Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. A. Miller et al., “Design and Performance of the Biased Drift Tube System in the BNL Electron Lens”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF31, pp. 291-294.
[n] R. L. Liu et al., “Design and Commissioning of LLRF System for ADS Project in China”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2752-2754. doi:10.18429/JACoW-IPAC2016-WEPOR036
[n] A. Drozhdin, Y. Irie, N. Mokhov, N. Nakao, M. Shirakata, and M. Uota, “Radiation and Residual Dose Rate Induced by the Beam Loss at Various Injection Energies”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B01, pp. 2402-2404.
[n] R. Duperrier et al., “Beam Dynamics Studies in SPIRAL II Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB034, pp. 2802-2804.
[n] V. M. Biryukov et al., “A Study of the RHIC Crystal Collimation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP37C, pp. 2146-2148.
[n] X. C. Kong et al., “The CSNS Controls Plan”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB15, pp. 196-198.
[n] F. Christie, J. Roensch-Schulenburg, S. Schreiber, and M. Vogt, “Generation of Ultra-Short Electron Bunches and FEL Pulses and Characterization of Their Longitudinal Properties at FLASH2”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2600-2603. doi:10.18429/JACoW-IPAC2017-WEPAB017
[n] H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
[n] W. Fischer et al., “Status of the RHIC Head-on Beam-beam Compensation Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC026, pp. 513-515.
[n] F. Marti et al., “High Intensity Operation of a Superconducting Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-03, pp. 45-48.
[n] W. Zhang et al., “Pulsed Systems for eRHIC Beam Injection and Extraction”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2410-2412. doi:10.18429/JACoW-IPAC2018-WEPMF020
[n] Y. Li, D. Jia, S. Xue, M. Zhang, and W. Zhu, “A High Heat Load Front-End for the Superconducting Wiggler Beamline at SSRF”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 327-329. doi:10.18429/JACoW-MEDSI2016-WEPE07
[n] H. Sako, M. Ikegami, T. Morishita, and S. Sato, “Configuration of Beam Profile Monitors for Energy Upgraded J-PARC Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP061, pp. 3847-3849.
[n] J. Pfingstner, E. Adli, E. Marin, and S. Reiche, “Design of a Terahertz Radiation Source for Pump-Probe Experiments”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4073-4076. doi:10.18429/JACoW-IPAC2018-THPMF016
[n] Z. He et al., “Control Systems for Spallation Target in China Initiative Accelerator Driven System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1147-1150. doi:10.18429/JACoW-ICALEPCS2015-THHD3O01
[n] H. Saugnac et al., “Cryogenic Installation Status of the ``CRYHOLAB'' Test Facility”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ007, pp. XX-XX.
[n] A. A. Mikhailichenko, “Space Charge Effects in Diluted Beam”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA106, pp. 3636-3638.
[n] X. D. He, S. Dong, G. Feng, Y. J. Pei, and C.-F. Wu, “Development of an X-band Hybrid Dielectric-iris-loaded Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP083, pp. 2713-2715.
[n] J. Popielarski et al., “FRIB Technology Demonstration Cryomodule Test”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB090, pp. 386-388.
[n] G. Jackson, “Commercial Production and Use of Antiprotons”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper FRXGB003, pp. 119-123.
[n] E. Takeshita et al., “Semi-nondestructive Monitoring System for High-energy Beam Transport Line at HIMAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD055, pp. 3218-3220.
[n] Z. P. Li, S. Dong, X. D. He, and C.-F. Wu, “Development of X-band Photonic Band Gap Accelerating Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP103, pp. 3041-3043.
[n] F. Meng, A. Romanenko, and Y. Xie, “Thermal Simulations for the Multi-Layer Coating Model”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP090, pp. 674-677.
[n] F. A. Stevie, D. P. Griffis, Z. Zhu, G. R. Myneni, and P. Kneisel, “Contaminant Analysis of Polycrystalline and Single Crystal Niobium Used in Accelerator Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP56, pp. 379-381.
[n] P. He et al., “Preliminary Design of HEPS Storge Ring Vacuum Chambers and Components”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 52-55. doi:10.18429/JACoW-FLS2018-TUP2WD04
[n] E. Allaria et al., “Non-Standard Use of Laser Heater for FEL Control and THz Generation”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 566-568. doi:10.18429/JACoW-FEL2017-THB02
[n] J. Norem et al., “The Proton Driver for the $mumu$ Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W025, pp. 399-401.
[n] A. M. Lombardi, “The LINAC4 Project”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. XX-XX. doi:10.18429/JACoW-HB2016-MOAM2P20
[n] K. Noda et al., “Proposal of Carbon-beam Facility for Cancer Therapy in Japan”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT063, pp. 2634-2636.
[n] D. Raparia et al., “Reducing Losses and Emittance in High Intensity Linac at BNL”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD12, pp. 77-81.
[n] Y. L. Chi et al., “Klystron and Modulator Upgrade for BEPCII Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO451, pp. 157-159.
