Energy Beam Transport Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4013-4015. doi:10.18429/JACoW-IPAC2015-THPF126
[n] M.-H. Chun et al., “Status and Progress of RF System for the PLS-II Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC023, pp. 2254-2256.
[n] R. J. Weggel et al., “Open Midplane Dipoles for a Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP177, pp. 1160-1162.
[n] R. Huang, Q. K. Jia, H. T. Li, and Z. Zhao, “The Preliminary Study of a Pre-Bunched Terahertz Free Electron Laser by a Velocity Bunching Scheme”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 477-480. doi:10.18429/JACoW-FEL2019-WEP063
[n] J. F. Schmerge et al., “In-Situ Cleaning of Metal Photo-Cathodes in RF Guns”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH063, pp. 732-735.
[n] M. O. Hyun et al., “Fabrication and Installation of Newly Designed Cryostats and Top Flanges for the Vertical Test of RISP”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 733. doi:10.18429/JACoW-SRF2021-THPFAV002
[n] C. E. Reece et al., “Design and Construction of the Prototype Cryomodule Renascence for the CEBAF 12 GeV Upgrade”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP38, pp. 131-134.
[n] C. O. Choi, H. Jang, H. C. Jung, D. Y. Lee, and K. T. Son, “Development of 81.25 MHz 20 kW SSPA for RAON Accelerator”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 210-212. doi:10.18429/JACoW-SRF2017-MOPB066
[n] S. Liu, P. Bambade, S. Bai, T. Tauchi, and N. Terunuma, “Development of Diamond Sensors for Beam Halo and Compton Spectrum Diagnostics After The Interaction Point of ATF2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME003, pp. 470-472.
[n] M. Scholz and B. Beutner, “Electron Beam Phase Space Tomography at the European XFEL Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 196-198. doi:10.18429/JACoW-IPAC2017-MOPAB047
[n] G. Kalbfleisch, P. J. Limon, and C. Rode, “Operation of Multiple Superconducting Energy Doubler Magnets in Series”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1239-1242.
[n] J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations on the Boundary Fields of 4-rod RFQ Electrodes”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO020, pp. 3803-3805.
[n] E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 196-199. doi:10.18429/JACoW-IPAC2018-MOPMF043
[n] B. Gao, H. J. Chen, J. Chen, Y. B. Leng, K. R. Ye, and N. Zhang, “Wavefront Distortion Measurement at SSRF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 332-334. doi:10.18429/JACoW-IPAC2017-MOPAB090
[n] C. Benedetti, E. Esarey, W. Leemans, and C. B. Schroeder, “Modeling a 10 GeV Laser-Plasma Accelerator with INF&RNO”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP082, pp. 250-252.
[n] L. Fiscarelli et al., “Measurement of integrated gradient and field quality on the first Q2 magnets for HL-LHC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2847-2850. doi:10.18429/JACoW-IPAC2024-WEPS64
[n] H. Tanaka, T. Hara, H. Kitamura, N. Kumagai, and K. Togawa, “Dark Current Suppression at XFEL/SPring-8 by Using the Chromatic Aberration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP051, pp. 2383-2385.
[n] J. W. Sim et al., “Software for a Database-Controlled Measurement System at the Fermilab Magnet Test Facility”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB06, pp. 2285-2287.
[n] J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations of the Influence of 4-Rod RFQ Elements on its Voltage Distribution”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP038, pp. 3818-3820.
[n] A. Takagi et al., “An Irradiation System for Carbon Stripper Foils with 750 keV H- Beams”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS028, pp. 1550-1552.
[n] P. Balleyguier and F. Simoens, “Simulations vs. Measurements on the IPHI RFQ Cold Model”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO002, pp. 2127-2129.
[n] P. Drumm, “Implementation of MICE at RAL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT105, pp. 779-781.
