Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. W. McGee, S. K. Chandrasekaran, A. C. Crawford, E. R. Harms, J. R. Leibfritz, and G. Wu, “Cryomdoule Test Stand Reduced-Magnetic Support Design at Fermilab”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2262-2264. doi:10.18429/JACoW-IPAC2016-WEPMR004
[n] P. Oddo et al., “Dynamically Tuned High-Q AC-Dipole Implementation”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM070, pp. 338-340.
[n] M. H. Helle, D. F. Gordon, D. Kaganovich, and A. Ting, “Optical Diagnostic for Off-Axis Electrons in a Laser Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP066, pp. 2948-2948.
[n] S. Yaramyshev et al., “Comparison of the Beam Dynamics Designs for the FAIR High Current Proton LINAC-RFQ”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP11, pp. 205-208.
[n] W. Y. Lai, J.-R. Chen, T. C. Tseng, and H. S. Wang, “Design and Prototype Tests of Auto-Alignment of a Whole-Ring Girder”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP090, pp. 3663-3665.
[n] Y. G. Song, J. H. Kim, Y.-S. Cho, and H.-J. Kwon, “Development of Web-based User Interface for Beam Status Monitoring of 100-MeV Proton Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2389-2391. doi:10.18429/JACoW-IPAC2016-WEPMR050
[n] H. M??ller et al., “Design, Production, and Testing of Superconducting Magnets for the Super-FRS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4128-4131. doi:10.18429/JACoW-IPAC2019-THPTS011
[n] R. K. Reece et al., “Operational Experience and Techniques for Controlled Longitudinal Phase Space Dilution in the AGS Using a High Harmonic Cavity”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1934-1937.
[n] M. Hempel et al., “Bunch-by-Bunch Beam Loss Diagnostics with Diamond Detectors at the LHC”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP203, pp. 41-45.
[n] D. Gordon, A. Lal, C. E. Clayton, M. Everett, and C. Joshi, “A Novel Technique for Probing theTransverse Interactions Between an Electron Beam and a Plasma”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB05, pp. 770-772.
[n] R. M. Jones et al., “The Transverse Long-Range Wakefield in RDDS1 for the JLC/NLC X-Band Linacs”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA37, pp. 3468-3470.
[n] Y.-E. Sun, M. D. Church, P. Piot, and C. R. Prokop, “EXPERIMENT AND SIMULATIONS OF SUB-PS ELECTRON BUNCH TRAIN GENERATION AT FERMILAB PHOTOINJECTORS”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB25, pp. 609-612.
[n] D. Hunt, K. Kennedy, and T. Stevens, “Design of the PEP-II Low Energy Ring Vacuum System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP13, pp. 2067-2068.
[n] R. O. Bangerter and A. Faltens, “Induction Linacs for Heavy Ion Fusion”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU2-03, pp. 351-354.
[n] H. F. Breede, H.-J. Grabosch, M. Sachwitz, and L. V. Vu, “A Power Switching Ionization Profile Monitor (3D-IPM)”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP015, pp. 47-49.
[n] D. E. Young et al., “Initial Performance of the NAL 200-MeV Linear Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 517-522.
[n] H. H. Braun et al., “The CLIC Study of a Multi-TeV e+e- Linear Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUDR3, pp. 250-252.
[n] S. P. M, T. Korsbjerg, and E. N. Zaplatine, “ASTRID Electron Cavity Study”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P038, pp. 2920-2922.
[n] R. H. A. Farias, O. R. Bagnato, F. R. Francisco, D. V. Freitas, and F. E. Manoel, “Development of Diffusion Bonding Joints between Oxgen Free Copper and AISI 316L Stainless Steel for Accelerator Components”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB042, pp. 3975-3977.
[n] Y. Baconnier, J. Gareyte, and P. Lefevre, “High Intensity Phenomena Observed in the CPS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1027-1032.
[n] R. Risler, J. Eenmaa, J. Jacky, I. Kalet, P. Wootton, and S. Lindbaeck, “Installation of the Cyclotron Based Clinical Neutron Therapy System in Seattle”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J29, pp. 428-430.
[n] C. N. Booth, L. C. Howlett, N. Schofield, and P. J. Smith, “The Target Drive for the MICE Experiment”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS005, pp. 2403-2405.
