Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Baconnier, J. Gareyte, and P. Lefevre, “High Intensity Phenomena Observed in the CPS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1027-1032.
[n] P. Peiffer et al., “New Materials and Designs for Superconductive Insertion Devices”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP086, pp. 2471-2473.
[n] C. N. Boyer, W. W. Destler, and H. Kim, “Controlled Collective Field Propagation for Ion Acceleration Using a Slow Wave Structure”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1625-1628.
[n] V. O. Tkachenko et al., “High Power Electron Accelerator Prototype”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP016, pp. 1502-1504.
[n] C. Giloux, A. Hilaire, A. Ijspeert, F. Rodriguez-Mateos, R. Schmidt, and F. Sonnemann, “Protection of the Superconducting Corrector Magnets for the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A08, pp. 2163-2165.
[n] M. Konrad et al., “Design and Commissioning of a Multi-frequency Digital Low Level RF Control System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC151, pp. 433-435.
[n] E. Chesta et al., “Overview of CERN Technology Transfer Strategy and Accelerator-related Activities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA034, pp. 3702-3704.
[n] A. Araz, U. Bonnes, R. Eichhorn, F. Hug, M. Konrad, and A. Richter, “Development of an FPGA Based RF Control System For the S-DALINAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP026, pp. 718-720.
[n] A. Ijspeert and P. Sievers, “Recent Developments of Beam Dumps and Targets at the SPS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2841-2844.
[n] T. Niewodniczanski and E. Malwitz, “Mechanical Design Features of the UNILAC”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper E03, pp. 103-113.
[n] H.-D. Gr?ñf and A. Richter, “The Darmstadt Superconducting Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU2-02, pp. 231-236.
[n] C. Eckardt, U. Bonnes, J. Enders, Y. Fritzsche, and M. Wagner, “Wire Scanners for Emittance Measurements at the 100 keV Spin Polarized Electron Beam Line at the S-DALINAC”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG023, pp. 186-188.
[n] A. Thomson et al., “Optimisation of Electrical and Instrumentation Design for the Diamond Light Source DDBA Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 448-450. doi:10.18429/JACoW-IPAC2017-MOPAB133
[n] A. Denker et al., “Eye Tumour Therapy in Berlin”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA002, pp. 64-66.
[n] V. V. Podlevskih, A. V. Antoshin, and V. V. Tarnetsky, “S-Band Buncher with Variable Parameters for Electron LINAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH306, pp. 1195-1197.
[n] J. M. Paterson, “Performance of the CEA Colliding Beam Facility”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 196-199.
[n] M. Dohlus, E. Gjonaj, T. Weiland, and I. Zagorodnov, “Coupler Kick for Very Short Bunches and its Compensation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP013, pp. 580-582.
[n] H. Fukuma, K. Endo, A. Kabe, Ta. Kubo, and T. Ozaki, “Power Supply Control for the TRISTAN Main Ring Accumulation Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1529-1532.
[n] T. Eggert, J. Enders, M. Espig, Y. Fritzsche, N. Kurichiyanil, and M. Wagner, “Setup for Cooled GaAs Cathodes With Increased Charge Lifetime”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4542-4544. doi:10.18429/JACoW-IPAC2018-THPMK100
[n] M. F. Vorogushin, V. A. Shishov, S. F. Naumov, A. V. Sidorov, O. M. Anouchin, and S. V. Kanaev, “MAIN TENDENCIES OF DEVELOPMENT OF RUSSIAN ONCOLOGY RADIOTHERAPY SYSTEM EFARAD”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper FRJO04, pp. XX-XX.
[n] M. M. Musardo et al., “3D Hall Probe Calibration System at Insertion Device Magnetic Measurement Facility at BNL”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC14, pp. 1169-1171.
[n] T. Tanaka, H. Kitamura, and T. Seike, “Measurement of SPring-8 XFEL Undualtor Prototype with the SAFALI System”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH053, pp. 371-373.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Baconnier, J. Gareyte, and P. Lefevre, “High Intensity Phenomena Observed in the CPS”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1027-1032.
- P. Peiffer et al., “New Materials and Designs for Superconductive Insertion Devices”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP086, pp. 2471-2473.
- C. N. Boyer, W. W. Destler, and H. Kim, “Controlled Collective Field Propagation for Ion Acceleration Using a Slow Wave Structure”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1625-1628.
- V. O. Tkachenko et al., “High Power Electron Accelerator Prototype”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP016, pp. 1502-1504.
- C. Giloux, A. Hilaire, A. Ijspeert, F. Rodriguez-Mateos, R. Schmidt, and F. Sonnemann, “Protection of the Superconducting Corrector Magnets for the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A08, pp. 2163-2165.
- M. Konrad et al., “Design and Commissioning of a Multi-frequency Digital Low Level RF Control System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC151, pp. 433-435.
- E. Chesta et al., “Overview of CERN Technology Transfer Strategy and Accelerator-related Activities”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA034, pp. 3702-3704.
- A. Araz, U. Bonnes, R. Eichhorn, F. Hug, M. Konrad, and A. Richter, “Development of an FPGA Based RF Control System For the S-DALINAC”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP026, pp. 718-720.
- A. Ijspeert and P. Sievers, “Recent Developments of Beam Dumps and Targets at the SPS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2841-2844.
- T. Niewodniczanski and E. Malwitz, “Mechanical Design Features of the UNILAC”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper E03, pp. 103-113.
- H.-D. Gr?ñf and A. Richter, “The Darmstadt Superconducting Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TU2-02, pp. 231-236.
- C. Eckardt, U. Bonnes, J. Enders, Y. Fritzsche, and M. Wagner, “Wire Scanners for Emittance Measurements at the 100 keV Spin Polarized Electron Beam Line at the S-DALINAC”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG023, pp. 186-188.
- A. Thomson et al., “Optimisation of Electrical and Instrumentation Design for the Diamond Light Source DDBA Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 448-450.
- A. Denker et al., “Eye Tumour Therapy in Berlin”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA002, pp. 64-66.
- V. V. Podlevskih, A. V. Antoshin, and V. V. Tarnetsky, “S-Band Buncher with Variable Parameters for Electron LINAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH306, pp. 1195-1197.
- J. M. Paterson, “Performance of the CEA Colliding Beam Facility”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 196-199.
- M. Dohlus, E. Gjonaj, T. Weiland, and I. Zagorodnov, “Coupler Kick for Very Short Bunches and its Compensation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP013, pp. 580-582.
- H. Fukuma, K. Endo, A. Kabe, Ta. Kubo, and T. Ozaki, “Power Supply Control for the TRISTAN Main Ring Accumulation Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1529-1532.
- T. Eggert, J. Enders, M. Espig, Y. Fritzsche, N. Kurichiyanil, and M. Wagner, “Setup for Cooled GaAs Cathodes With Increased Charge Lifetime”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4542-4544.
- M. F. Vorogushin, V. A. Shishov, S. F. Naumov, A. V. Sidorov, O. M. Anouchin, and S. V. Kanaev, “MAIN TENDENCIES OF DEVELOPMENT OF RUSSIAN ONCOLOGY RADIOTHERAPY SYSTEM EFARAD”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper FRJO04, pp. XX-XX.
- M. M. Musardo et al., “3D Hall Probe Calibration System at Insertion Device Magnetic Measurement Facility at BNL”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC14, pp. 1169-1171.
- T. Tanaka, H. Kitamura, and T. Seike, “Measurement of SPring-8 XFEL Undualtor Prototype with the SAFALI System”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH053, pp. 371-373.
Back to search