Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. J. Lamm et al., “A New Facility to Test Superconducting Accelerator Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P003, pp. 3395-3397.
[n] Y. W. Kang et al., “Design and High Power Processing of RFQ Input Power Couplers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS074, pp. 2505-2507.
[n] N. Li et al., “SPEAR3 Gradient Dipole Core Fabrication”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB061, pp. 2174-2176.
[n] L. J. Allen, A. J. Lennox, and C. W. Schmidt, “Operational Experience with the Fermilab Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-16, pp. 82-84.
[n] W. W. Li, Z. G. He, Q. K. Jia, S. M. Jiang, L. Wang, and D. He, “Numerical Method for Longitudinal Dynamics of a Terahertz Cherenkov Free Electron Laser Driven by a Mev Picosecond Electron Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4614-4616. doi:10.18429/JACoW-IPAC2018-THPMK126
[n] M. Walter et al., “Alignment of Components at the University of Maryland Electron Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB075, pp. 2577-2579.
[n] R. R. Geraldes et al., “The Status of the New High-Dynamic DCM for Sirius”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 147-152. doi:10.18429/JACoW-MEDSI2018-WEOAMA01
[n] Cz. Golkowski, J. D. Ivers, J. A. Nation, P. Wang, and L. Schachter, “First Results from a High Power Ka Band TWT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA89, pp. 3603-3605.
[n] W. Xu et al., “RF and Mechanical Design of 647 MHz 5-Cell BNL4 Cavity for eRHIC ERL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2364-2366. doi:10.18429/JACoW-IPAC2016-WEPMR041
[n] A. V. Tollestrup, “Progress in Superconducting Magnet Technology for Accelerators/Storage Rings”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3198-3200.
[n] A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2811-2814. doi:10.18429/JACoW-IPAC2016-WEPOW001
[n] T. J. Shea et al., “SNS Accelerator Diagnostics: Progress and Challenges”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB001, pp. 512-516.
[n] J. P. Carneiro et al., “Beam Transport, Acceleration and Compression Studies in the Fermilab High-Brightness Photoinjector”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4049, pp. 878-880.
[n] D. Cheng et al., “Status of the PEP-II Low-Energy Ring Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P014, pp. 3619-3621.
[n] A. M. Porcellato et al., “Research and Development in the Field of SCRF at INFN-LNL”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP006, pp. 50-53.
[n] J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3908-3911. doi:10.18429/JACoW-IPAC2019-THPRB043
[n] G. Arduini et al., “The LHC Proton Beam in the CERN SPS: an Update”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB050, pp. 1718-1720.
[n] E. P. Chojnacki, R. D. Ehrlich, M. Liepe, J. Sears, and E. N. Smith, “DC Conductivity of RF Absorbing Materials”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO035, pp. 643-647.
[n] J. S. Berg and R. Palmer, “Cost Optimization of Non-Scaling FFAG Lattices for Muon Acceleration”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT158, pp. 902-904.
[n] S. Y. Zhang, “Thyristor Converter Simulation and Analysis”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1005-1008.
[n] D. Proch, “RF Superconductivity, A Status Review”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU1-03, pp. 216-220.
[n] M. Li, “Experience with Moving from DPA to Changes in Material Properties”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B05, pp. 468-471.
[n] W. Fischer et al., “eRHIC in Electron-Ion Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 738-741. doi:10.18429/JACoW-IPAC2019-MOPRB072
[n] M. A. Nozdrin et al., “Hollow Photocathode Prototype for e-Gun”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD84, pp. 242-244.
[n] X. Lu, S. W. Quan, and K. Zhao, “The Drive Laser System for DC-SC Injector”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS35, pp. XX-XX.
[n] W. Sliwinski, P. Charrue, V. Kain, and G. Kruk, “Management of Critical Machine Settings for Accelerators at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP099, pp. 594-596.
[n] J. Petter, J. Marriner, and J. McCarthy, “Transverse Beam Dampers for the FNAL Antiproton Rings”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 791-794.