[n] R. J. Jim?â et al., “Improving the Safety and Protective Automatic Actions of the CMS Electromagnetic Calorimeter Detector Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1639-1642. doi:10.18429/JACoW-ICALEPCS2017-THPHA109
[n] C. Jach, R. Harold, K. Smedley, E. Tacconi, and R. Winje, “Low Energy Booster Main Magnet Power Supply System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1438-1441.
[n] G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058.
[n] L. Rinolfi, “Design of the NLC Positron Source”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP03, pp. 647-649.
[n] R. Endrich, E. A. Giese, W. P. Schleich, P. Kling, and R. Sauerbrey, “Quantum FEL I: Multi-mode Theory”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP004, pp. 353-357.
[n] G. Nassibian and K. Schindl, “RF Beam Recombination (Funnelling") at the CERN PSB by Means of an 8 MHz Dipole Magnet"”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2760-2763.
[n] M. Conde et al., “SRRC/ANL High Current L-Band Single Cell Photocathode RF Gun”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP33C, pp. 1441-1443.
[n] C. Bourat, H. Braun, and L. Rinolfi, “New Optics of the LEP Injector Linac for Positron Production”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 704-707.
[n] P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
[n] L. Badan et al., “RF Characterization of Small Scale Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D17, pp. 941-947.
[n] N. M. Kroll et al., “Planar Accelerator Structures for Millimeter Wavelengths”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA92, pp. 3612-3614.
[n] G. R. White et al., “Device and Accelerator Modelling Relational Database”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP025, pp. 4820-4822.
[n] W. F. Bergan, I. V. Bazarov, C. J. R. Duncan, and D. L. Rubin, “Applications of Dimension-Reduction to Various Accelerator Physics Problems”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4060-4062. doi:10.18429/JACoW-IPAC2019-THPRB099
[n] J. E. Theroux et al., “A ÔÇÿShort PortÔÇÖ Beamline For Mounting Custom Targets To A Ge PettraceÔäó Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 361-366.
[n] M. Kwiatkowski, A. Casta??eda, and B. Todd, “Dependable Design using Programmable Logic Devices”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA026, pp. 1381-1383.
[n] N. Messbah, F. Abbasi Davani, S. Ahmadiannamin, H. Shaker, and M. Shirshekan, “Design of Beam Position Monitoring System for IPM Low Energy Electron LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4394-4396. doi:10.18429/JACoW-IPAC2019-THPTS019
[n] V. Gubin, O. Alyakrinsky, S. P. Bardakhanov, and M. Golkovsky, “About Carbides-made Nanoceramics Fission Target for RIB Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC089, pp. 268-270.
[n] H. Herminghaus, K.-H. Kaiser, and U. Ludwig-Mertin, “The Design of Double Sided Microtrons”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H02, pp. 260-262.
[n] Z. Greenwald, S. Greenwald, and D. Rice, “Simulation and Stability of a Crab Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1857-1860.
[n] C. Jach and D. Wolff, “Main Injector Power Distribution System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO013, pp. 2679-2681.
[n] K. Aulenbacher et al., “Results from the CLIC Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01T, pp. 42-46.
[n] M. Baltay, P. Hamann, W. Sattler, and J. Spencer, “Comparison of SmCo and NdFeB in PM Mulitpoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1431-1434.
[n] V. Karpenko, “The Superconducting Super Collider Magnet System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1375-1379.
[n] P. L. Corredoura, J. L. Pellegrin, H. D. Schwarz, and J. C. Sheppard, “An Active Feedback System to Control Synchrotron Oscillations in the SLC Damping Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1879-1882.
[n] M. T. Rolland and K. J. Gofron, “EPICS Controlled Wireless Sensors”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1016. doi:10.18429/JACoW-ICALEPCS2019-WEMPL007
[n] A. Bungau, R. Cywinski, and J. S. Lord, “Development and Optimisation of the Muon Target at the ISIS-RAL Muon Facility”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP051, pp. 1397-1399.
[n] N. Fewell and R. Witkover, “Beam Diagnostics at the BNL 200 MeV Linac”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C02, pp. 54-62.
[n] Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271.
[n] S. Telfer, “An Integrated Traveling-Wave Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB039, pp. 2120-2122.
[n] J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
[n] H.-D. Nuhn, R. Boyce, J. Cerino, and T. Hostetler, “The SSRL Injector Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 973-976.
