Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Caporaso, “A Novel Design for a High Power Superconducting Delay Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V019, pp. 1305-1307.
[n] C. Compton et al., “Prototyping of a Superconducting Elliptical Cavity for a Proton Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP076, pp. 758-760.
[n] C. Yu et al., “Two in-vacuum undulators developed for the Sirius”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1326-1328. doi:10.18429/JACoW-IPAC2025-TUPM072
[n] H. H. Lv, C. P. Chu, Y. B. Leng, and Y. B. Yan, “Development of Web-based Parameter Management System for SHINE”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1484. doi:10.18429/JACoW-ICALEPCS2019-WEPHA166
[n] J. B?Âdewadt, R. Ischebeck, B. Polzin, J. Ro?ƒbach, H. Schlarb, and A. Wagner, “A Compact Electron Photon Diagnostic Unit for a Seeded FEL”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB16, pp. 203-205.
[n] C. Compton et al., “High-Current Elliptical Cavity Design and Prototyping”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP073, pp. 752-754.
[n] Y. Takabayashi, Y. Iwasaki, T. Kaneyasu, and S. Koda, “Beam-Size Measurement System at the SAGA-LS Storage Ring”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP025, pp. 140-142.
[n] Y. C. Xu, H. Hao, D. H. He, and X. Q. Wang, “Study of MOSFET Solid-State Modulator for Fast Kicker”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP097, pp. 1775-1777.
[n] Y. Miyahara, “An Intense Gamma-ray Source with Compton Backscattering”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A04, pp. 761-763.
[n] H. Abasaki et al., “Power Spectrum Depended Spill Servo Control by DSP”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP540, pp. XX-XX.
[n] K. Takayama et al., “Induction Synchrotron (3): Rapid Cycle Synchrotron and Slow Cycle Synchrotron (Hardware Components for the Upgrade of KEK 12 GeV-PS)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH028, pp. 3287-3289.
[n] C. H. Wang, C. P. Chu, and H. H. Lv, “Global Information Management System for HEPS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 607. doi:10.18429/JACoW-ICALEPCS2019-MOPHA157
[n] P. Michel et al., “The Rossendorf IR-FEL ELBE”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUCAU02, pp. 488-491.
[n] J. Caporaso, C. Paul, and M. Fawley, “Transverse Beam Motion on the Second Axis of the Dual Axis Radiographic Hydrodynamic Test Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA54, pp. 1204-1206.
[n] S. J. Lenci et al., “RF Sources for 3rd & 4th Generation Light Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS63, pp. XX-XX.
[n] Y. Futami et al., “Secondary Beam Course for the Medical Use at HIMAC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP12C, pp. 2357-2359.
[n] J. L. Tom, T. Y. T. Kuo, and G. O. Hendry, “Results of Measurements of an Isocentric Fast Neutron Therapy Unit with a 42 MeV Proton Cyclotron System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GP-06, pp. 707-709.
[n] G. O. Hendry, “A Compact RF System for a 30-Inch AVF Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 257-260.
[n] P. Eyharts, P. Anthouard, J. Bardy, P. Eyl, and M. Thevenot, “LELIA: An Induction Linac Developed for FEL Application”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3204-3207.
[n] T. Semba et al., “Design and Manufacture of Superconducting Magnet for the Wiggler in SAGA-LS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB038, pp. 358-360.
[n] D. Churanov et al., “RELUS-5 ELECTRON LINAC START-UP”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH05, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Caporaso, “A Novel Design for a High Power Superconducting Delay Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V019, pp. 1305-1307.
- C. Compton et al., “Prototyping of a Superconducting Elliptical Cavity for a Proton Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP076, pp. 758-760.
- C. Yu et al., “Two in-vacuum undulators developed for the Sirius”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM072, pp. 1326-1328.
- H. H. Lv, C. P. Chu, Y. B. Leng, and Y. B. Yan, “Development of Web-based Parameter Management System for SHINE”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1484.
- J. B?Âdewadt, R. Ischebeck, B. Polzin, J. Ro?ƒbach, H. Schlarb, and A. Wagner, “A Compact Electron Photon Diagnostic Unit for a Seeded FEL”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB16, pp. 203-205.
- C. Compton et al., “High-Current Elliptical Cavity Design and Prototyping”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP073, pp. 752-754.
- Y. Takabayashi, Y. Iwasaki, T. Kaneyasu, and S. Koda, “Beam-Size Measurement System at the SAGA-LS Storage Ring”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP025, pp. 140-142.
- Y. C. Xu, H. Hao, D. H. He, and X. Q. Wang, “Study of MOSFET Solid-State Modulator for Fast Kicker”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP097, pp. 1775-1777.
- Y. Miyahara, “An Intense Gamma-ray Source with Compton Backscattering”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A04, pp. 761-763.
- H. Abasaki et al., “Power Spectrum Depended Spill Servo Control by DSP”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP540, pp. XX-XX.
- K. Takayama et al., “Induction Synchrotron (3): Rapid Cycle Synchrotron and Slow Cycle Synchrotron (Hardware Components for the Upgrade of KEK 12 GeV-PS)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH028, pp. 3287-3289.
- C. H. Wang, C. P. Chu, and H. H. Lv, “Global Information Management System for HEPS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 607.
- P. Michel et al., “The Rossendorf IR-FEL ELBE”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUCAU02, pp. 488-491.
- J. Caporaso, C. Paul, and M. Fawley, “Transverse Beam Motion on the Second Axis of the Dual Axis Radiographic Hydrodynamic Test Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA54, pp. 1204-1206.
- S. J. Lenci et al., “RF Sources for 3rd & 4th Generation Light Sources”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS63, pp. XX-XX.
- Y. Futami et al., “Secondary Beam Course for the Medical Use at HIMAC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP12C, pp. 2357-2359.
- J. L. Tom, T. Y. T. Kuo, and G. O. Hendry, “Results of Measurements of an Isocentric Fast Neutron Therapy Unit with a 42 MeV Proton Cyclotron System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GP-06, pp. 707-709.
- G. O. Hendry, “A Compact RF System for a 30-Inch AVF Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 257-260.
- P. Eyharts, P. Anthouard, J. Bardy, P. Eyl, and M. Thevenot, “LELIA: An Induction Linac Developed for FEL Application”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3204-3207.
- T. Semba et al., “Design and Manufacture of Superconducting Magnet for the Wiggler in SAGA-LS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB038, pp. 358-360.
- D. Churanov et al., “RELUS-5 ELECTRON LINAC START-UP”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH05, pp. XX-XX.
Back to search