[n] F. Carra et al., “Mechanical Engineering and Design of Novel Collimators for HL-LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 369-372. doi:10.18429/JACoW-IPAC2014-MOPRO116
[n] T. Sipahi, S. Biedron, and S. V. Milton, “Wakefield Excitation in Power Extraction Cavity (PEC) of Co-linear X-band Energy Booster (CXEB) in Time Domain (T3P) with ACE3P”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 477-479. doi:10.18429/JACoW-IPAC2016-MOPMW035
[n] U. Dorda, M. Benedikt, H. O. Sch?Ânauer, and A. Wastl, “Simulation Studies of Longitudinal RF-noise and Phase Displacement Acceleration as Driving Mechanism for the MedAustron Synchrotron Slow Extraction”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA001, pp. 2501-2503.
[n] E. Quaranta, R. Bruce, and S. Redaelli, “SixTrack Simulation of Off-momentum Cleaning in LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO037, pp. 972-974.
[n] H. Shaker, S. Doebert, R. Leuxe, L. Dassa, and S. Sanaye Hajari, “Sub-harmonic Buncher Design for the CLIC Drive Beam Injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME052, pp. 1685-1687.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Sipahi, S. Biedron, and S. V. Milton, “Co-Linear X-Band Energy Booster (XCEB) Cavity and RF System Details”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3421-3424.
- H. Hsieh et al., “Superconducting Magnet Program for X-Ray Lithography Source at Brookhaven National Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2248-2251.
- M. Kuhn et al., “Causes and Solutions for Emittance Blow-Up During the LHC Cycle”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC017, pp. 160-162.
- M. Ge et al., “Performance of the Prototype SRF Half-Wave-Resonators Tested at Cornell for the RAON Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2468-2470.
- M. J. Kim et al., “Design of Analog to Digital Converter Scheme for High - Precision Electromagnet Power supply”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1309-1311.
- V. S. Lavrik, L. H. J. Bozyk, O. K. Kester, and A. Reiter, “Beam Loss Monitoring Study for SIS100@FAIR”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC46, pp. 485-488.
- T. Sipahi, S. Biedron, and S. V. Milton, “Achieving Higher Energies via Passively Driven X-band Structures”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3933-3936.
- F. M?®ot, M. Bajard, B. Laun?®, and A. Tkatchenko, “ETOILE Hadrontherapy Project, Review of Design Studies”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI080, pp. 2745-2747.
- C. Zanoni et al., “Engineering Design and Prototype Fabrication of HOM Couplers for HL-LHC Crab Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB069, pp. 1279-1283.
- T. Sipahi, S. Biedron, S. V. Milton, J. Hylen, and R. M. Zwaska, “Simulations of High Current NuMI Magnetic Horn Striplines at FNAL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1230-1232.
- L. C. Deacon et al., “A Spectrometer for Proton Driven Plasma Accelerated Electrons at AWAKE - Recent Developments”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2605-2608.
- M. J. Joung, H. C. Jung, and H. J. Kim, “The Early Stage of the Cavity Fabrication Process (ECT and furnace) for RAON”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO063, pp. 3901-3902.
- O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3161-3164.
- E. Acerbi, G. Bellomo, C. De Martinis, and F. Resmini, “Injection Studies for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1112-1115.
- M. A. Valdivia Garc?¡a and F. Zimmermann, “Effect of Beamstrahlung on Bunch Length and Emittance in Future Circular e+e- Colliders”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2438-2441.
- H. Tang et al., “Experimental Studies of the Charge Limit Phenomenon in NEA GaAs Photocathodes”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 46-49.
- A. Potylitsyn, G. Kube, A. I. Novokshonov, and L. G. Sukhikh, “Spatial Resolution Improvement of OTR Monitors by Off-axis Light Collection”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 451-454.
- A. Beckmann, “Automated Verification Environment for TwinCAT PLC Programs”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC082, pp. 288-291.
- L. Lilje, “XFEL: plans for 101 cryomodules”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper MO102, pp. XX-XX.
- P. J. M. van der Slot et al., “Real-Time Ellipsometry for Monitoring the Growth of Cesium-Telluride Photocathodes”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH087, pp. 448-451.