[n] S. Poprocki, S. W. Buechele, J. A. Crittenden, and D. L. Rubin, “Progress in Measurement and Modeling of Electron Cloud Effects at CesrTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3007-3010. doi:10.18429/JACoW-IPAC2018-THPAF025
[n] V. Agoritsas et al., “Measurement and Monitoring of the Ejected Proton Beam 58" of the CERN Proton Synchrotron"”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1155-1161.
[n] M. Boussoukaya, M. Bergeret, R. Chehab, M. Franco, and B. Leblond, “Photoemission in Nanosecond and Picosecond Regimes Obtained from Macro and Micro Cathodes”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 325-328.
[n] K. Hosoyama et al., “Fabrication of a Full Scale Crab Cavity for KEKB”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C17, pp. 547-552.
[n] V. Volkov et al., “Test Stand Results of CW 100 mA Electron RF Gun for Novosibirsk ERL FEL”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 507-509. doi:10.18429/JACoW-RUPAC2018-THPSC53
[n] B. Petersen, “Industrialization of Superconducting Accelerator Module Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM03, pp. 1964-1966.
[n] H. Tang, A. V. Kulikov, J. E. Clendenin, S. D. Ecklund, R. A. Miller, and A. D. Yeremian, “The NLC Positron Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC18, pp. 1033-1035.
[n] A. Barbalace, A. Luchetta, G. Manduchi, C. Taliercio, B. Carvalho, and D. F. Valc?írcel, “Comparative Analysis of EPICS IOC and MARTe for the Development of a Hard Real-Time Control Application”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN036, pp. 961-964.
[n] V. G. Dolbilov et al., “The KUTI-20 Accelerator First Stage Adjusting”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-47, pp. 367-370.
[n] S. Matsumoto et al., “Nextef: The 100MW X-band Test Facility in KEK”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP096, pp. 2740-2742.
[n] D. E. Potkins, M. P. Dehnel, T. Kubley, O. F. Toader, and N. R. Lobanov, “UniBEaM - Beam Profiler for Beam Characterization and Position Feedback”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 335-337. doi:10.18429/JACoW-IBIC2017-WEPCC02
[n] M. Wiencek et al., “Tests of the Accelerating Cryomodules for the European X-Ray Free Electron Laser”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP054, pp. 244-246.
[n] J. C. Schuchman, J. Aloia, H. Hsieh, T. Kim, and S. Pjerov, “X-Ray Lithography Source (SXLS) Vacuum System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 569-571.
[n] C. W. Owen, C. A. Radmer, and D. E. Young, “RF Perturbation Measurements in Long Linac Cavities”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 286-290.
[n] C. M. Bhat and J. Marriner, “Gamma Ray Activation of the Fermilab Pbar Target”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 831-834.
[n] R. Bossart et al., “The LEP Injector Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH412, pp. 614-616.
[n] A. Grassellino et al., “Preservation of Very High Quality Factors of 1.3 GHz Nine Cell Cavities From Bare Vertical Test to Dressed Horizontal Test”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB028, pp. 149-153.
[n] T. Kamitani et al., “Status of C-band Accelerator Module in the KEKB Injector Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN027, pp. 2769-2771.
[n] X. J. Wang et al., “Efficiency and Spectrum Enhancement in a Tapered Free-Electron Laser Amplifier”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP053, pp. 1207-1207.
[n] V. A. Yarba, “The Status and Development of the UNK Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2913-2918.
[n] H. N. Jungwirth and J. G. de Villiers, “A New Design Proposal for a 200 MeV Superconducting Ring-Cyclotron Magnet”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XII-04, pp. 709-712.
[n] B. A. Baklakov, P. K. Lebedev, V. V. Parkhomchuk, A. A. Sery, V. D. Shiltsev, and A. I. Sleptsov, “Investigation of Seismic Vibrations and Relative Displacements of Linear Collider VLEPP Elements”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3273-3276.
[n] V. Anguelov and D. Dinev, “Simulations of the Multiturn Injection into Nuclotron Booster”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP062G, pp. 2417-2419.
[n] N. Xiong, P. Hathaway, N. Hauser, and T. K. Lam, “Multi-platform Processor Framework for Data Analysis, Data Acquisition and Simulation”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP076, pp. 815-817.
