Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Assadi, “Overview of Beam Instrumentations for High-Power Operation of the Spallation Neutron Source”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF01, pp. 439-439.
[n] M. P. Kelly, K. W. Shepard, M. Kedzie, J. D. Fuerst, and S. Sharamentov, “Microphonics Measurements in RIA Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP29, pp. 690-692.
[n] P. Hurh, “The Radiation Damage In Accelerator Target Environments (RaDIATE) Collaboration R&D Program - Status and Future Activities”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 117-120. doi:10.18429/JACoW-NAPAC2016-MOPOB23
[n] R. C. McCrady et al., “Active Damping of the e-p Instability at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS050, pp. 548-550.
[n] Y.-C. Chien et al., “Status of AC Power Supplies for TPS Booster Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3203-3205. doi:10.18429/JACoW-IPAC2015-WEPHA040
[n] S. M. Cousineau, S. Assadi, J. A. Holmes, and M. A. Plum, “Experimental Characterization of the Spallation Neutron Source Accumulator Ring Collimation System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOBKI01, pp. 703-705.
[n] J. F. Bartlett, S. Krzywdzinski, G. Savage, V. I. Sirotenko, and D. Zhang, “The Control Architecture of the D0 Experiment”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUCT005, pp. XX-XX.
[n] P. Hurh and A. Leveling, “Autopsy Results of Failed Lithium Collection Lenses at the FNAL Antiproton Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG009, pp. 1440-1442.
[n] B. S. Wang, Y.-C. Chien, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “The Acceptance Measurement Platform for TPS Corrector Magnet Power Supplies”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 514-516. doi:10.18429/JACoW-IPAC2014-MOPME062
[n] C. L. Chen, H.-P. Chang, C.-S. Fann, and K. L. Tsai, “A Monitoring System for TPS Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4272-4274. doi:10.18429/JACoW-IPAC2019-THPTS069
[n] Y.-C. Liu, H.-P. Chang, K.-K. Lin, Y. K. Lin, and G.-H. Luo, “Commissioning of 360 mA Top-up Operation at TLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC043, pp. 2082-2084.
[n] G. White and H. Shoaee, “The NLC Software Requirements Methodology”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP042, pp. XX-XX.
[n] P. Hurh, O. Caretta, T. R. Davenne, C. J. Densham, P. Loveridge, and N. Simos, “High-Power Targets: Experience and R&D for 2 MW”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS2, pp. 1496-1500.
[n] A. P. Zhukov and S. Assadi, “SNS BLM System Overview: Detectors, Measurements, Simulations”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF04, pp. 453-453.
[n] B.-S. Wang, K.-B. Liu, and Y. S. Wong, “Development of high-current correction magnet power supply for TPS facilities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3745-3747. doi:10.18429/JACoW-IPAC2024-THPS10
[n] K. Mittag, H. D. Schwarz, and H. A. Schwettman, “Beam Breakup in a 55-Cell Superconductring Accelerator Structure”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 86-91.
[n] Y. S. Wong, Y.-C. Chien, C. Y. Liu, K.-B. Liu, and B. S. Wang, “DESIGN STORAGE RING AND BOOSTER RING POWER SUPPLY CABLING IN TAIWAN PHOTON SOURCE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3194-3196. doi:10.18429/JACoW-IPAC2015-WEPHA037
[n] G. Bisoffi et al., “Results on INFN-LNL Niobium RFQ Resonators”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WEO07, pp. 535-538.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Assadi, “Overview of Beam Instrumentations for High-Power Operation of the Spallation Neutron Source”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF01, pp. 439-439.
- M. P. Kelly, K. W. Shepard, M. Kedzie, J. D. Fuerst, and S. Sharamentov, “Microphonics Measurements in RIA Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP29, pp. 690-692.
- P. Hurh, “The Radiation Damage In Accelerator Target Environments (RaDIATE) Collaboration R&D Program - Status and Future Activities”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 117-120.
- R. C. McCrady et al., “Active Damping of the e-p Instability at the LANL PSR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS050, pp. 548-550.
- Y.-C. Chien et al., “Status of AC Power Supplies for TPS Booster Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3203-3205.
- S. M. Cousineau, S. Assadi, J. A. Holmes, and M. A. Plum, “Experimental Characterization of the Spallation Neutron Source Accumulator Ring Collimation System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOBKI01, pp. 703-705.
- J. F. Bartlett, S. Krzywdzinski, G. Savage, V. I. Sirotenko, and D. Zhang, “The Control Architecture of the D0 Experiment”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUCT005, pp. XX-XX.
- P. Hurh and A. Leveling, “Autopsy Results of Failed Lithium Collection Lenses at the FNAL Antiproton Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG009, pp. 1440-1442.
- B. S. Wang, Y.-C. Chien, C.-Y. Liu, K.-B. Liu, and Y. S. Wong, “The Acceptance Measurement Platform for TPS Corrector Magnet Power Supplies”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 514-516.
- C. L. Chen, H.-P. Chang, C.-S. Fann, and K. L. Tsai, “A Monitoring System for TPS Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4272-4274.
- Y.-C. Liu, H.-P. Chang, K.-K. Lin, Y. K. Lin, and G.-H. Luo, “Commissioning of 360 mA Top-up Operation at TLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC043, pp. 2082-2084.
- G. White and H. Shoaee, “The NLC Software Requirements Methodology”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP042, pp. XX-XX.
- P. Hurh, O. Caretta, T. R. Davenne, C. J. Densham, P. Loveridge, and N. Simos, “High-Power Targets: Experience and R&D for 2 MW”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEODS2, pp. 1496-1500.
- A. P. Zhukov and S. Assadi, “SNS BLM System Overview: Detectors, Measurements, Simulations”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF04, pp. 453-453.
- B.-S. Wang, K.-B. Liu, and Y. S. Wong, “Development of high-current correction magnet power supply for TPS facilities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS10, pp. 3745-3747.
- K. Mittag, H. D. Schwarz, and H. A. Schwettman, “Beam Breakup in a 55-Cell Superconductring Accelerator Structure”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 86-91.
- Y. S. Wong, Y.-C. Chien, C. Y. Liu, K.-B. Liu, and B. S. Wang, “DESIGN STORAGE RING AND BOOSTER RING POWER SUPPLY CABLING IN TAIWAN PHOTON SOURCE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3194-3196.
- G. Bisoffi et al., “Results on INFN-LNL Niobium RFQ Resonators”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper WEO07, pp. 535-538.
Back to search