Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Elliott et al., “First FRIB =0.041 Production Coldmass Build”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 541-543. doi:10.18429/JACoW-LINAC2016-TUPLR033
[n] K. Crawford, S. Simrock, C. Hovater, and A. Krycuk, “The CEBAF Fiber Optic Phase Reference System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ29, pp. 2732-2734.
[n] M. Aiba, S. Machida, and Y. Mori, “A Study of Transverse Resonance Crossing in FFAG”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT115, pp. 2119-2121.
[n] A. Dehne, T. Hermes, N. Moeller, and R. Bacher, “MARWIN: A Mobile Autonomous Robot for Maintenance and Inspection”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 76-80. doi:10.18429/JACoW-ICALEPCS2017-MOCPL06
[n] K. Damminsek et al., “Magnetic Characterization of a Superconducting Transverse Gradient Undulator for Compact Laser Wakefield Accelerator-Driven FELs”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1772-1775. doi:10.18429/JACoW-IPAC2022-WEPOST034
[n] T. Godlove et al., “The 10 keV Injector for the University of Maryland Electron Ring Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA36, pp. 1970-1972.
[n] J. Pasternak, J. Fourrier, and F. Meot, “Acceleration in spiral FFAG using field map data”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP068, pp. 3515-3517.
[n] D. Longuevergne and A. Miyazaki, “Evidence of Reduced Magnetic Sensitivities in Low Beta SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFDV04, pp..
[n] D. Koser, H. Podlech, P. Gerhard, L. Groening, and O. K. Kester, “Prototype Design of a Newly Revised CW RFQ for the High Charge State Injector at GSI”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 889-891. doi:10.18429/JACoW-IPAC2016-MOPOY020
[n] V. G. Vaccaro, A. D, and M. R. Masullo, “A Rationale to Design Side Coupled Linac (SCL): a Faster and More Reliable Tool”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS049, pp. 1606-1608.
[n] R. L. Fulton, “Mechanical Design of the LAMPF Low Energy Pion Channel”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1027-1029.
[n] J. W. Lewellen, D. Gorelov, D. Perez, M. E. Schneider, and E. I. Simakov, “A Coupon Tester for Normal Conducting High-Gradient Materials”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1147-1150. doi:10.18429/JACoW-IPAC2021-MOPAB371
[n] M. Pasini et al., “HIE-ISOLDE LINAC: Status of the R&D Activities”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TH-05, pp. 165-169.
[n] N. Iida et al., “Optics Design and Observation for the Beam Abort System in SuperKEKB HER”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2922-2924. doi:10.18429/JACoW-IPAC2017-WEPIK007
[n] R. Visintini, F. Barbo, A. Buonanno, M. MIlani, and G. Simonetti, “Elettra 2.0: Activities in the experimental Hall”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 434-436. doi:10.18429/JACoW-IPAC2023-MOPA162
[n] E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3218-3221.
[n] C. Takahashi, A. Al Medawer, M. Holz, M. Muradi, and H. Tarawneh, “Insertion device correction based on machine learning models at the MAX IV 3 GeV ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM025, unpublished.
[n] T. Kuo et al., “Beam Characteristics Using Stable Isotopes from a Multicusp Source for the TRIUMF ISAC Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D056, pp. 220-222.
[n] D. J. Larson et al., “Ion Optical Design of the BRF-FNAL-SAIC-UW PET Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V018, pp. 1403-1405.
[n] P. F. Tavares, “A Semi-analytical Approach to the Design of Low Energy Cylindrically Symmetric Transport Lines”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ29, pp. 3352-3354.
[n] T. Kii et al., “Slippage Effect on the Table-Top THz FEL Amplifier Project in Kyoto University”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC68, pp. 390-393.
[n] A. Pei, S. Anderson, D. Jenner, X. Kang, S. Y. Lee, and D. McCammon, “An RF System for a Compact Synchrotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P027, pp. 2968-2970.
[n] T. W. Hardek, D. Rees, and C. Ziomek, “A Low-Frequency High-Voltage RF-Barrier Bunching System for High-Intensity Neutron Source Compressor Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ31, pp. 1596-1598.