[n] P. Volfbeyn, I. Mastovsky, G. Bekefi, I. Wilson, and W. Wuensch, “Experimental Studies of a CERN-CLIC 32.98 GHz High Gradient Accelerating Structure Driven by the MIT Free Electron Laser Amplifier”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC15, pp. 734-736.
[n] R. Bossart et al., “CLIC Test Facility Developments and Results”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC10, pp. 719-721.
For LaTeX
Use Complete Form
For BibTeX
References
- M. W. McGee, S. K. Chandrasekaran, A. C. Crawford, E. R. Harms, J. R. Leibfritz, and G. Wu, “Cryomdoule Test Stand Reduced-Magnetic Support Design at Fermilab”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2262-2264.
- P. Oddo et al., “Dynamically Tuned High-Q AC-Dipole Implementation”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM070, pp. 338-340.
- M. H. Helle, D. F. Gordon, D. Kaganovich, and A. Ting, “Optical Diagnostic for Off-Axis Electrons in a Laser Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP066, pp. 2948-2948.
- S. Yaramyshev et al., “Comparison of the Beam Dynamics Designs for the FAIR High Current Proton LINAC-RFQ”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP11, pp. 205-208.
- W. Y. Lai, J.-R. Chen, T. C. Tseng, and H. S. Wang, “Design and Prototype Tests of Auto-Alignment of a Whole-Ring Girder”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP090, pp. 3663-3665.
- Y. G. Song, J. H. Kim, Y.-S. Cho, and H.-J. Kwon, “Development of Web-based User Interface for Beam Status Monitoring of 100-MeV Proton Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2389-2391.
- H. M??ller et al., “Design, Production, and Testing of Superconducting Magnets for the Super-FRS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4128-4131.
- R. K. Reece et al., “Operational Experience and Techniques for Controlled Longitudinal Phase Space Dilution in the AGS Using a High Harmonic Cavity”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1934-1937.
- M. Hempel et al., “Bunch-by-Bunch Beam Loss Diagnostics with Diamond Detectors at the LHC”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP203, pp. 41-45.
- D. Gordon, A. Lal, C. E. Clayton, M. Everett, and C. Joshi, “A Novel Technique for Probing theTransverse Interactions Between an Electron Beam and a Plasma”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB05, pp. 770-772.
- R. M. Jones et al., “The Transverse Long-Range Wakefield in RDDS1 for the JLC/NLC X-Band Linacs”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA37, pp. 3468-3470.
- Y.-E. Sun, M. D. Church, P. Piot, and C. R. Prokop, “EXPERIMENT AND SIMULATIONS OF SUB-PS ELECTRON BUNCH TRAIN GENERATION AT FERMILAB PHOTOINJECTORS”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB25, pp. 609-612.
- D. Hunt, K. Kennedy, and T. Stevens, “Design of the PEP-II Low Energy Ring Vacuum System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP13, pp. 2067-2068.
- R. O. Bangerter and A. Faltens, “Induction Linacs for Heavy Ion Fusion”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU2-03, pp. 351-354.
- H. F. Breede, H.-J. Grabosch, M. Sachwitz, and L. V. Vu, “A Power Switching Ionization Profile Monitor (3D-IPM)”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP015, pp. 47-49.
- D. E. Young et al., “Initial Performance of the NAL 200-MeV Linear Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 517-522.
- H. H. Braun et al., “The CLIC Study of a Multi-TeV e+e- Linear Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUDR3, pp. 250-252.
- S. P. M, T. Korsbjerg, and E. N. Zaplatine, “ASTRID Electron Cavity Study”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P038, pp. 2920-2922.
- R. H. A. Farias, O. R. Bagnato, F. R. Francisco, D. V. Freitas, and F. E. Manoel, “Development of Diffusion Bonding Joints between Oxgen Free Copper and AISI 316L Stainless Steel for Accelerator Components”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB042, pp. 3975-3977.
- Y. Baconnier, J. Gareyte, and P. Lefevre, “High Intensity Phenomena Observed in the CPS”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1027-1032.
- R. Risler, J. Eenmaa, J. Jacky, I. Kalet, P. Wootton, and S. Lindbaeck, “Installation of the Cyclotron Based Clinical Neutron Therapy System in Seattle”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J29, pp. 428-430.
