Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. C. Chiu, J. Chen, Y. K. Chen, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Data Acquisition and Studies of Vibration Motion in TLS Beamlines”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL023, pp. 177-179.
[n] V. Guidi et al., “Highly Efficient Crystal Deflector for Channeling Extraction of a Proton Beam from Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB016, pp. 1655-1657.
[n] Y. Hao, Y. Luo, V. Ptitsyn, and J. Qiang, “Scaling Properties of the Synchro-Beta Resonance in Crab Crossing Scheme of Future Electron Ion Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 766-768. doi:10.18429/JACoW-IPAC2019-MOPRB082
[n] B. Beutner, “Bunch Compression Layout and Longitudinal Operation Modes for the SwissFEL Aramis Line”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD28, pp. 297-300.
[n] Y. Yuasa et al., “A Monitoring System for a Gas-Sheet Beam Profile Monitor on Linux with EPICS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP579, pp. XX-XX.
[n] V. I. Baranov et al., “Highly Efficient Deflection of the Divergent Beam by Bent Single Crystal”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG10, pp. 426-427.
[n] Y. T. Yan et al., “Virtual Accelerator for Accelerator Optics Improvement”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE058, pp. 3426-3428.
[n] J. Liu, H. B. Chen, J. Shi, X. W. Wu, and H. Zha, “Development of a High-Power X-Band RF Rotary Joint”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4224-4226. doi:10.18429/JACoW-IPAC2017-THPIK057
[n] S. A. Lewis et al., “Progress on a New Control System for the Bevalac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1645-1648.
[n] P. J. L. Heesterman, S. Griph, C. H. A. Hogben, D. Kinna, and K. Kneupner, “The JetFsm Data Acquisition Framework, and Proposed Usage for ITER”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP020, pp. 128-130.
[n] G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_042.
[n] N. P. Di Monte, “The P0 Feedback Control System Blurs the Line between IOC and FPGA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN113, pp. 431-433.
[n] I. R. Collins, O. Groebner, P. Lepeule, and R. Veness, “Mechanical and Vacuum Stability Design Criteria for the LHC Experimental Vacuum Chambers”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP19H, pp. 2202-2206.
[n] S. S. Gilardoni et al., “First Results for the Beam Commissioning of the CERN Multi-Turn Extraction”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP022, pp. 1578-1580.
[n] M. Cavenago, M. Morvillo, and A. M. Porcellato, “High Resolution Bead Technique Measurements and Multipole Analysis”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP036L, pp. 1982-1984.
[n] S. Doebert et al., “High Power Test of an X-band Slotted-Iris Accelerator Structure at NLCTA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN070, pp. 2191-2193.
[n] J. T. G. Wilson, “A Real-Time Data Logger for the MICE Superconducting Magnets”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO012, pp. 182-184.
[n] M. Y. Yoshida et al., “Design of the COMET Pion Capture Solenoid”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC030, pp. 4116-4118.
[n] S. E. Karnaev, E. V. Goman, O. A. Plotnikova, and E. A. Simonov, “The Database of the VEPP-4 Accelerating Facility Parameters”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW04, pp. 40-42.
[n] L. T. Campbell and B. W. J. McNeil, “Puffin: A Three Dimensional, Unaveraged Free Electron Laser Simulation Code”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD12, pp. 73-76.
[n] T. Fujisawa et al., “Design of the RF System of RIKEN SSC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper H04, pp. 311-314.
[n] M. Tejima et al., “Beam Position Monitor of the ATF-DR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-87, pp. 914-916.
[n] J. D. Fox et al., “Control of Intra-Bunch Vertical Instabilities at the SPS - Measurements and Technology Demonstration”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2005-2007. doi:10.18429/JACoW-IPAC2017-TUPIK119
[n] R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 145-148. doi:10.18429/JACoW-ICALEPCS2015-MOPGF025
[n] A. T. Visser, “Protective Relaying and Monitoring of the Ring Magnet Power Supply for the Argonne National Laboratory Zero Gradient Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 507-512.
[n] H. Guler, N. ElKamchi, P. Gauron, and H. Monard, “Control Command Strategy for the ThomX Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2284-2287. doi:10.18429/JACoW-IPAC2018-WEPAL048
[n] A. Parrella, M. P. Ramos, P. Arpaia, A. Liccardo, and M. C. L. Buzio, “Inverse Problem-Based Magnetic Characterization of Weekly Magnetic Alloys”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4722-4725. doi:10.18429/JACoW-IPAC2017-THPVA113
[n] O. V. Singh, J. Flannigan, and R. Nawrocky, “Automatic Local Beam Steering Systems for NSLS X-Ray Storage Ring - Design and Implementation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1528-1531.
[n] T. Hirose et al., “Vertical Emittance in the KEK Accelerator Test Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUDR5, pp. 256-258.
[n] M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117.
[n] D. A. Callahan and A. Bruce Langdon, “Transport of a Partially-Neutralized Ion Beam in a Heavy-Ion Fusion Reactor Chamber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPR01, pp. 3238-3240.