[n] T. Katayama, M. Okamura, T. Tominaka, and N. Tsoupas, “Design Study of Helical Partial Snake Magnet for AGS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B14, pp. 2116-2118.
[n] W. Chang et al., “Enhanced Pneumatic Tuner Control for FRIB Half-Wave Resonators”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 829. doi:10.18429/JACoW-SRF2021-THPTEV002
[n] I. R. Bailey et al., “Spin Tracking at the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN083, pp. 2901-2903.
[n] K. Hirano et al., “High Power CW Linac in PNC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 546-549.
[n] T. Maruta and M. Ikegami, “Longitudinal Beam Diagnosis with RF Chopper System”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3C04, pp. 591-595.
[n] E. Gerken, J. M. Gahl, D. Rees, W. Roybal, and K. Cummings, “Resonant Ring For Testing of Accelerator RF Windows”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P051, pp. 3725-3727.
[n] A. Mikhailichenko and D. Rubin, “Concentric Ring Colliding Beam Machine with Dual Aperture Quadrupoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP032G, pp. 433-435.
[n] J. T. Collins, H. Cease, S. J. Izzo, Z. Liu, J. Nudell, and C. A. Preissner, “Preliminary Design of the Magnet Support and Alignment Systems for the Aps-U Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 87-89. doi:10.18429/JACoW-MEDSI2016-MOPE34
[n] H. Carter et al., “Automated Microwave Low Power Testing Techniques for NLC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH471, pp. 761-763.
[n] Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
[n] A. Mosnier, “Cures of Coupled Bunch Instabilities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRBR2, pp. 628-632.
[n] R. Risler, J. Eenmaa, J. Jacky, I. Kalet, P. Wootton, and S. Lindbaeck, “Installation of the Cyclotron Based Clinical Neutron Therapy System in Seattle”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J29, pp. 428-430.
[n] M. Sugimoto, R. Kato, and R. Nagai, “JAERI FEL Control System”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-59, pp. 840-841.
[n] F.-J. Decker, P. Raimondi, R. Iverson, and S. Debarger, “Short High Charge Bunches in the SLAC Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOE02, pp. 266-268.
[n] J. K. Pozimski et al., “PAMELA - A Model for an FFAG based Hadron Therapy Machine”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN076, pp. 2880-2882.
[n] G. Portmann, D. Robin, and L. Schachinger, “Automated Beam Based Alignment of the ALS Quadrupoles”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ13, pp. 2693-2695.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Elliott et al., “First FRIB =0.041 Production Coldmass Build”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 541-543.
- K. Crawford, S. Simrock, C. Hovater, and A. Krycuk, “The CEBAF Fiber Optic Phase Reference System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ29, pp. 2732-2734.
- M. Aiba, S. Machida, and Y. Mori, “A Study of Transverse Resonance Crossing in FFAG”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT115, pp. 2119-2121.
- A. Dehne, T. Hermes, N. Moeller, and R. Bacher, “MARWIN: A Mobile Autonomous Robot for Maintenance and Inspection”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 76-80.
- K. Damminsek et al., “Magnetic Characterization of a Superconducting Transverse Gradient Undulator for Compact Laser Wakefield Accelerator-Driven FELs”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1772-1775.
- T. Godlove et al., “The 10 keV Injector for the University of Maryland Electron Ring Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA36, pp. 1970-1972.
- J. Pasternak, J. Fourrier, and F. Meot, “Acceleration in spiral FFAG using field map data”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP068, pp. 3515-3517.
- D. Longuevergne and A. Miyazaki, “Evidence of Reduced Magnetic Sensitivities in Low Beta SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFDV04, pp..
- D. Koser, H. Podlech, P. Gerhard, L. Groening, and O. K. Kester, “Prototype Design of a Newly Revised CW RFQ for the High Charge State Injector at GSI”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 889-891.
- V. G. Vaccaro, A. D, and M. R. Masullo, “A Rationale to Design Side Coupled Linac (SCL): a Faster and More Reliable Tool”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS049, pp. 1606-1608.
- R. L. Fulton, “Mechanical Design of the LAMPF Low Energy Pion Channel”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1027-1029.