- C. N. Booth, L. C. Howlett, N. Schofield, and P. J. Smith, “The Target Drive for the MICE Experiment”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS005, pp. 2403-2405.
- R. J. Jim?â et al., “Improving the Safety and Protective Automatic Actions of the CMS Electromagnetic Calorimeter Detector Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1639-1642.
- C. Jach, R. Harold, K. Smedley, E. Tacconi, and R. Winje, “Low Energy Booster Main Magnet Power Supply System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1438-1441.
- G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058.
- L. Rinolfi, “Design of the NLC Positron Source”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP03, pp. 647-649.
- R. Endrich, E. A. Giese, W. P. Schleich, P. Kling, and R. Sauerbrey, “Quantum FEL I: Multi-mode Theory”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP004, pp. 353-357.
- G. Nassibian and K. Schindl, “RF Beam Recombination (Funnelling") at the CERN PSB by Means of an 8 MHz Dipole Magnet"”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2760-2763.
- M. Conde et al., “SRRC/ANL High Current L-Band Single Cell Photocathode RF Gun”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP33C, pp. 1441-1443.
- C. Bourat, H. Braun, and L. Rinolfi, “New Optics of the LEP Injector Linac for Positron Production”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 704-707.
- P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
- L. Badan et al., “RF Characterization of Small Scale Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D17, pp. 941-947.
- N. M. Kroll et al., “Planar Accelerator Structures for Millimeter Wavelengths”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA92, pp. 3612-3614.
- G. R. White et al., “Device and Accelerator Modelling Relational Database”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP025, pp. 4820-4822.
- W. F. Bergan, I. V. Bazarov, C. J. R. Duncan, and D. L. Rubin, “Applications of Dimension-Reduction to Various Accelerator Physics Problems”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4060-4062.
- J. E. Theroux et al., “A ÔÇÿShort PortÔÇÖ Beamline For Mounting Custom Targets To A Ge PettraceÔäó Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 361-366.
- M. Kwiatkowski, A. Casta??eda, and B. Todd, “Dependable Design using Programmable Logic Devices”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA026, pp. 1381-1383.
- N. Messbah, F. Abbasi Davani, S. Ahmadiannamin, H. Shaker, and M. Shirshekan, “Design of Beam Position Monitoring System for IPM Low Energy Electron LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4394-4396.
- V. Gubin, O. Alyakrinsky, S. P. Bardakhanov, and M. Golkovsky, “About Carbides-made Nanoceramics Fission Target for RIB Production”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC089, pp. 268-270.
- H. Herminghaus, K.-H. Kaiser, and U. Ludwig-Mertin, “The Design of Double Sided Microtrons”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H02, pp. 260-262.
- Z. Greenwald, S. Greenwald, and D. Rice, “Simulation and Stability of a Crab Cavity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1857-1860.
- C. Jach and D. Wolff, “Main Injector Power Distribution System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO013, pp. 2679-2681.
- K. Aulenbacher et al., “Results from the CLIC Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY01T, pp. 42-46.
- M. Baltay, P. Hamann, W. Sattler, and J. Spencer, “Comparison of SmCo and NdFeB in PM Mulitpoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1431-1434.
- V. Karpenko, “The Superconducting Super Collider Magnet System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1375-1379.
- P. L. Corredoura, J. L. Pellegrin, H. D. Schwarz, and J. C. Sheppard, “An Active Feedback System to Control Synchrotron Oscillations in the SLC Damping Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1879-1882.
- M. T. Rolland and K. J. Gofron, “EPICS Controlled Wireless Sensors”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1016.
- A. Bungau, R. Cywinski, and J. S. Lord, “Development and Optimisation of the Muon Target at the ISIS-RAL Muon Facility”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP051, pp. 1397-1399.
- N. Fewell and R. Witkover, “Beam Diagnostics at the BNL 200 MeV Linac”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper C02, pp. 54-62.
- Yu. Shvyd, “X-ray Monochromators for Self-seeding XFELs in the Photon Energy Range Starting from 1.5 keV”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP092, pp. 269-271.
- S. Telfer, “An Integrated Traveling-Wave Photoinjector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB039, pp. 2120-2122.
- J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
- H.-D. Nuhn, R. Boyce, J. Cerino, and T. Hostetler, “The SSRL Injector Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 973-976.