[n] K. S. White, “Managing Mayhem”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOCAULT01, pp. 24-26.
[n] R. B. Palmer et al., “Higher Luminosity eRHIC Ring-Ring Options and Upgrade”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2472-2474. doi:10.18429/JACoW-IPAC2016-WEPMW023
[n] A. Laisn?®, “The Orsay 200-MeV Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-15, pp. 99-102.
[n] J. E. Stovall, “An Automated Admittance Measurement at LAMPF”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P22, pp. 422-426.
[n] J. Watanabe et al., “Design and Cold Model Test of 500MHz Damped Cavity for ASP Storage Ring RF System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT049, pp. 3076-3078.
[n] K. Hwang and J. Qiang, “Numerical Shot Noise Modeling and Particle Migration Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4274-4276. doi:10.18429/JACoW-IPAC2018-THPMF084
[n] H.-S. Lee et al., “PAL-XFEL Linac RF System Status”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4369-4371. doi:10.18429/JACoW-IPAC2018-THPMK033
[n] R. Veness et al., “Design of a High-precision Fast Wire Scanner for the SPS at CERN”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB79, pp. 259-262.
[n] R. A. Kishek et al., “Benchmarking of Space Charge Codes Against UMER Experiments”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEA3MP03, pp. 263-266.
[n] J. P. Shanks, G. W. Codner, M. J. Forster, D. L. Rubin, S. Wang, and L. Ying, “Commissioning of the CESR Upgrade for CHESS-U”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 522-525. doi:10.18429/JACoW-NAPAC2019-TUPLH20
[n] W. Mori, J. M. Dawson, and C. Joshi, “A Plasma Wave Accelerator -- Surfatron II”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3244-3247.
[n] T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196.
[n] M.-P. Level et al., “Progress Report on the Construction of SOLEIL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE031, pp. 2203-2205.
[n] C. Piel, K. Dunkel, M. Pekeler, H. Vogel, and P. vom Stein, “Beam Operation of the SARAF Light Ion Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN011, pp. 1410-1412.
[n] R. Nagaoka, “Work carried out at the ESRF to Characterise and Correct the Coupling”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEZF105, pp. 131-135.
[n] J. Bordas, “The Spanish Project for a Synchrotron Laboratory at Barcelona LSB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOY03A, pp. 62-66.
[n] D. F. Ratner et al., “Harmonic Lasing at the LCLS”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO53, pp. 623-626.
[n] G. Fernandez Penacoba et al., “Outcome of the Commissioning of the Readout and Actuation Channels for the Cryogenics of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD040, pp. 2500-2502.
[n] L. Ahrens et al., “The RHIC Injector Accelerator Configurations, and Performance for the RHIC 2003 Au-d Physics Run”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB047, pp. 1715-1717.
[n] D. J. Larson et al., “Ion Optical Design of the BRF-FNAL-SAIC-UW PET Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V018, pp. 1403-1405.
For LaTeX
Use Complete Form
For BibTeX
References
- P. C. Chiu, J. Chen, Y. K. Chen, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Data Acquisition and Studies of Vibration Motion in TLS Beamlines”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL023, pp. 177-179.
- V. Guidi et al., “Highly Efficient Crystal Deflector for Channeling Extraction of a Proton Beam from Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB016, pp. 1655-1657.
- Y. Hao, Y. Luo, V. Ptitsyn, and J. Qiang, “Scaling Properties of the Synchro-Beta Resonance in Crab Crossing Scheme of Future Electron Ion Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 766-768.
- B. Beutner, “Bunch Compression Layout and Longitudinal Operation Modes for the SwissFEL Aramis Line”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD28, pp. 297-300.
- Y. Yuasa et al., “A Monitoring System for a Gas-Sheet Beam Profile Monitor on Linux with EPICS”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP579, pp. XX-XX.
- V. I. Baranov et al., “Highly Efficient Deflection of the Divergent Beam by Bent Single Crystal”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG10, pp. 426-427.
- Y. T. Yan et al., “Virtual Accelerator for Accelerator Optics Improvement”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE058, pp. 3426-3428.
- J. Liu, H. B. Chen, J. Shi, X. W. Wu, and H. Zha, “Development of a High-Power X-Band RF Rotary Joint”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4224-4226.
- S. A. Lewis et al., “Progress on a New Control System for the Bevalac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1645-1648.
- P. J. L. Heesterman, S. Griph, C. H. A. Hogben, D. Kinna, and K. Kneupner, “The JetFsm Data Acquisition Framework, and Proposed Usage for ITER”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP020, pp. 128-130.
- G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_042.
- N. P. Di Monte, “The P0 Feedback Control System Blurs the Line between IOC and FPGA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN113, pp. 431-433.
- I. R. Collins, O. Groebner, P. Lepeule, and R. Veness, “Mechanical and Vacuum Stability Design Criteria for the LHC Experimental Vacuum Chambers”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP19H, pp. 2202-2206.
- S. S. Gilardoni et al., “First Results for the Beam Commissioning of the CERN Multi-Turn Extraction”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP022, pp. 1578-1580.
