Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Grames et al., “Positron beams at Ce+BAF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 896-899. doi:10.18429/JACoW-IPAC2023-MOPL152
[n] H. Eickhoff, Th. Haberer, and R. Steiner, “Accelerator Control for the GSI Cancer Therapy Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06C, pp. 2348-2350.
[n] H. A. Grunder, “CEBAF Commissioning and Future Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MAD01, pp. 1-3.
[n] A. Y. Molodozhentsev, G. Korn, L. Pribyl, and A. R. Maier, “LWFA-driven" Free Electron Laser for ELI-Beamlines"”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 62-67. doi:10.18429/JACoW-FLS2018-TUA2WC02
[n] N. N. Alexeev et al., “Development of MHF Conception at ITEP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 74-78. doi:10.18429/JACoW-RUPAC2016-WEYMH01
[n] D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073.
[n] V. Auslender et al., “Industrial Electron Accelerators Type ILU”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP017, pp. 1572-1574.
[n] A. Bellandi, M. Buechler, L. Butkowski, B. Dursun, C. Gumus, and J. Branlard, “A MTCA.4-based resonance controller for superconducting cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4164-4167. doi:10.18429/JACoW-IPAC2023-THPA090
[n] M. Dutine et al., “Concept of a Beam Diagnostics System for the Multi-Turn ERL Operation at the S-DALINAC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 254-256. doi:10.18429/JACoW-IPAC2022-MOPOPT012
[n] C. Bracco et al., “Leakage from LHC Dump Protection System”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD48, pp. 176-179.
[n] J. Bisognano et al., “Wisconsin SRF Electron Gun Commissioning”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA19, pp. 622-624.
[n] W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3277-3280.
[n] R. W. Allison et al., “Digital Control of the Bevatron-Injector Inflection Trajectory”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IX-07, pp. 483-490.
[n] S. T. Melnychuk, “Beam Emittance, Transmission and Intensity Distribution Measurements of the Northrop Grumman Corporation 1.76 MeV Pulsed Beamline and Contraband Detection System Target Test Facility”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP57, pp. 476-478.
[n] D. P. Weygand, “Artificial Intelligence and Accelerator Control”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 564-567.
[n] P. Alvarez, J. C. Bau, S. Deghaye, I. Kozsar, J. Serrano, and J. H. Lewis, “The CERN LHC Central Timing, a Vertical Slice”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOAA03, pp. 711-713.
[n] K. L. Erdman, A. Prochazka, O. K. Fredriksson, R. Thomas, M. Brobeck Associates, and W. A. Grundman, “A 'Square Wave' RF System Design for the TRIUMF Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A12, pp. XX-XX.
[n] J. Sandberg et al., “Control and Performance of the AGS and AGS Booster Main Magnet Power Supplies”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1277-1280.
[n] M. V. Fisher, L. Assoufid, J. L. McChesney, J. Qian, R. Reininger, and F. M. Rodolakis, “Minimizing Grating Slope Errors in the IEX Monochromator at the Advanced Photon Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 336-338. doi:10.18429/JACoW-MEDSI2016-WEPE14
[n] H. Padamsee et al., “Superconducting RF Activities at Cornell University”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A02, pp. XX-XX.
[n] V. Rodin et al., “Evaluation of Power Deposition in HL-LHC with Crystal-assisted Heavy Ion Collimation”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 236-240. doi:10.18429/JACoW-HB2023-WEC2C1
[n] E. Hoyer et al., “Wigglers at the Advanced Light Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ24, pp. 1444-1446.
[n] A. Dworak and J. C. Bau, “Decoupling CERN Accelerators”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 608-611. doi:10.18429/JACoW-ICALEPCS2017-TUPHA084
[n] J. Y. Tang et al., “Preliminary Accelerator Design of a Circular Higgs Factory in China”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA03, pp. 523-525.
[n] T. Tajima, A. Canabal, T. A. Harden, and R. J. Roybal, “Conceptual Design of Automated Systems for SRF Cavity Optical Inspection and Assembly”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP158, pp. 922-924.
[n] P. Chu, S. Chevtsov, G. B. Shen, and J. Wu, “Service Oriented Architecture for High Level Applications”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC072, pp. 1886-1888.