- S. Poprocki, S. W. Buechele, J. A. Crittenden, and D. L. Rubin, “Progress in Measurement and Modeling of Electron Cloud Effects at CesrTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3007-3010.
- V. Agoritsas et al., “Measurement and Monitoring of the Ejected Proton Beam 58" of the CERN Proton Synchrotron"”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1155-1161.
- M. Boussoukaya, M. Bergeret, R. Chehab, M. Franco, and B. Leblond, “Photoemission in Nanosecond and Picosecond Regimes Obtained from Macro and Micro Cathodes”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 325-328.
- K. Hosoyama et al., “Fabrication of a Full Scale Crab Cavity for KEKB”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C17, pp. 547-552.
- V. Volkov et al., “Test Stand Results of CW 100 mA Electron RF Gun for Novosibirsk ERL FEL”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 507-509.
- B. Petersen, “Industrialization of Superconducting Accelerator Module Production”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM03, pp. 1964-1966.
- H. Tang, A. V. Kulikov, J. E. Clendenin, S. D. Ecklund, R. A. Miller, and A. D. Yeremian, “The NLC Positron Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC18, pp. 1033-1035.
- A. Barbalace, A. Luchetta, G. Manduchi, C. Taliercio, B. Carvalho, and D. F. Valc?írcel, “Comparative Analysis of EPICS IOC and MARTe for the Development of a Hard Real-Time Control Application”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN036, pp. 961-964.
- V. G. Dolbilov et al., “The KUTI-20 Accelerator First Stage Adjusting”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-47, pp. 367-370.
- S. Matsumoto et al., “Nextef: The 100MW X-band Test Facility in KEK”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP096, pp. 2740-2742.
- D. E. Potkins, M. P. Dehnel, T. Kubley, O. F. Toader, and N. R. Lobanov, “UniBEaM - Beam Profiler for Beam Characterization and Position Feedback”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 335-337.
- M. Wiencek et al., “Tests of the Accelerating Cryomodules for the European X-Ray Free Electron Laser”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP054, pp. 244-246.
- J. C. Schuchman, J. Aloia, H. Hsieh, T. Kim, and S. Pjerov, “X-Ray Lithography Source (SXLS) Vacuum System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 569-571.
- C. W. Owen, C. A. Radmer, and D. E. Young, “RF Perturbation Measurements in Long Linac Cavities”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 286-290.
- C. M. Bhat and J. Marriner, “Gamma Ray Activation of the Fermilab Pbar Target”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 831-834.
- R. Bossart et al., “The LEP Injector Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH412, pp. 614-616.
- A. Grassellino et al., “Preservation of Very High Quality Factors of 1.3 GHz Nine Cell Cavities From Bare Vertical Test to Dressed Horizontal Test”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB028, pp. 149-153.
- T. Kamitani et al., “Status of C-band Accelerator Module in the KEKB Injector Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN027, pp. 2769-2771.
- X. J. Wang et al., “Efficiency and Spectrum Enhancement in a Tapered Free-Electron Laser Amplifier”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP053, pp. 1207-1207.
- V. A. Yarba, “The Status and Development of the UNK Project”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2913-2918.
- H. N. Jungwirth and J. G. de Villiers, “A New Design Proposal for a 200 MeV Superconducting Ring-Cyclotron Magnet”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XII-04, pp. 709-712.
- B. A. Baklakov, P. K. Lebedev, V. V. Parkhomchuk, A. A. Sery, V. D. Shiltsev, and A. I. Sleptsov, “Investigation of Seismic Vibrations and Relative Displacements of Linear Collider VLEPP Elements”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3273-3276.
- V. Anguelov and D. Dinev, “Simulations of the Multiturn Injection into Nuclotron Booster”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP062G, pp. 2417-2419.
- N. Xiong, P. Hathaway, N. Hauser, and T. K. Lam, “Multi-platform Processor Framework for Data Analysis, Data Acquisition and Simulation”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP076, pp. 815-817.
- P. Volfbeyn, I. Mastovsky, G. Bekefi, I. Wilson, and W. Wuensch, “Experimental Studies of a CERN-CLIC 32.98 GHz High Gradient Accelerating Structure Driven by the MIT Free Electron Laser Amplifier”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC15, pp. 734-736.
- R. Bossart et al., “CLIC Test Facility Developments and Results”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC10, pp. 719-721.
Back to search