Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Konomi, M. Adachi, K. Hayashi, J. Yamazaki, and M. Katoh, “Status of UVSOR III”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA029, pp. 139-141.
[n] H. Hahn and S. Tepikian, “Perturbation Treatment of the Longitudinal Coupling Impedance of a Toroidal Beam Tube”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1707-1710.
[n] S. A. Avner et al., “First Steps Towards the New Spiral2 Project Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB07, pp. 175-177.
[n] P. Ausset, R. Gobin, P.-Y. Beauvais, and R. Duperrier, “Installation of the French High-Intensity Proton Injector at Saclay”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP048, pp. 153-155.
[n] M. Kuriki, Y. Seimiya, H. Hayano, K. Ohmi, S. Kashiwagi, and R. Kato, “High Gain FEL with a Micro-bunch Structured Beam by the Transverse-Longitudinal Phase Space Rotation”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP078, pp. 607-609.
[n] A. P. Blondel, “The MICE Experiment”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI046, pp. 1454-1456.
[n] E. M. Lechner, J. W. Angle, C. G. Baxley, M. J. Kelley, and C. E. Reece, “Topographic Evolution of Nitrogen Doped Nb Subjected to Electropolishing”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 207-210. doi:10.18429/JACoW-SRF2023-MOPMB044
[n] M. Sapinski et al., “LHC Magnet Quench Test with Beam Loss Generated by Wire Scan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC173, pp. 2391-2393.
[n] P. V. Tyagi, H. Hayano, S. Kato, T. Saeki, and M. Sawabe, “Study of HPR Created Oxide Layer at Nb Surfaces”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB069, pp. 336-338.
[n] K. Yanagida et al., “Signal Processor for Spring8 Linac BPM”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM02, pp. XX-XX.
[n] O. Kopitetzki, D. Schirmer, G. Schmidt, and K. Wille, “Beam Based Alignment of Quadrupole Triplets by Use of MATLAB Based Modeling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC117, pp. 1341-1343.
[n] A. M. Kolano, R. J. Barlow, A. Adelmann, and C. Baumgarten, “A Precise Beam Dynamics Model of the PSI Injector 2 to Estimate the Intensity Limit”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1630-1631. doi:10.18429/JACoW-IPAC2014-TUPRI031
[n] H. Singh, D. Marx, C. Montag, B. Podobedov, and H. Witte, “Design of normal conducting quadrupoles for the spin rotator section in the EIC electron storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB084, unpublished.
[n] D. Tlusty and M. G. Cherney, “Evolution of STAR Control System Complement Using Python Approach”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA152, pp. XX-XX.
[n] P. Balleyguier and F. Simoens, “Simulations vs. Measurements on the IPHI RFQ Cold Model”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO002, pp. 2127-2129.
[n] F. Rosatelli et al., “Design, Manufacturing and First Measurements of a Hybrid Permanent Magnet Undulator for Free Electron Laser”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2760-2763.
[n] M. R. Clausen, K. Furukawa, G. Liu, B. Schoeneburg, and A. Kazakov, “Redundant EPICS IOC in PC-based Unix-like Environment”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA31, pp. 158-160.
[n] C. Yao, N. P. Di Monte, and V. Sajaev, “Recent Progress of the Bunch-by-bunch Feedback System at the Advanced Photon Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB049, pp. 2803-2805.
[n] D. Chavez Valenzuela et al., “Field and Cost Optimization of a 5 T/m Normal Conducting Quadrupole for the 10-MeV Beam Line of the eLINAC of the Mexican Particle Accelerator Community”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4905-4908. doi:10.18429/JACoW-IPAC2018-THPML102
[n] Yu. P. Vakhrushin, Yu. N. Gavrish, Yu. A. Svistunov, M. F. Vorogushin and D. V. Efremov, “10 MeV Cyclotron and RF Linac as Installation for Neutron Therapy”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper J-11, pp. 527-529.