[n] C. Dickey et al., “EPICS at Duke University”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA11, pp. 2217-2219.
[n] T. Schenkel, W. G. Greenway, S. M. Lidia, K. Murphy, W. L. Waldron, and C. D. Weis, “Commissioning and Initial Experiments on NDCX-II”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC19, pp. 108-110.
[n] T. C. Fan, C. S. Hwang, and F. Y. Lin, “The Dynamic Effect of the Vertical Field Corrector of the 1.8 T Wiggler”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP117G, pp. 2561-2563.
[n] W. Joho, “High Intensity Problems in Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EI-03, pp. 337-347.
[n] V. Lapko, I. Mondrus, and N. Nasonov, “Positron Source Employing Crystalline Radiator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1492-1495.
[n] A. Kosrmlj, R. Sabjan, I. Verstovsek, K. Zagar, and G. Pajor, “Systematic Production of Beamline and Other Turnkey Control Systems”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB14, pp. 632-634.
[n] F. Lackner et al., “Status of the low-Z SPS slow extraction electrostatic septum development”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB058, unpublished.
[n] P. Wang et al., “Status Report on the Duke FEL Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH325, pp. 2819-2820.
[n] L. Steder and D. Reschke, “Statistical Analysis of the 120??C Bake Procedure of Superconducting Radio Frequency Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 444-447. doi:10.18429/JACoW-SRF2019-TUP020
[n] G. Lawler et al., “Effects of bulk material properties on RF surface resistivity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1422-1424. doi:10.18429/JACoW-IPAC2023-TUPA038
[n] A. Jain et al., “Field Calculation and Measurement of a Full-Length Snake Magnet for RHIC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05F, pp. 2005-2007.
[n] T. Mey et al., “Measurement of Wigner Distribution Function for Beam Characterization of FELs”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO57, pp. 92-96.
[n] R. G. Jacobsen and T. Mattison, “Beam-Loss Monitors in the SLC Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1539-1542.
[n] I. Kriznar et al., “The Upgrade of the ANKA Control System to ACS (Advanced Control System)”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP541, pp. XX-XX.
[n] N. Kurita, D. Martin, S. Smith, C. Ng, M. Nordby, and C. Perkins, “Design of the Button Beam Position Monitor for PEP-II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ25, pp. 2512-2514.
[n] J. A. Holmes, V. Danilov, J. D. Galambos, A. V. Fedotov, and R. L. Gluckstern, “Resonant Beam Response in the PSR Accumulator Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH305, pp. 3188-3190.
[n] A. Augustinus, M. Boccioli, P. Ch. Chochula, L. S. Jirden, and G. De Cataldo, “Finite State Machines for Integration and Control in ALICE”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB21, pp. 650-652.
[n] P. Bertrand et al., “SPIRaL: A Radioactive Ion Beam Facility at GANIL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1789-1792.
[n] J. Pforr et al., “Setup for Beam Profile Measurements using Optical Transition Radiation”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 494-497. doi:10.18429/JACoW-IBIC2018-WEPC04
[n] N. R. Lobanov, P. Linardakis, D. Tsifakis, and T. Tunningley, “Ultra High Impedance Diagnostics of Electrostatic Accelerators with Improved Resolution”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper THM2C01, pp. 282-284.
[n] J. Dilly et al., “Status of the CERN optics measurement and correction analysis tools”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM012, unpublished.
[n] J. Staples, D. Oshatz, and T. Saleh, “Design of the SNS MEBT”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD18, pp. 250-252.
[n] D. Frachon, P. M. Ivanov, E. A. Medvedko, I. Vasserman, O. Despe, and Y. G. Kang, “Results of Magnetic Measurements and Field Integral Compensation for the Elliptical Multipole Wiggler”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ18, pp. 1429-1431.
[n] M. J. Lamm et al., “A New Facility to Test Superconducting Accelerator Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P003, pp. 3395-3397.
[n] H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957.
[n] A. V. Savilov, I. V. Bandurkin, V. L. Bratman, A. K. Kaminsky, N. Yu. Peskov, and S. N. Sedykh, “Terahertz Electron Masers with Frequency Multiplication”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC77, pp. 420-423.