[n] M. Bai et al., “Polarized Proton Collisions at RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA007, pp. 600-600.
[n] S. Buhler et al., “Status Report of the TTF Capture Cavity Cryostat”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F28, pp. 689-693.
[n] V. Litvinenko et al., “Experience with IBS-suppression Lattice in RHIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP015, pp. 2557-2559.
[n] C. Johnstone and A. Garren, “Racetrack Shaped Muon Storage Rings for a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH059, pp. 3362-3364.
[n] N. Kanaya, Y. Tahara, S. Sato, and S. Suzuki, “Remote Equipment as Distributed Remote Objects using JAVA Remote Method Invocation for the 1.8 GeV TSRF Synchrotron Radiation Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO003, pp. 2019-2021.
[n] N. Saotome, T. Furukawa, T. Inaniwa, T. Kanai, K. Noda, and S. Sato, “Development of 3D Dose Verification System for Scanned Ion Beam at HIMAC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP130, pp. 1830-1832.
[n] G. L. Orlandi et al., “Characterization of Compressed Bunches in the SwissFEL Injector Test Facility”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF08, pp. 515-518.
[n] M. Ben Abdillah, P. Blache, F. Fournier, and H. Kraft, “Development of a Low-beta BPM for MYRTE Project”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 504-507. doi:10.18429/JACoW-IBIC2019-WEPP002
[n] A. Noda et al., “Low Energy Beam Transport and Matching Section under Space Charge Effect”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2423-2426.
[n] T. Stammbach, S. Adam, A. Mezger, P. A. Schmelzbach, and P. Sigg, “Cyclotron Performance and New Developments”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper FRXGB002, pp. 159-163.
[n] N. G. Reshetnyak et al., “Investigation on the Electron Beam Formation in the Magnetron Gun with a Secondary-Emission Cathode Using the Masgnetic System Based on Permanent Magnets”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC011, pp. 349-351.
[n] M. Wake, H. Piekarz, H. Sato, K. Takayama, and R. Yamada, “Force Free Design of Super-Ferric Beam Line Magnet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE020, pp. 1981-1983.
[n] N. Kobayashi, N. Kanaya, Y. Tahara, S. Suzuki, and S. Sato, “Performance Evaluation of the Remote Equipment using Distributed Remote Object for the 1.8-GeV TSRF Storage Ring”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP526, pp. XX-XX.
[n] R. Bossert et al., “Low Temperature Quench Performance of Fermilab Low Beta Insertion Quadrupoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP045G, pp. 2267-2269.
[n] S. Sato et al., “Developments of the Calibration Tools for Beam Position Monitor at J-PARC Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT043, pp. 2777-2779.
[n] O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 398-400. doi:10.18429/JACoW-Cyclotrons2016-FRB02
[n] N. Gelfand, C. Johnstone, T. Sen, and W. Wan, “Effect of the Beam-Beam Interactions on the Dynamic Aperture of the LHC at Collision”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP85, pp. 1677-1679.
For LaTeX
Use Complete Form
For BibTeX
References
- T. A. Miller et al., “Design and Performance of the Biased Drift Tube System in the BNL Electron Lens”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF31, pp. 291-294.
- R. L. Liu et al., “Design and Commissioning of LLRF System for ADS Project in China”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2752-2754.
- A. Drozhdin, Y. Irie, N. Mokhov, N. Nakao, M. Shirakata, and M. Uota, “Radiation and Residual Dose Rate Induced by the Beam Loss at Various Injection Energies”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B01, pp. 2402-2404.
- R. Duperrier et al., “Beam Dynamics Studies in SPIRAL II Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB034, pp. 2802-2804.
- V. M. Biryukov et al., “A Study of the RHIC Crystal Collimation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP37C, pp. 2146-2148.
- X. C. Kong et al., “The CSNS Controls Plan”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB15, pp. 196-198.
- F. Christie, J. Roensch-Schulenburg, S. Schreiber, and M. Vogt, “Generation of Ultra-Short Electron Bunches and FEL Pulses and Characterization of Their Longitudinal Properties at FLASH2”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2600-2603.
- H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
- W. Fischer et al., “Status of the RHIC Head-on Beam-beam Compensation Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC026, pp. 513-515.
- F. Marti et al., “High Intensity Operation of a Superconducting Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-03, pp. 45-48.
- W. Zhang et al., “Pulsed Systems for eRHIC Beam Injection and Extraction”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2410-2412.
- Y. Li, D. Jia, S. Xue, M. Zhang, and W. Zhu, “A High Heat Load Front-End for the Superconducting Wiggler Beamline at SSRF”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 327-329.
- H. Sako, M. Ikegami, T. Morishita, and S. Sato, “Configuration of Beam Profile Monitors for Energy Upgraded J-PARC Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP061, pp. 3847-3849.
- J. Pfingstner, E. Adli, E. Marin, and S. Reiche, “Design of a Terahertz Radiation Source for Pump-Probe Experiments”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4073-4076.
- Z. He et al., “Control Systems for Spallation Target in China Initiative Accelerator Driven System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1147-1150.
