JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. Schulte, P. Eliasson, and A. Latina, “Dynamic Effects During Beam-Based Alignment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN062, pp. 2847-2849. 
[n]	J. P. Koutchouk and A. Verdier, “Developments of the LEP Low-beta Optics Configuration”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1494-1497. 
[n]	A. H. Botha et al., “Present Status and New Developments at NAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6A14, pp. 533-535. 
[n]	J. Feikes et al., “Observation of Ion Induced Effects and their Impact on the Performance of the MLS Electron Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP004, pp. 1090-1092. 
[n]	T. Enegren, R. Burge, and D. A. Dohan, “A Modular RF Control System at TRIUMF”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 550-553. 
[n]	S. Schneider and P. F. Rohwer, “The Design and Performance of the Beam Injection and Extraction Systems of the NAC Separated-Sector Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-03, pp. 476-479. 
[n]	S. A. Martin, E. Zaplatin, P. F. Meads, G. W??stefeld, and K. Ziegler, “Study of an FFAG Synchrocyclotron for a Pulsed Neutron Source”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XII-02, pp. 701-704. 
[n]	T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425. 
[n]	G. Skripka, ?à. Andersson, A. M. Mitrovic, P. F. Tavares, F. J. Cullinan, and R. Nagaoka, “Commissioning of the Harmonic Cavities in the MAX IV 3 GeV Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2911-2913. doi:10.18429/JACoW-IPAC2016-WEPOW035
[n]	G. Kube et al., “PETRA III Diagnostics Beamline for Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD089, pp. 909-911. 
[n]	J. L. Conradie, J. C. Cornell, and D. T. Fourie, “Transfer Beamlines for ECR and Polarized-Ion Sources for a New Injector Cyclotron at NAC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-01, pp. 376-379. 
[n]	W. Namkung et al., “Status of PLS 2-GeV Linear Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 501-504. 
[n]	H. Aksakal, J. Resta-Lopez, and F. Zimmermann, “Laser Collimation for Linear Colliders”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN065, pp. 2856-2858. 
[n]	S. Y. Noh, S. D. Chang, J. G. Hwang, G. Hahn, and T. K. Yang, “The Development of Scintillating Screen Detector for Beam Monitoring at the KHIMA Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 244-247. doi:10.18429/JACoW-IPAC2016-MOPMR010
[n]	S. C. Kim et al., “A Beam Position Monitor System for Beam Transport Line (BTL) at the PLS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15019, pp. XX-XX. 
[n]	J. J. Kritzinger, A. H. Botha, P. M. Cronje, P. R. de Kock, R. E. F. Fenemore, and M. J. van Niekerk, “Pulse Selection and Rebunching in the NAC Transfer Beamline”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-15, pp. 384-387. 
[n]	R. Baartman, K. R. Kendall, M. McDonald, D. R. Mosscrop, P. W. Schmor, and D. Yuan, “A New High Intensity DC H- Ion Source for TRIUMF”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-40, pp. 352-354. 
[n]	R. Olsen and H. Langenbach, “High Precision Power Supplies for the National Synchrotron Light Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1408-1410. 
[n]	A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_020. 
[n]	L. Perrot, M. Kemel, and S. Rousselot, “Benchmark Analyses of Electrostatic Devices for SPIRAL2-DESIR Beam Lines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3225-3227. doi:10.18429/JACoW-IPAC2018-THPAK009
[n]	P. Buaphad et al., “6/9 MeV S-band Standing Wave Accelerating Structure for Container X-ray Inspection System at RTX”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1924-1926. doi:10.18429/JACoW-IPAC2016-TUPOY010
[n]	P. Ninin, “IEC 61508 Experience for the Development of the LHC Functional Safety Systems and Future Perspectives”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC004, pp. 400-402. 
[n]	J. Nguyen Xuan and V. Baggiolini, “A Testbed for Validating the LHC Controls System Core Before Deployment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS003, pp. 977-980. 
[n]	A. Gotz, E. T. Taurel, P. V. Verdier, and G. Abeille, “TANGO - Can ZMQ Replace CORBA ?”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB07, pp. 964-968. 