[n] H. Lengeler et al., “RF - Superconductivity at CERN”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-2, pp. XX-XX.
[n] F. Lackner et al., “A novel approach to qualify the straightness of electrostatic septa for the SPS slow extraction”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB057, unpublished.
[n] M. Aiba et al., “Study of Beam Based Alignment and Orbit Feedback for SwissFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPA08, pp. 588-591.
[n] H. Vormann, W. A. Barth, M. Miski-Oglu, U. Scheeler, M. Vossberg, and S. Yaramyshev, “High Intensity Heavy Ion Beam Optimization at GSI UNILAC”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 110-113. doi:10.18429/JACoW-LINAC2022-MOPOPA18
[n] H. L. Rutkowski, L. S. Engelhardt, S. Humphries, E. A. Meyer, H. Oona, and R. P. Shurter, “Ion Source Development for the Los Alamos Heavy Ion Fusion Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1742-1745.
[n] D. Humphries et al., “Design of End Magnetic Structures for the Advanced Light Source Wigglers”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ25, pp. 1447-1449.
[n] T. Sen, N. Gelfand, and M. Xiao, “Beam-Beam Interactions at the Tevatron in Run IIa”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH148, pp. 2008-2010.
[n] R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1344-1347.
[n] A. Ramezani Moghaddam, C. Cacho, and B. Singh, “Quasi-periodic Apple-knot undulator for Diamond Light Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1192-1195. doi:10.18429/JACoW-IPAC2023-MOPM093
[n] N. V. Mokhov, J. S. Kerby, I. L. Rakhno, and J. B. Strait, “Mitigation of Effects of Beam-Induced Energy Deposition in the LHC High-Luminosity Interaction Regions”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB064, pp. 1745-1747.
[n] M. Kadunc et al., “Deployment of Abeans Release 3 for the TINE Control System at DESY”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP506, pp. XX-XX.
[n] K. I. Tiedtke et al., “Challenges for Detection of Highly Intense FEL Radiation: Photon Beam Diagnostics at FLASH1 and FLASH2”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO81, pp. 417-420.
[n] K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
[n] P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101.
[n] B. Angerth et al., “The Cold Vacuum System of the Large Hadron Collider”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2467-2470.
[n] S. Schreiber, B. Faatz, J. Feldhaus, K. Honkavaara, and R. Treusch, “FLASH Operation as an FEL User Facility”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH3PBC04, pp. 3130-3132.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Grames et al., “Positron beams at Ce+BAF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL152, pp. 896-899.
- H. Eickhoff, Th. Haberer, and R. Steiner, “Accelerator Control for the GSI Cancer Therapy Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP06C, pp. 2348-2350.
- H. A. Grunder, “CEBAF Commissioning and Future Plans”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MAD01, pp. 1-3.
- A. Y. Molodozhentsev, G. Korn, L. Pribyl, and A. R. Maier, “LWFA-driven" Free Electron Laser for ELI-Beamlines"”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 62-67.
- N. N. Alexeev et al., “Development of MHF Conception at ITEP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 74-78.
- D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073.
- V. Auslender et al., “Industrial Electron Accelerators Type ILU”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP017, pp. 1572-1574.
- A. Bellandi, M. Buechler, L. Butkowski, B. Dursun, C. Gumus, and J. Branlard, “A MTCA.4-based resonance controller for superconducting cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA090, pp. 4164-4167.
- M. Dutine et al., “Concept of a Beam Diagnostics System for the Multi-Turn ERL Operation at the S-DALINAC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 254-256.
- C. Bracco et al., “Leakage from LHC Dump Protection System”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD48, pp. 176-179.
- J. Bisognano et al., “Wisconsin SRF Electron Gun Commissioning”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA19, pp. 622-624.
- W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3277-3280.
- R. W. Allison et al., “Digital Control of the Bevatron-Injector Inflection Trajectory”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IX-07, pp. 483-490.
