Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Borland, V. Sajaev, and Y. Sun, “A Seven-bend-achromat Lattice as a Potential Upgrade for the Advanced Photon Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO07, pp. 249-251.
[n] R. Assmann, B. Dehning, and J. Matheson, “Use of Movable Beam Position Monitors for Beam Size Measurements”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A01, pp. 1693-1695.
[n] M. S. Zisman, R. B. Yourd, and H. Hsieh, “Design of the PEP-II Low-Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA05, pp. 533-535.
[n] R. G. K. Hart, F. O. G. Bauer, P-F. Giraud, H. L. Groenstege, and H. van der Graaf, “The ATLAS Barrel Alignment Readout System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP080, pp. 266-268.
[n] Y. Sun and M. Borland, “Achieving A Quasi Third Order Achromat in APS Upgrade Lattice”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO13, pp. 267-269.
[n] Y. I. Levinsen, H. Burkhardt, A. Macpherson, M. Pereira, and S. X. Roe, “Fill Analysis and Experimental Background Observations in the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ020, pp. 1846-1848.
[n] P. Sprangle, C. M. Tang, and A. Ting, “Radiation Focusing, Guiding and Steering in Free Electron Lasers”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 189-194.
[n] H. Nakai et al., “Cryogenic System for the KEKB Crab Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP04, pp. XX-XX.
[n] M. Fukuda, K. Arakawa, T. Karasawa, and S. Okumura, “External Beam Phase Width Measurements at the JAERI AVF Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 548-551.
[n] J. L. Fricke, B. Piosczyk, and J. E. Vetter, “Measurements on the First Section of the Superconducting Proton Linac at Karlsruhe”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper F06, pp. 151-155.
[n] P. Grosse-Wiesmann, G. Coignet, C. D. Johnson, R. Schmidt, W. Weingarten, and L. Wood, “Linac - Ring - Collider B-Factory”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 383-386.
[n] Y. Ohnishi, H. Koiso, A. Morita, K. Oide, and H. Sugimoto, “Lattice Design of Low Emittance and Low Beta Function at Collision Point for SuperKEKB”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ007, pp. 3693-3695.
[n] J. R. Calvey et al., “CesrTA Retarding Field Analyzer Measurements in Drifts, Dipoles, Quadrupoles and Wigglers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD023, pp. 1973-1975.
[n] L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
[n] H. Nakayama et al., “Beam Background and MDI Design for SuperKEKB/Belle-II”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ010, pp. 3702-3704.
[n] H. J. Qian et al., “RF DESIGN AND HIGH POWER TESTS OF A NEW TSINGHUA PHOTOCATHODE RF GUN”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD55, pp. 165-167.
[n] E. T. d'Amico and G. Guignard, “Multi-Step Lining-up Correction of the CLIC Trajectory”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA8, pp. 3399-3401.
[n] S. Bassanese, A. Carniel, R. De Monte, M. Ferianis, and G. Gaio, “Timing System of the New Elettra Injector”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC153, pp. 3351-3353.
[n] W. Coosemans et al., “Determination of the Accuracy of Wire Position Sensors”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B08, pp. 406-408.
[n] Y. Sun, “Linear Scaling on Choosing a Bunch Compression Ratio for an FEL Driver”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO11, pp. 261-263.
[n] A. Bonucci, A. Conte, P. Manini, and S. Raimondi, “Measurement of the Sorption Characteristics of NEG Coated Pipes: The Transmission Factor Method”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH177, pp. 1432-1434.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Borland, V. Sajaev, and Y. Sun, “A Seven-bend-achromat Lattice as a Potential Upgrade for the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO07, pp. 249-251.
- R. Assmann, B. Dehning, and J. Matheson, “Use of Movable Beam Position Monitors for Beam Size Measurements”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A01, pp. 1693-1695.
- M. S. Zisman, R. B. Yourd, and H. Hsieh, “Design of the PEP-II Low-Energy Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA05, pp. 533-535.
- R. G. K. Hart, F. O. G. Bauer, P-F. Giraud, H. L. Groenstege, and H. van der Graaf, “The ATLAS Barrel Alignment Readout System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP080, pp. 266-268.
- Y. Sun and M. Borland, “Achieving A Quasi Third Order Achromat in APS Upgrade Lattice”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO13, pp. 267-269.
- Y. I. Levinsen, H. Burkhardt, A. Macpherson, M. Pereira, and S. X. Roe, “Fill Analysis and Experimental Background Observations in the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ020, pp. 1846-1848.
- P. Sprangle, C. M. Tang, and A. Ting, “Radiation Focusing, Guiding and Steering in Free Electron Lasers”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 189-194.
- H. Nakai et al., “Cryogenic System for the KEKB Crab Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP04, pp. XX-XX.
- M. Fukuda, K. Arakawa, T. Karasawa, and S. Okumura, “External Beam Phase Width Measurements at the JAERI AVF Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 548-551.
- J. L. Fricke, B. Piosczyk, and J. E. Vetter, “Measurements on the First Section of the Superconducting Proton Linac at Karlsruhe”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper F06, pp. 151-155.
- P. Grosse-Wiesmann, G. Coignet, C. D. Johnson, R. Schmidt, W. Weingarten, and L. Wood, “Linac - Ring - Collider B-Factory”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 383-386.
- Y. Ohnishi, H. Koiso, A. Morita, K. Oide, and H. Sugimoto, “Lattice Design of Low Emittance and Low Beta Function at Collision Point for SuperKEKB”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ007, pp. 3693-3695.
- J. R. Calvey et al., “CesrTA Retarding Field Analyzer Measurements in Drifts, Dipoles, Quadrupoles and Wigglers”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD023, pp. 1973-1975.
- L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397.
- H. Nakayama et al., “Beam Background and MDI Design for SuperKEKB/Belle-II”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ010, pp. 3702-3704.
- H. J. Qian et al., “RF DESIGN AND HIGH POWER TESTS OF A NEW TSINGHUA PHOTOCATHODE RF GUN”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD55, pp. 165-167.
- E. T. d'Amico and G. Guignard, “Multi-Step Lining-up Correction of the CLIC Trajectory”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA8, pp. 3399-3401.
- S. Bassanese, A. Carniel, R. De Monte, M. Ferianis, and G. Gaio, “Timing System of the New Elettra Injector”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC153, pp. 3351-3353.
- W. Coosemans et al., “Determination of the Accuracy of Wire Position Sensors”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B08, pp. 406-408.
- Y. Sun, “Linear Scaling on Choosing a Bunch Compression Ratio for an FEL Driver”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO11, pp. 261-263.
- A. Bonucci, A. Conte, P. Manini, and S. Raimondi, “Measurement of the Sorption Characteristics of NEG Coated Pipes: The Transmission Factor Method”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH177, pp. 1432-1434.
Back to search