[n]	Y. Kobayashi, A. Araki, and Y. Kamiya, “A Test of a 3-GeV Operation at the Photon Factory Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 483-486. 
[n]	W. Namkung et al., “Status of PLS 2 GeV Linac Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 575-578. 
[n]	J. M. Jowett, J.-B. Jeanneret, and K. Schindl, “Heavy Ion Beams in the LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB029, pp. 1682-1684. 
[n]	A. Kisiel et al., “BPM Based Optics Correction of the Solaris 1.5 GeV Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 836-839. doi:10.18429/JACoW-IBIC2016-WEPG78
[n]	L. Bottura et al., “First Field Test of FiDeL the Magnetic Field Description for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP046, pp. 241-243. 
[n]	C. De Martinis et al., “Beam Tests on a Proton Linac Booster for  Hadrontherapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI095, pp. 2727-2729. 
[n]	M. Abbaslou, M. Marchetto, P. Kolb, R. Laxdal, and T. Junginger, “Beam dynamics design for a proton Linac for a compact accelerator based neutron source”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB090, unpublished. 
[n]	P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 401-404. doi:10.18429/JACoW-ICALEPCS2015-MOPGF136
[n]	M. Yoon, J. Choi, G. H. Kim, and T. Lee, “Closed Orbit Distortion and Correction of the PLS 2 GeV Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 646-649. 
[n]	T. Capshew, J. C. Collins, D. DuPlantis, D. W. Frame, J. Graham, and D. D. Reid, “The IUCF High Intensity Polarized Ion Source Control System”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-02, pp. 641-643. 
[n]	U. Schryber et al., “Upgrading the PSI Accelerator Facility for High Intensity Operation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 173-176. 
[n]	A. Salom, F. Perez, R. Lindvall, L. Malmgren, A. M. Milan, and A. M. Mitrovic, “Digital LLRF for MAX IV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4037-4039. doi:10.18429/JACoW-IPAC2017-THPAB135
[n]	T. Hakulinen, F. Havart, P. Ninin, and F. Valentini, “Building an Interlock: Comparison of Technologies for Constructing Safety Interlocks”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 389-392. doi:10.18429/JACoW-ICALEPCS2015-MOPGF132
[n]	T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221. 
[n]	C. W. Park, D. H. An, and H. Yim, “Beam Tracking on the High Energy Beam Transport Line in KHIMA Medical Machine”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3302-3304. doi:10.18429/JACoW-IPAC2016-THPMB033
[n]	S. Sarkar, P. Bennett, Y. Miles, M. Mouat, A. Purvis, and W. Roberts, “Vax Q-Bus to CAMAC Systems Crate Interface for Long Camac Branches”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1690-1693. 
[n]	S. Adam, “The Isochronism in the SIN 590-MeV Ring Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-16, pp. 283-286. 
[n]	B. Podobedov, B. Kushner, S. Ramamoorthy, Y. Tang, and E. Zitvogel, “Fast Digital Orbit Feedback Systems at NSLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPA005, pp. 396-398. 
[n]	D. Einfeld, “Status of the ALBA Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN066, pp. 1073-1075. 
[n]	H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179. 
[n]	K. Crandall, “Error Studies Using PARTRACE, a New Program that Combines PARMILA and TRACE 3-D”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-13, pp. 335-337. 
[n]	T. Hakulinen, P. Ninin, F. Valentini, J. Gonzalez, and C. Salatko-Petryszcze, “CERN Safety System Monitoring - SSM”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU030, pp. 1134-1137. 
[n]	H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422. 
[n]	G. N. Kim et al., “Pulsed Neutron Source using 100-MeV Electron Linac at Pohang Accelerator Laboratory”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP150, pp. 2593-2595. 
[n]	K. M. Ha et al., “PLS Fully Digital Controlled Corrector Power Supplies”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_045. 
[n]	A. I. Wawrzyniak, “Opening of IBIC2022”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper MOOI1, unpublished. 
[n]	Y. B. Kong, M. G. Hur, E. J. Lee, J. H. Park, H. S. Song, and S. D. Yang, “Deep Learning Based Predictive Control for RFT-30 Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2230-2232. doi:10.18429/JACoW-IPAC2018-WEPAL030

For LaTeX

Use Complete Form

For BibTeX

References

Back to search