- S. T. Melnychuk, “Beam Emittance, Transmission and Intensity Distribution Measurements of the Northrop Grumman Corporation 1.76 MeV Pulsed Beamline and Contraband Detection System Target Test Facility”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP57, pp. 476-478.
- D. P. Weygand, “Artificial Intelligence and Accelerator Control”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 564-567.
- P. Alvarez, J. C. Bau, S. Deghaye, I. Kozsar, J. Serrano, and J. H. Lewis, “The CERN LHC Central Timing, a Vertical Slice”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOAA03, pp. 711-713.
- K. L. Erdman, A. Prochazka, O. K. Fredriksson, R. Thomas, M. Brobeck Associates, and W. A. Grundman, “A 'Square Wave' RF System Design for the TRIUMF Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A12, pp. XX-XX.
- J. Sandberg et al., “Control and Performance of the AGS and AGS Booster Main Magnet Power Supplies”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1277-1280.
- M. V. Fisher, L. Assoufid, J. L. McChesney, J. Qian, R. Reininger, and F. M. Rodolakis, “Minimizing Grating Slope Errors in the IEX Monochromator at the Advanced Photon Source”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 336-338.
- H. Padamsee et al., “Superconducting RF Activities at Cornell University”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A02, pp. XX-XX.
- V. Rodin et al., “Evaluation of Power Deposition in HL-LHC with Crystal-assisted Heavy Ion Collimation”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC2C1, pp. 236-240.
- E. Hoyer et al., “Wigglers at the Advanced Light Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ24, pp. 1444-1446.
- A. Dworak and J. C. Bau, “Decoupling CERN Accelerators”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 608-611.
- J. Y. Tang et al., “Preliminary Accelerator Design of a Circular Higgs Factory in China”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA03, pp. 523-525.
- T. Tajima, A. Canabal, T. A. Harden, and R. J. Roybal, “Conceptual Design of Automated Systems for SRF Cavity Optical Inspection and Assembly”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP158, pp. 922-924.
- P. Chu, S. Chevtsov, G. B. Shen, and J. Wu, “Service Oriented Architecture for High Level Applications”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC072, pp. 1886-1888.
- C. Dickey et al., “EPICS at Duke University”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA11, pp. 2217-2219.
- T. Schenkel, W. G. Greenway, S. M. Lidia, K. Murphy, W. L. Waldron, and C. D. Weis, “Commissioning and Initial Experiments on NDCX-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC19, pp. 108-110.
- T. C. Fan, C. S. Hwang, and F. Y. Lin, “The Dynamic Effect of the Vertical Field Corrector of the 1.8 T Wiggler”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP117G, pp. 2561-2563.
- W. Joho, “High Intensity Problems in Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EI-03, pp. 337-347.
- V. Lapko, I. Mondrus, and N. Nasonov, “Positron Source Employing Crystalline Radiator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1492-1495.
- A. Kosrmlj, R. Sabjan, I. Verstovsek, K. Zagar, and G. Pajor, “Systematic Production of Beamline and Other Turnkey Control Systems”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB14, pp. 632-634.
- F. Lackner et al., “Status of the low-Z SPS slow extraction electrostatic septum development”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB058, this conference.
- P. Wang et al., “Status Report on the Duke FEL Facility”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH325, pp. 2819-2820.
- L. Steder and D. Reschke, “Statistical Analysis of the 120??C Bake Procedure of Superconducting Radio Frequency Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 444-447.
- G. Lawler et al., “Effects of bulk material properties on RF surface resistivity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA038, pp. 1422-1424.
- A. Jain et al., “Field Calculation and Measurement of a Full-Length Snake Magnet for RHIC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP05F, pp. 2005-2007.
- T. Mey et al., “Measurement of Wigner Distribution Function for Beam Characterization of FELs”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO57, pp. 92-96.
- R. G. Jacobsen and T. Mattison, “Beam-Loss Monitors in the SLC Final Focus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1539-1542.
- I. Kriznar et al., “The Upgrade of the ANKA Control System to ACS (Advanced Control System)”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP541, pp. XX-XX.
- N. Kurita, D. Martin, S. Smith, C. Ng, M. Nordby, and C. Perkins, “Design of the Button Beam Position Monitor for PEP-II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ25, pp. 2512-2514.