- J. W. Lewellen, D. Gorelov, D. Perez, M. E. Schneider, and E. I. Simakov, “A Coupon Tester for Normal Conducting High-Gradient Materials”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1147-1150.
- M. Pasini et al., “HIE-ISOLDE LINAC: Status of the R&D Activities”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TH-05, pp. 165-169.
- N. Iida et al., “Optics Design and Observation for the Beam Abort System in SuperKEKB HER”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2922-2924.
- R. Visintini, F. Barbo, A. Buonanno, M. MIlani, and G. Simonetti, “Elettra 2.0: Activities in the experimental Hall”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA162, pp. 434-436.
- E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3218-3221.
- C. Takahashi, A. Al Medawer, M. Holz, M. Muradi, and H. Tarawneh, “Insertion device correction based on machine learning models at the MAX IV 3 GeV ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM025, this conference.
- T. Kuo et al., “Beam Characteristics Using Stable Isotopes from a Multicusp Source for the TRIUMF ISAC Facility”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D056, pp. 220-222.
- D. J. Larson et al., “Ion Optical Design of the BRF-FNAL-SAIC-UW PET Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V018, pp. 1403-1405.
- P. F. Tavares, “A Semi-analytical Approach to the Design of Low Energy Cylindrically Symmetric Transport Lines”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ29, pp. 3352-3354.
- T. Kii et al., “Slippage Effect on the Table-Top THz FEL Amplifier Project in Kyoto University”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC68, pp. 390-393.
- A. Pei, S. Anderson, D. Jenner, X. Kang, S. Y. Lee, and D. McCammon, “An RF System for a Compact Synchrotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P027, pp. 2968-2970.
- T. W. Hardek, D. Rees, and C. Ziomek, “A Low-Frequency High-Voltage RF-Barrier Bunching System for High-Intensity Neutron Source Compressor Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ31, pp. 1596-1598.
- T. Katayama, M. Okamura, T. Tominaka, and N. Tsoupas, “Design Study of Helical Partial Snake Magnet for AGS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B14, pp. 2116-2118.
- W. Chang et al., “Enhanced Pneumatic Tuner Control for FRIB Half-Wave Resonators”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 829.
- I. R. Bailey et al., “Spin Tracking at the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN083, pp. 2901-2903.
- K. Hirano et al., “High Power CW Linac in PNC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 546-549.
- T. Maruta and M. Ikegami, “Longitudinal Beam Diagnosis with RF Chopper System”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3C04, pp. 591-595.
- E. Gerken, J. M. Gahl, D. Rees, W. Roybal, and K. Cummings, “Resonant Ring For Testing of Accelerator RF Windows”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P051, pp. 3725-3727.
- A. Mikhailichenko and D. Rubin, “Concentric Ring Colliding Beam Machine with Dual Aperture Quadrupoles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP032G, pp. 433-435.
- J. T. Collins, H. Cease, S. J. Izzo, Z. Liu, J. Nudell, and C. A. Preissner, “Preliminary Design of the Magnet Support and Alignment Systems for the Aps-U Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 87-89.
- H. Carter et al., “Automated Microwave Low Power Testing Techniques for NLC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH471, pp. 761-763.
- Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
- A. Mosnier, “Cures of Coupled Bunch Instabilities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRBR2, pp. 628-632.
- R. Risler, J. Eenmaa, J. Jacky, I. Kalet, P. Wootton, and S. Lindbaeck, “Installation of the Cyclotron Based Clinical Neutron Therapy System in Seattle”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J29, pp. 428-430.
- M. Sugimoto, R. Kato, and R. Nagai, “JAERI FEL Control System”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-59, pp. 840-841.
- F.-J. Decker, P. Raimondi, R. Iverson, and S. Debarger, “Short High Charge Bunches in the SLAC Linac”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOE02, pp. 266-268.
- J. K. Pozimski et al., “PAMELA - A Model for an FFAG based Hadron Therapy Machine”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN076, pp. 2880-2882.
- G. Portmann, D. Robin, and L. Schachinger, “Automated Beam Based Alignment of the ALS Quadrupoles”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ13, pp. 2693-2695.
Back to search