[n] Y. H. Wu, D. Kayran, V. Litvinenko, and I. Pinayev, “Beam Dynamics Studies for Coherent Electron Cooling Experiment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3032-3035. doi:10.18429/JACoW-IPAC2016-WEPOY023
[n] C. Chen, K. Zhao, B. Zhang, L. Wang, and J. Song, “RD Efforts on Nb Superconducting RF Cavity at IHIP of Peking University”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89H01, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. J. Lamm et al., “A New Facility to Test Superconducting Accelerator Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P003, pp. 3395-3397.
- Y. W. Kang et al., “Design and High Power Processing of RFQ Input Power Couplers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS074, pp. 2505-2507.
- N. Li et al., “SPEAR3 Gradient Dipole Core Fabrication”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB061, pp. 2174-2176.
- L. J. Allen, A. J. Lennox, and C. W. Schmidt, “Operational Experience with the Fermilab Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-16, pp. 82-84.
- W. W. Li, Z. G. He, Q. K. Jia, S. M. Jiang, L. Wang, and D. He, “Numerical Method for Longitudinal Dynamics of a Terahertz Cherenkov Free Electron Laser Driven by a Mev Picosecond Electron Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4614-4616.
- M. Walter et al., “Alignment of Components at the University of Maryland Electron Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB075, pp. 2577-2579.
- R. R. Geraldes et al., “The Status of the New High-Dynamic DCM for Sirius”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 147-152.
- Cz. Golkowski, J. D. Ivers, J. A. Nation, P. Wang, and L. Schachter, “First Results from a High Power Ka Band TWT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA89, pp. 3603-3605.
- W. Xu et al., “RF and Mechanical Design of 647 MHz 5-Cell BNL4 Cavity for eRHIC ERL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2364-2366.
- A. V. Tollestrup, “Progress in Superconducting Magnet Technology for Accelerators/Storage Rings”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3198-3200.
- A. R. D. Rodrigues et al., “Sirius Status Report”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2811-2814.
- T. J. Shea et al., “SNS Accelerator Diagnostics: Progress and Challenges”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB001, pp. 512-516.
- J. P. Carneiro et al., “Beam Transport, Acceleration and Compression Studies in the Fermilab High-Brightness Photoinjector”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4049, pp. 878-880.
- D. Cheng et al., “Status of the PEP-II Low-Energy Ring Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P014, pp. 3619-3621.
- A. M. Porcellato et al., “Research and Development in the Field of SCRF at INFN-LNL”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOP006, pp. 50-53.
- J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3908-3911.
- G. Arduini et al., “The LHC Proton Beam in the CERN SPS: an Update”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB050, pp. 1718-1720.
- E. P. Chojnacki, R. D. Ehrlich, M. Liepe, J. Sears, and E. N. Smith, “DC Conductivity of RF Absorbing Materials”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO035, pp. 643-647.
- J. S. Berg and R. Palmer, “Cost Optimization of Non-Scaling FFAG Lattices for Muon Acceleration”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT158, pp. 902-904.
- S. Y. Zhang, “Thyristor Converter Simulation and Analysis”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1005-1008.
- D. Proch, “RF Superconductivity, A Status Review”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TU1-03, pp. 216-220.
- M. Li, “Experience with Moving from DPA to Changes in Material Properties”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B05, pp. 468-471.
- W. Fischer et al., “eRHIC in Electron-Ion Operation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 738-741.
- M. A. Nozdrin et al., “Hollow Photocathode Prototype for e-Gun”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD84, pp. 242-244.
- X. Lu, S. W. Quan, and K. Zhao, “The Drive Laser System for DC-SC Injector”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS35, pp. XX-XX.
- W. Sliwinski, P. Charrue, V. Kain, and G. Kruk, “Management of Critical Machine Settings for Accelerators at CERN”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP099, pp. 594-596.
- J. Petter, J. Marriner, and J. McCarthy, “Transverse Beam Dampers for the FNAL Antiproton Rings”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 791-794.
- Y. H. Wu, D. Kayran, V. Litvinenko, and I. Pinayev, “Beam Dynamics Studies for Coherent Electron Cooling Experiment”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3032-3035.
- C. Chen, K. Zhao, B. Zhang, L. Wang, and J. Song, “RD Efforts on Nb Superconducting RF Cavity at IHIP of Peking University”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89H01, pp. XX-XX.
Back to search