- J. A. Holmes, V. Danilov, J. D. Galambos, A. V. Fedotov, and R. L. Gluckstern, “Resonant Beam Response in the PSR Accumulator Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH305, pp. 3188-3190.
- A. Augustinus, M. Boccioli, P. Ch. Chochula, L. S. Jirden, and G. De Cataldo, “Finite State Machines for Integration and Control in ALICE”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB21, pp. 650-652.
- P. Bertrand et al., “SPIRaL: A Radioactive Ion Beam Facility at GANIL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1789-1792.
- J. Pforr et al., “Setup for Beam Profile Measurements using Optical Transition Radiation”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 494-497.
- N. R. Lobanov, P. Linardakis, D. Tsifakis, and T. Tunningley, “Ultra High Impedance Diagnostics of Electrostatic Accelerators with Improved Resolution”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper THM2C01, pp. 282-284.
- J. Dilly et al., “Status of the CERN optics measurement and correction analysis tools”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM012, this conference.
- J. Staples, D. Oshatz, and T. Saleh, “Design of the SNS MEBT”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD18, pp. 250-252.
- D. Frachon, P. M. Ivanov, E. A. Medvedko, I. Vasserman, O. Despe, and Y. G. Kang, “Results of Magnetic Measurements and Field Integral Compensation for the Elliptical Multipole Wiggler”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ18, pp. 1429-1431.
- M. J. Lamm et al., “A New Facility to Test Superconducting Accelerator Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P003, pp. 3395-3397.
- H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957.
- A. V. Savilov, I. V. Bandurkin, V. L. Bratman, A. K. Kaminsky, N. Yu. Peskov, and S. N. Sedykh, “Terahertz Electron Masers with Frequency Multiplication”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC77, pp. 420-423.
- H. Lengeler et al., “RF - Superconductivity at CERN”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-2, pp. XX-XX.
- F. Lackner et al., “A novel approach to qualify the straightness of electrostatic septa for the SPS slow extraction”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB057, this conference.
- M. Aiba et al., “Study of Beam Based Alignment and Orbit Feedback for SwissFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPA08, pp. 588-591.
- H. Vormann, W. A. Barth, M. Miski-Oglu, U. Scheeler, M. Vossberg, and S. Yaramyshev, “High Intensity Heavy Ion Beam Optimization at GSI UNILAC”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 110-113.
- H. L. Rutkowski, L. S. Engelhardt, S. Humphries, E. A. Meyer, H. Oona, and R. P. Shurter, “Ion Source Development for the Los Alamos Heavy Ion Fusion Injector”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1742-1745.
- D. Humphries et al., “Design of End Magnetic Structures for the Advanced Light Source Wigglers”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ25, pp. 1447-1449.
- T. Sen, N. Gelfand, and M. Xiao, “Beam-Beam Interactions at the Tevatron in Run IIa”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH148, pp. 2008-2010.
- R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1344-1347.
- A. Ramezani Moghaddam, C. Cacho, and B. Singh, “Quasi-periodic Apple-knot undulator for Diamond Light Source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM093, pp. 1192-1195.
- N. V. Mokhov, J. S. Kerby, I. L. Rakhno, and J. B. Strait, “Mitigation of Effects of Beam-Induced Energy Deposition in the LHC High-Luminosity Interaction Regions”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB064, pp. 1745-1747.
- M. Kadunc et al., “Deployment of Abeans Release 3 for the TINE Control System at DESY”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP506, pp. XX-XX.
- K. I. Tiedtke et al., “Challenges for Detection of Highly Intense FEL Radiation: Photon Beam Diagnostics at FLASH1 and FLASH2”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO81, pp. 417-420.
- K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
- P. Wang et al., “Beam Position Monitors for Duke FEL Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA93, pp. 2099-2101.
- B. Angerth et al., “The Cold Vacuum System of the Large Hadron Collider”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2467-2470.
- S. Schreiber, B. Faatz, J. Feldhaus, K. Honkavaara, and R. Treusch, “FLASH Operation as an FEL User Facility”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH3PBC04, pp. 3130-3132.
Back to search