Favourites
For Word
[n] S. Henrotin et al., “Commissioning and Testing of the First IBA S2C2”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 178-180. doi:10.18429/JACoW-Cyclotrons2016-TUP07
[n] H. Kaiser et al., “Hydroforming of Back Extruded Niobium Tubes”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP042, pp. 528-531.
[n] O. B. Malyshev and W. Bruns, “ILC DR Vacuum Design and E-cloud”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP057, pp. 673-675.
[n] J. V. E. Matoso, J. P. S. Furtado, J. P. B. Ishida, and T. R. Silva Soares, “Improvements on Kinematics and Control of Granite Benches at LNLS-Sirius”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 485-488. doi:10.18429/JACoW-ICALEPCS2023-TUPDP005
[n] A. Makhankov et al., “An Accelerator-based Thermal Neutron Source for BNCT Application”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT111, pp. 2745-2747.
[n] J. Bosser, J. Dieperink, G. Ferioli, J. Mann, and L. Warstki, “Time-Dependent Structure and Spill Measurements of Proton Beams at the CERN SPS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1905-1908.
[n] F. Caspers et al., “A Novel Technique for Mitigating Multipactor by Means of Magnetic Surface Roughness”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP011, pp. 830-832.
[n] N. I. Moseiko et al., “Upgrade System of Vacuum Monitoring of Synchrotron Radiation Sources of National Research Centre Kurchatov Institute”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC050, pp. 1183-1185.
[n] J. J. Song, S. O. Brauer, Y. W. Kang, R. L. Kustom, and A. Nassiri, “HOM (Higher-Order Mode) Damper Tests of Advanced Photon Source Storage Ring Cavity with a 20 MeVe- Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1277-1280.
[n] G. J. Portmann, W. J. Corbett, and A. Terebilo, “An Accelerator Control Middle Layer Using Matlab”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT077, pp. 4009-4011.
[n] N. L. Leicester et al., “Development and Testing of Split 6 GHz Cavities With Niobium Coatings”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 51-55. doi:10.18429/JACoW-SRF2023-MOPMB001
[n] E. Rial et al., “Undulators for BESSY III”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1219-1222. doi:10.18429/JACoW-IPAC2023-MOPM103
[n] W. J. Brown, K. E. Kreischer, M. Pedrozzi, M. A. Shapiro, R. J. Temkin, and X. Wan, “A High Gradient 17 GHz RF Gun for the Production of High Brightness Electron Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOCR5, pp. 81-83.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Henrotin et al., “Commissioning and Testing of the First IBA S2C2”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 178-180.
- H. Kaiser et al., “Hydroforming of Back Extruded Niobium Tubes”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP042, pp. 528-531.
- O. B. Malyshev and W. Bruns, “ILC DR Vacuum Design and E-cloud”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP057, pp. 673-675.
- J. V. E. Matoso, J. P. S. Furtado, J. P. B. Ishida, and T. R. Silva Soares, “Improvements on Kinematics and Control of Granite Benches at LNLS-Sirius”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP005, pp. 485-488.
- A. Makhankov et al., “An Accelerator-based Thermal Neutron Source for BNCT Application”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT111, pp. 2745-2747.
- J. Bosser, J. Dieperink, G. Ferioli, J. Mann, and L. Warstki, “Time-Dependent Structure and Spill Measurements of Proton Beams at the CERN SPS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1905-1908.
- F. Caspers et al., “A Novel Technique for Mitigating Multipactor by Means of Magnetic Surface Roughness”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP011, pp. 830-832.
- N. I. Moseiko et al., “Upgrade System of Vacuum Monitoring of Synchrotron Radiation Sources of National Research Centre Kurchatov Institute”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC050, pp. 1183-1185.
- J. J. Song, S. O. Brauer, Y. W. Kang, R. L. Kustom, and A. Nassiri, “HOM (Higher-Order Mode) Damper Tests of Advanced Photon Source Storage Ring Cavity with a 20 MeVe- Beam”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1277-1280.
- G. J. Portmann, W. J. Corbett, and A. Terebilo, “An Accelerator Control Middle Layer Using Matlab”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT077, pp. 4009-4011.
- N. L. Leicester et al., “Development and Testing of Split 6 GHz Cavities With Niobium Coatings”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB001, pp. 51-55.
- E. Rial et al., “Undulators for BESSY III”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM103, pp. 1219-1222.
- W. J. Brown, K. E. Kreischer, M. Pedrozzi, M. A. Shapiro, R. J. Temkin, and X. Wan, “A High Gradient 17 GHz RF Gun for the Production of High Brightness Electron Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOCR5, pp. 81-83.
Back to search