- H. Saugnac et al., “Cryogenic Installation Status of the ``CRYHOLAB'' Test Facility”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ007, pp. XX-XX.
- A. A. Mikhailichenko, “Space Charge Effects in Diluted Beam”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA106, pp. 3636-3638.
- X. D. He, S. Dong, G. Feng, Y. J. Pei, and C.-F. Wu, “Development of an X-band Hybrid Dielectric-iris-loaded Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP083, pp. 2713-2715.
- J. Popielarski et al., “FRIB Technology Demonstration Cryomodule Test”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB090, pp. 386-388.
- G. Jackson, “Commercial Production and Use of Antiprotons”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper FRXGB003, pp. 119-123.
- E. Takeshita et al., “Semi-nondestructive Monitoring System for High-energy Beam Transport Line at HIMAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD055, pp. 3218-3220.
- Z. P. Li, S. Dong, X. D. He, and C.-F. Wu, “Development of X-band Photonic Band Gap Accelerating Structure”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP103, pp. 3041-3043.
- F. Meng, A. Romanenko, and Y. Xie, “Thermal Simulations for the Multi-Layer Coating Model”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP090, pp. 674-677.
- F. A. Stevie, D. P. Griffis, Z. Zhu, G. R. Myneni, and P. Kneisel, “Contaminant Analysis of Polycrystalline and Single Crystal Niobium Used in Accelerator Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP56, pp. 379-381.
- P. He et al., “Preliminary Design of HEPS Storge Ring Vacuum Chambers and Components”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 52-55.
- E. Allaria et al., “Non-Standard Use of Laser Heater for FEL Control and THz Generation”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 566-568.
- J. Norem et al., “The Proton Driver for the $mumu$ Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W025, pp. 399-401.
- A. M. Lombardi, “The LINAC4 Project”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. XX-XX.
- K. Noda et al., “Proposal of Carbon-beam Facility for Cancer Therapy in Japan”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT063, pp. 2634-2636.
- D. Raparia et al., “Reducing Losses and Emittance in High Intensity Linac at BNL”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD12, pp. 77-81.
- Y. L. Chi et al., “Klystron and Modulator Upgrade for BEPCII Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO451, pp. 157-159.
- M. Bai et al., “Polarized Proton Collisions at RHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPA007, pp. 600-600.
- S. Buhler et al., “Status Report of the TTF Capture Cavity Cryostat”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F28, pp. 689-693.
- V. Litvinenko et al., “Experience with IBS-suppression Lattice in RHIC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP015, pp. 2557-2559.
- C. Johnstone and A. Garren, “Racetrack Shaped Muon Storage Rings for a Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH059, pp. 3362-3364.
- N. Kanaya, Y. Tahara, S. Sato, and S. Suzuki, “Remote Equipment as Distributed Remote Objects using JAVA Remote Method Invocation for the 1.8 GeV TSRF Synchrotron Radiation Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO003, pp. 2019-2021.
- N. Saotome, T. Furukawa, T. Inaniwa, T. Kanai, K. Noda, and S. Sato, “Development of 3D Dose Verification System for Scanned Ion Beam at HIMAC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP130, pp. 1830-1832.
- G. L. Orlandi et al., “Characterization of Compressed Bunches in the SwissFEL Injector Test Facility”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF08, pp. 515-518.
- M. Ben Abdillah, P. Blache, F. Fournier, and H. Kraft, “Development of a Low-beta BPM for MYRTE Project”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 504-507.
- A. Noda et al., “Low Energy Beam Transport and Matching Section under Space Charge Effect”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2423-2426.
- T. Stammbach, S. Adam, A. Mezger, P. A. Schmelzbach, and P. Sigg, “Cyclotron Performance and New Developments”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper FRXGB002, pp. 159-163.
- N. G. Reshetnyak et al., “Investigation on the Electron Beam Formation in the Magnetron Gun with a Secondary-Emission Cathode Using the Masgnetic System Based on Permanent Magnets”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC011, pp. 349-351.
- M. Wake, H. Piekarz, H. Sato, K. Takayama, and R. Yamada, “Force Free Design of Super-Ferric Beam Line Magnet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE020, pp. 1981-1983.
- N. Kobayashi, N. Kanaya, Y. Tahara, S. Suzuki, and S. Sato, “Performance Evaluation of the Remote Equipment using Distributed Remote Object for the 1.8-GeV TSRF Storage Ring”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP526, pp. XX-XX.
- R. Bossert et al., “Low Temperature Quench Performance of Fermilab Low Beta Insertion Quadrupoles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP045G, pp. 2267-2269.
- S. Sato et al., “Developments of the Calibration Tools for Beam Position Monitor at J-PARC Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT043, pp. 2777-2779.
- O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 398-400.
- N. Gelfand, C. Johnstone, T. Sen, and W. Wan, “Effect of the Beam-Beam Interactions on the Dynamic Aperture of the LHC at Collision”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP85, pp. 1677-1679.
Back to search