[n] Yu. N. Gavrish, V. L. Novikov, A. V. Sidorov, and A. M. Fialkovsky, “UPDATING OF THE DETECTOR SYSTEM TO INCREASE THE RESOLUTION CAPABILITY OF INDUSTRIAL INTROSCOPES AND TOMOGRAPHS BASED ON 6-15 MeV ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUJP13, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Konomi, M. Adachi, K. Hayashi, J. Yamazaki, and M. Katoh, “Status of UVSOR III”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA029, pp. 139-141.
- H. Hahn and S. Tepikian, “Perturbation Treatment of the Longitudinal Coupling Impedance of a Toroidal Beam Tube”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1707-1710.
- S. A. Avner et al., “First Steps Towards the New Spiral2 Project Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB07, pp. 175-177.
- P. Ausset, R. Gobin, P.-Y. Beauvais, and R. Duperrier, “Installation of the French High-Intensity Proton Injector at Saclay”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP048, pp. 153-155.
- M. Kuriki, Y. Seimiya, H. Hayano, K. Ohmi, S. Kashiwagi, and R. Kato, “High Gain FEL with a Micro-bunch Structured Beam by the Transverse-Longitudinal Phase Space Rotation”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP078, pp. 607-609.
- A. P. Blondel, “The MICE Experiment”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI046, pp. 1454-1456.
- E. M. Lechner, J. W. Angle, C. G. Baxley, M. J. Kelley, and C. E. Reece, “Topographic Evolution of Nitrogen Doped Nb Subjected to Electropolishing”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB044, pp. 207-210.
- M. Sapinski et al., “LHC Magnet Quench Test with Beam Loss Generated by Wire Scan”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC173, pp. 2391-2393.
- P. V. Tyagi, H. Hayano, S. Kato, T. Saeki, and M. Sawabe, “Study of HPR Created Oxide Layer at Nb Surfaces”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB069, pp. 336-338.
- K. Yanagida et al., “Signal Processor for Spring8 Linac BPM”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM02, pp. XX-XX.
- O. Kopitetzki, D. Schirmer, G. Schmidt, and K. Wille, “Beam Based Alignment of Quadrupole Triplets by Use of MATLAB Based Modeling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC117, pp. 1341-1343.
- A. M. Kolano, R. J. Barlow, A. Adelmann, and C. Baumgarten, “A Precise Beam Dynamics Model of the PSI Injector 2 to Estimate the Intensity Limit”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1630-1631.
- H. Singh, D. Marx, C. Montag, B. Podobedov, and H. Witte, “Design of normal conducting quadrupoles for the spin rotator section in the EIC electron storage ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB084, this conference.
- D. Tlusty and M. G. Cherney, “Evolution of STAR Control System Complement Using Python Approach”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA152, pp. XX-XX.
- P. Balleyguier and F. Simoens, “Simulations vs. Measurements on the IPHI RFQ Cold Model”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO002, pp. 2127-2129.
- F. Rosatelli et al., “Design, Manufacturing and First Measurements of a Hybrid Permanent Magnet Undulator for Free Electron Laser”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2760-2763.
- M. R. Clausen, K. Furukawa, G. Liu, B. Schoeneburg, and A. Kazakov, “Redundant EPICS IOC in PC-based Unix-like Environment”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA31, pp. 158-160.
- C. Yao, N. P. Di Monte, and V. Sajaev, “Recent Progress of the Bunch-by-bunch Feedback System at the Advanced Photon Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB049, pp. 2803-2805.
- D. Chavez Valenzuela et al., “Field and Cost Optimization of a 5 T/m Normal Conducting Quadrupole for the 10-MeV Beam Line of the eLINAC of the Mexican Particle Accelerator Community”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4905-4908.
- Yu. P. Vakhrushin, Yu. N. Gavrish, Yu. A. Svistunov, M. F. Vorogushin and D. V. Efremov, “10 MeV Cyclotron and RF Linac as Installation for Neutron Therapy”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper J-11, pp. 527-529.
- Yu. N. Gavrish, V. L. Novikov, A. V. Sidorov, and A. M. Fialkovsky, “UPDATING OF THE DETECTOR SYSTEM TO INCREASE THE RESOLUTION CAPABILITY OF INDUSTRIAL INTROSCOPES AND TOMOGRAPHS BASED ON 6-15 MeV ACCELERATORS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUJP13, pp. XX-XX.
Back to search