- M. Cavenago, M. Morvillo, and A. M. Porcellato, “High Resolution Bead Technique Measurements and Multipole Analysis”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP036L, pp. 1982-1984.
- S. Doebert et al., “High Power Test of an X-band Slotted-Iris Accelerator Structure at NLCTA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN070, pp. 2191-2193.
- J. T. G. Wilson, “A Real-Time Data Logger for the MICE Superconducting Magnets”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO012, pp. 182-184.
- M. Y. Yoshida et al., “Design of the COMET Pion Capture Solenoid”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC030, pp. 4116-4118.
- S. E. Karnaev, E. V. Goman, O. A. Plotnikova, and E. A. Simonov, “The Database of the VEPP-4 Accelerating Facility Parameters”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOW04, pp. 40-42.
- L. T. Campbell and B. W. J. McNeil, “Puffin: A Three Dimensional, Unaveraged Free Electron Laser Simulation Code”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD12, pp. 73-76.
- T. Fujisawa et al., “Design of the RF System of RIKEN SSC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper H04, pp. 311-314.
- M. Tejima et al., “Beam Position Monitor of the ATF-DR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-87, pp. 914-916.
- J. D. Fox et al., “Control of Intra-Bunch Vertical Instabilities at the SPS - Measurements and Technology Demonstration”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2005-2007.
- R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 145-148.
- A. T. Visser, “Protective Relaying and Monitoring of the Ring Magnet Power Supply for the Argonne National Laboratory Zero Gradient Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 507-512.
- H. Guler, N. ElKamchi, P. Gauron, and H. Monard, “Control Command Strategy for the ThomX Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2284-2287.
- A. Parrella, M. P. Ramos, P. Arpaia, A. Liccardo, and M. C. L. Buzio, “Inverse Problem-Based Magnetic Characterization of Weekly Magnetic Alloys”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4722-4725.
- O. V. Singh, J. Flannigan, and R. Nawrocky, “Automatic Local Beam Steering Systems for NSLS X-Ray Storage Ring - Design and Implementation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1528-1531.
- T. Hirose et al., “Vertical Emittance in the KEK Accelerator Test Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUDR5, pp. 256-258.
- M. Yu, D. J. Harding, and G. Velev, “Dipole Corrector Magnets for the LBNE Beam Line”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP152, pp. 1115-1117.
- D. A. Callahan and A. Bruce Langdon, “Transport of a Partially-Neutralized Ion Beam in a Heavy-Ion Fusion Reactor Chamber”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPR01, pp. 3238-3240.
- K. S. White, “Managing Mayhem”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOCAULT01, pp. 24-26.
- R. B. Palmer et al., “Higher Luminosity eRHIC Ring-Ring Options and Upgrade”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2472-2474.
- A. Laisn?®, “The Orsay 200-MeV Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-15, pp. 99-102.
- J. E. Stovall, “An Automated Admittance Measurement at LAMPF”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P22, pp. 422-426.
- J. Watanabe et al., “Design and Cold Model Test of 500MHz Damped Cavity for ASP Storage Ring RF System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT049, pp. 3076-3078.
- K. Hwang and J. Qiang, “Numerical Shot Noise Modeling and Particle Migration Scheme”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4274-4276.
- H.-S. Lee et al., “PAL-XFEL Linac RF System Status”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4369-4371.
- R. Veness et al., “Design of a High-precision Fast Wire Scanner for the SPS at CERN”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB79, pp. 259-262.
- R. A. Kishek et al., “Benchmarking of Space Charge Codes Against UMER Experiments”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEA3MP03, pp. 263-266.
- J. P. Shanks, G. W. Codner, M. J. Forster, D. L. Rubin, S. Wang, and L. Ying, “Commissioning of the CESR Upgrade for CHESS-U”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 522-525.
- W. Mori, J. M. Dawson, and C. Joshi, “A Plasma Wave Accelerator -- Surfatron II”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3244-3247.
- T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196.
- M.-P. Level et al., “Progress Report on the Construction of SOLEIL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE031, pp. 2203-2205.
- C. Piel, K. Dunkel, M. Pekeler, H. Vogel, and P. vom Stein, “Beam Operation of the SARAF Light Ion Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN011, pp. 1410-1412.
- R. Nagaoka, “Work carried out at the ESRF to Characterise and Correct the Coupling”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEZF105, pp. 131-135.
- J. Bordas, “The Spanish Project for a Synchrotron Laboratory at Barcelona LSB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOY03A, pp. 62-66.
- D. F. Ratner et al., “Harmonic Lasing at the LCLS”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO53, pp. 623-626.
- G. Fernandez Penacoba et al., “Outcome of the Commissioning of the Readout and Actuation Channels for the Cryogenics of the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD040, pp. 2500-2502.
- L. Ahrens et al., “The RHIC Injector Accelerator Configurations, and Performance for the RHIC 2003 Au-d Physics Run”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB047, pp. 1715-1717.
- D. J. Larson et al., “Ion Optical Design of the BRF-FNAL-SAIC-UW PET Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V018, pp. 1403-1405.
Back to search