- J. Chen, Y. B. Leng, and K. R. Ye, “Hartmann Screen and Wavefront Sensor System for Extracting Mirror at SSRF”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB53, pp. 191-193.
- F. Carra et al., “Assessment of Thermal Loads in the CERN SPS Crab Cavities Cryomodule”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2047-2050.
- J.-W. Kim, Y. Choi, S. Hong, and J. H. Kim, “Plan of a 70 MeV H- Cyclotron System for the ISOL Driver in the Rare Isotope Science Project”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT015, pp. 64-66.
- J. W. Kim and H. Kim, “Quality Factor Measurement Method Using Multi Decay Time Constants on Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1011-1013.
- O. Chorniy, H. Br?ñuning, T. Hoffmann, H. Reeg, and A. Reiter, “A FESA DAQ for Fast Current Transformer in SIS 18”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF31, pp. 894-896.
- M. Scholz, M. Vogt, and J. Zemella, “Beam Optics Measurements at FLASH2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 863-865.
- O. Payir et al., “Massless Beam Separation System for Intense Ion Beams”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3736-3738.
- L. H. Wu, J.-R. Chen, C. M. Cheng, G.-Y. Hsiung, C. S. Huang, and Y. T. Huang, “A Study of Vacuum Pressure in TPS Cells”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD024, pp. 2552-2554.
- J. Zemella, T. Hellert, M. Scholz, and M. Vogt, “Measurements of the Optical Functions at FLASH”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1141-1143.
- G. Ambrosio, F. M. Ametrano, F. Broggi, A. Ferrari, and L. Rossi, “Stability of NbSn Low-beta Quadrupole in the LHC Radiation Environment”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP089G, pp. 2293-2295.
- M. F. Stroosnijder, “The Application of a Cyclotron in Materials Research at the IAM of the European Commission”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper D-02, pp. 144-147.
- K. T. Son, C. O. Choi, H. Jang, H. C. Jung, and D. Y. Lee, “Development of 4-way 81.25 MHz 20 kW High Power Combiner Using Parallel Plate Structure”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 213-215.
- G. Benedetti, D. Einfeld, Z. Martí, and M. Munoz, “LOCO in the ALBA Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC024, pp. 2055-2057.
- C. Antoine, J. Gaiffier, H. Chalaye, and J. F. Roche, “Hydroforming at C. E.A. Saclay: First Results”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C20, pp. 598-605.
- K. O. Kruchinin et al., “Simulation Results of the FETS Laserwire Emittance Scanner”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3729-3731.
- J. Tan, G. Bellodi, A. Feschenko, and S. A. Gavrilov, “Results from the CERN LINAC4 Longitudinal Bunch Shape Monitor”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 415-419.
- M. E. Angoletta et al., “Operational Experience With the New Digital Low-Level RF System for CERN's PS Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4058-4061.
- S. Sharonov and J. M. Nogiec, “An Embedded Power Supply Controller”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P008, pp. 3464-3466.
- J. S. Schmidt, B. Koubek, and A. Schempp, “Tuning of the New 4-Rod RFQ for FNAL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS041, pp. 2580-2582.
- A. Arteche et al., “Characterisation of Electro-Optic Pickups for High Bandwidth Diagnostics at the High Luminosity LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2690-2693.
- G. Ambrosio and F. Broggi, “Study of the Power Deposition in the LHC Low-Beta Inner Triplet for a Nb3Sn Design”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP32G, pp. 1987-1989.
- L. R. Prost et al., “PXIE Low Energy Beam Transport Commissioning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4013-4015.
- M.-H. Chun et al., “Status and Progress of RF System for the PLS-II Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC023, pp. 2254-2256.
- R. J. Weggel et al., “Open Midplane Dipoles for a Muon Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP177, pp. 1160-1162.
