Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 187-190. doi:10.18429/JACoW-MEDSI2016-TUPE13
[n] R. Veness et al., “Overview of beam intensity issues and mitigations in the CERN-SPS fast wire scanners”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2248-2251. doi:10.18429/JACoW-IPAC2024-WEPG26
[n] W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 640-644. doi:10.18429/JACoW-ICALEPCS2015-WED3O01
[n] L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n] F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
[n] C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
[n] R. D. Ryne, “Advanced Computing Tools and Models for Accelerator Physics”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THYM03, pp. 2947-2951.
[n] C. Qian et al., “LECR5 Development and Status Report”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 6-9. doi:10.18429/JACoW-ECRIS2020-MOWZO02
[n] M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 476-478. doi:10.18429/JACoW-IPAC2014-MOPME046
[n] G. M. Bruhaug and K. Carlson, “The Design and Construction of a Resonance Control System for the IOTA RF Cavity”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 432-434. doi:10.18429/JACoW-NAPAC2016-TUPOA74
[n] G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 326-329.
[n] S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
[n] R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2624-2626. doi:10.18429/JACoW-IPAC2015-WEPWA053
[n] P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
[n] E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-54, pp. 578-579.
[n] P. Chevtsov and V. Vrankovic, “Magnet Measurement System Upgrade at PSI”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO032, pp. 111-113.
[n] L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] A. Ballarino, “Prospects for the use of HTS in High-field Magnets for Future Accelerator Facilities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 974-979. doi:10.18429/JACoW-IPAC2014-TUZB02
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] A. Matheisen et al., “Investigation on Cavity String Assembly and Repair”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO041, pp. 472-475.
[n] L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624.
[n] A. N. Johnson and R. Lange, “Evolutionary Plans For EPICS Version 3”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA003, pp. 364-366.
[n] U. Wienands et al., “Status of the High Energy Ring of the PEP II B-Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA04, pp. 530-532.
[n] K. E. Robins et al., “Operating Experience with the Heub Superconducting Dipoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1320-1323.
[n] G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE016, pp. 1972-1974.
[n] E. F. Wilson, “Machine History Viewer for the Integrated Computer Control System of the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC128, pp. 883-886.
[n] H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422.
[n] S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
[n] V. Gubaidulin, A. Gamelin, and R. Nagaoka, “Beam-ion Instabilities and Their Mitigation for SOLEIL II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2650-2653. doi:10.18429/JACoW-IPAC2023-WEPA004
[n] G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1321-1324.
[n] M. Zach et al., “Auxiliary Accelerating System for TRIUMF Cyclotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 973-976.
[n] E. Trakhtenberg, E. Gluskin, P. Den Hartog, T. Klippert, G. Wiemerslage, and S. Xu, “The Vacuum System for Insertion Devices at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP16, pp. 2072-2074.
[n] A. V. Tsakanian et al., “AREAL Solenoid, Dipole and Steering Magnets Design and Performance”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1223-1225. doi:10.18429/JACoW-IPAC2014-TUPRO078
[n] S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
[n] P. Catravas et al., “Beam Profile Measurement at 30 GeV using Optical Transition Radiation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA100, pp. 2111-2113.
[n] T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425.
For LaTeX
Use Complete Form
For BibTeX
References
- X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 187-190.
- R. Veness et al., “Overview of beam intensity issues and mitigations in the CERN-SPS fast wire scanners”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG26, pp. 2248-2251.
- W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 640-644.
- L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
- C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
- R. D. Ryne, “Advanced Computing Tools and Models for Accelerator Physics”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THYM03, pp. 2947-2951.
- C. Qian et al., “LECR5 Development and Status Report”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOWZO02, pp. 6-9.
- M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 476-478.
- G. M. Bruhaug and K. Carlson, “The Design and Construction of a Resonance Control System for the IOTA RF Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 432-434.
- G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 326-329.
- S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
- R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2624-2626.
- P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
- E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-54, pp. 578-579.
- P. Chevtsov and V. Vrankovic, “Magnet Measurement System Upgrade at PSI”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO032, pp. 111-113.
- L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- A. Ballarino, “Prospects for the use of HTS in High-field Magnets for Future Accelerator Facilities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 974-979.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- A. Matheisen et al., “Investigation on Cavity String Assembly and Repair”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO041, pp. 472-475.
- L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624.
- A. N. Johnson and R. Lange, “Evolutionary Plans For EPICS Version 3”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA003, pp. 364-366.
- U. Wienands et al., “Status of the High Energy Ring of the PEP II B-Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA04, pp. 530-532.
- K. E. Robins et al., “Operating Experience with the Heub Superconducting Dipoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1320-1323.
- G. Velev et al., “Measurements of Field Decay and Snapback Effect on Tevatron Dipole Magnets”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE016, pp. 1972-1974.
- E. F. Wilson, “Machine History Viewer for the Integrated Computer Control System of the National Ignition Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC128, pp. 883-886.
- H. K. Jeong, T. Lee, and M. Yoon, “Measurement of Beta and Dispersion Functions in the PLS Storage ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP092G, pp. 1420-1422.
- S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
- V. Gubaidulin, A. Gamelin, and R. Nagaoka, “Beam-ion Instabilities and Their Mitigation for SOLEIL II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA004, pp. 2650-2653.
- G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1321-1324.
- M. Zach et al., “Auxiliary Accelerating System for TRIUMF Cyclotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 973-976.
- E. Trakhtenberg, E. Gluskin, P. Den Hartog, T. Klippert, G. Wiemerslage, and S. Xu, “The Vacuum System for Insertion Devices at the Advanced Photon Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP16, pp. 2072-2074.
- A. V. Tsakanian et al., “AREAL Solenoid, Dipole and Steering Magnets Design and Performance”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1223-1225.
- S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-40, pp. 529-531.
- P. Catravas et al., “Beam Profile Measurement at 30 GeV using Optical Transition Radiation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA100, pp. 2111-2113.
- T. Lee and M. Yoon, “Measurement and Control of Linear Coupling in the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP093G, pp. 1423-1425.
Back to search