- R. Huang, Q. K. Jia, H. T. Li, and Z. Zhao, “The Preliminary Study of a Pre-Bunched Terahertz Free Electron Laser by a Velocity Bunching Scheme”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 477-480.
- J. F. Schmerge et al., “In-Situ Cleaning of Metal Photo-Cathodes in RF Guns”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH063, pp. 732-735.
- M. O. Hyun et al., “Fabrication and Installation of Newly Designed Cryostats and Top Flanges for the Vertical Test of RISP”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 733.
- C. E. Reece et al., “Design and Construction of the Prototype Cryomodule Renascence for the CEBAF 12 GeV Upgrade”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP38, pp. 131-134.
- C. O. Choi, H. Jang, H. C. Jung, D. Y. Lee, and K. T. Son, “Development of 81.25 MHz 20 kW SSPA for RAON Accelerator”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 210-212.
- S. Liu, P. Bambade, S. Bai, T. Tauchi, and N. Terunuma, “Development of Diamond Sensors for Beam Halo and Compton Spectrum Diagnostics After The Interaction Point of ATF2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME003, pp. 470-472.
- M. Scholz and B. Beutner, “Electron Beam Phase Space Tomography at the European XFEL Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 196-198.
- G. Kalbfleisch, P. J. Limon, and C. Rode, “Operation of Multiple Superconducting Energy Doubler Magnets in Series”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1239-1242.
- J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations on the Boundary Fields of 4-rod RFQ Electrodes”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO020, pp. 3803-3805.
- E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 196-199.
- B. Gao, H. J. Chen, J. Chen, Y. B. Leng, K. R. Ye, and N. Zhang, “Wavefront Distortion Measurement at SSRF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 332-334.
- C. Benedetti, E. Esarey, W. Leemans, and C. B. Schroeder, “Modeling a 10 GeV Laser-Plasma Accelerator with INF&RNO”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP082, pp. 250-252.
- L. Fiscarelli et al., “Measurement of integrated gradient and field quality on the first Q2 magnets for HL-LHC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS64, pp. 2847-2850.
- H. Tanaka, T. Hara, H. Kitamura, N. Kumagai, and K. Togawa, “Dark Current Suppression at XFEL/SPring-8 by Using the Chromatic Aberration”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP051, pp. 2383-2385.
- J. W. Sim et al., “Software for a Database-Controlled Measurement System at the Fermilab Magnet Test Facility”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB06, pp. 2285-2287.
- J. S. Schmidt, B. Koubek, and A. Schempp, “Simulations of the Influence of 4-Rod RFQ Elements on its Voltage Distribution”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP038, pp. 3818-3820.
- A. Takagi et al., “An Irradiation System for Carbon Stripper Foils with 750 keV H- Beams”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS028, pp. 1550-1552.
- P. Balleyguier and F. Simoens, “Simulations vs. Measurements on the IPHI RFQ Cold Model”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO002, pp. 2127-2129.
- P. Drumm, “Implementation of MICE at RAL”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT105, pp. 779-781.
- F. Carra et al., “Mechanical Engineering and Design of Novel Collimators for HL-LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 369-372.
- T. Sipahi, S. Biedron, and S. V. Milton, “Wakefield Excitation in Power Extraction Cavity (PEC) of Co-linear X-band Energy Booster (CXEB) in Time Domain (T3P) with ACE3P”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 477-479.
- U. Dorda, M. Benedikt, H. O. Sch?Ânauer, and A. Wastl, “Simulation Studies of Longitudinal RF-noise and Phase Displacement Acceleration as Driving Mechanism for the MedAustron Synchrotron Slow Extraction”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA001, pp. 2501-2503.
- E. Quaranta, R. Bruce, and S. Redaelli, “SixTrack Simulation of Off-momentum Cleaning in LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO037, pp. 972-974.
- H. Shaker, S. Doebert, R. Leuxe, L. Dassa, and S. Sanaye Hajari, “Sub-harmonic Buncher Design for the CLIC Drive Beam Injector”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME052, pp. 1685-1687.
Back to search