Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. S. Sekutowicz et al., “Nb-Pb Superconducting RF-Gun”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS092, pp. 3493-3495.
[n] P. Scharrer et al., “An Upgrade for the 1.4 MeV/u Gas Stripper at the GSI UNILAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1394-1396. doi:10.18429/JACoW-IPAC2016-TUPMR058
[n] J. I. Iversen, A. Brinkmann, A. Ermakov, A. Muhs, and J. Ziegler, “Insight into DESYÔÇÖs Test Laboratory for Niobium Raw Material and Semi-finished Products”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1157-1161. doi:10.18429/JACoW-SRF2019-THP100
[n] P. Scharrer et al., “Stripping of High Intensity Heavy-Ion Beams in a Pulsed Gas Stripper Device at 1.4 MeV/u”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3773-3775. doi:10.18429/JACoW-IPAC2015-THPF035
[n] Y. Zhang and C. P. Chu, “Beam Tuning of Achromatic Bending Areas of the FRIB Superconducting Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 74-76. doi:10.18429/JACoW-LINAC2016-MOPRC005
[n] P. Michel, T. E. Cowan, U. Lehnert, and U. Schramm, “Status of the Radiation Source ELBE Upgrade”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2233-2234. doi:10.18429/JACoW-IPAC2014-WEPRO113
[n] I. M. Kapchinskiy, “History of RFQ Development”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0001, pp. 43-48.
[n] A. He et al., “Simulation Design of a Low Energy Bunch Compressor with Space Charge Effect”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA091, pp. 2307-2309.
[n] L. Rybarcyk and R. C. McCrady, “The Effect of DTL Cavity Field Errors on Beam Spill at LANSCE”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 301-303. doi:10.18429/JACoW-LINAC2016-MOPLR072
[n] G. V. Dolbilov et al., “Study of 14 GHz VLEPP Klystron With RF Absorbing Drift Tubes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ34, pp. 1605-1607.
[n] Z. A. Conway et al., “Progress Towards a 2.0 K Half-Wave Resonator Cryomodule for Fermilab's PIP-II Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 906-909. doi:10.18429/JACoW-LINAC2016-THPLR027
[n] G. Zschornack, F. Grossmann, V. P. Ovsyannikov, and E. Griesmayer, “Dresden Ebis-Sc ÔÇô A New Generation Of Powerful Ion Sources For The Medical Particle Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 298-299.
[n] E. Ritter et al., “Implementation of a Superconducting Electron Beam Ion Source into the HIT Ion Source Test Bench”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2153-2155. doi:10.18429/JACoW-IPAC2014-WEPRO083
[n] M. Zaera-Sanz, S. L. Birch, A. Monera Martinez, and A. Nordt, “Design, Development and Implementation of a Highly Dependable Magnet Powering Interlock System for ESS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1045-1047. doi:10.18429/JACoW-IPAC2015-MOPTY050
[n] R. Miyamoto, “Tracking Based Courant-Snyder Parameter Matching in a Linac with a Strong Space-Charge Force”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 93-96. doi:10.18429/JACoW-LINAC2016-MOPRC013
[n] Y. Zhang, “Beam Tuning and Error Analysis of a Superconducting Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 77-79. doi:10.18429/JACoW-LINAC2016-MOPRC006
[n] G. V. Dolbilov et al., “Design of 135 MW X-Band Relativistic Klystron for Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P023, pp. 3126-3128.
[n] M. El Khaldi, J. Bonis, A. Camara, L. Garolfi, and A. Gonnin, “Electromagnetic, Thermal, and Structural Analysis of a THOMX RF Gun Using ANSYS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3925-3927. doi:10.18429/JACoW-IPAC2016-THPOW002
[n] A. D. Palczewski, G. V. Eremeev, R. L. Geng, and C. E. Reece, “Quench Studies of Six High Temperature Nitrogen Doped 9 Cell Cavities for Use in the LCLS-II Baseline Prototype Cryo-module at Jefferson Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3528-3531. doi:10.18429/JACoW-IPAC2015-WEPWI019
[n] M. Kreller et al., “An ECRIS Facility for Investigating Nuclear Reactions in Astrophysical Plasmas”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 59-63. doi:10.18429/JACoW-ECRIS2016-WEBO01
[n] A. D. Palczewski, R. L. Geng, and H. Tian, “Optimizing Centrifugal Barrel Polishing for Mirror Finish SRFCavity and Rf Tests at Jefferson Lab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC094, pp. 2435-2437.
[n] R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA003, pp. 10-14.
[n] V. V. Katalev and S. Choroba, “Waveguide Distribution Systems for the European XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH116, pp. 1286-1288.
[n] S. M. Gurov et al., “Status of NSLS-II Booster”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA053, pp. 196-198.
[n] X. P. Ding, H. G. Kirk, and K. T. McDonald, “Carbon Target Optimization for a Muon Collier/neutrino Factory With a 6.75 GeV Proton Driver”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3982-3984. doi:10.18429/JACoW-IPAC2014-THPRI089
[n] F. Ullmann, F. Grossmann, V. P. Ovsyannikov, A. Schwan, and G. Zschornack, “Electron Beam Ion Sources – A New Access for Particle Acceleration”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS078, pp. 1719-1721.
[n] A. van Steenbergen and C. Gallardo, “Inverse Free Electron Laser Accelerator Development”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC002, pp. XX-XX.
[n] H. Reymond, O. O. Andreassen, C. Charrondi?¿re, G. Lehmann Miotto, A. Rijllart, and D. Scannicchio, “Lhc Dipole Magnet Splice Resistance From Sm18 Data Mining”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN007, pp. 98-101.
[n] S. L. Samoylov, A. M. Barnyakov, and A. E. Levichev, “Development of High Power S-Band Klystron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 382-384. doi:10.18429/JACoW-RUPAC2018-WEPSB51
[n] W. A. Barth et al., “U28+ Intensity Record Applying a H2-Gas Stripper Cell”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3693-3695. doi:10.18429/JACoW-IPAC2015-THPF008
[n] A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414.
[n] H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347.
[n] F. Ullmann, A. Schwan, U. Hagen, O. Heid, H. von Jagwitz, and G. Zschornack, “Shaping of Ion Pulses from an Electron Beam Ion Source for Particle Injection into Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS077, pp. 1716-1718.
[n] Z. A. Conway et al., “Superconducting Cavity Cryomodules for Heavy-Ion Accelerators”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEM1I01, pp. 163-165.
[n] A. P. Kozlov, “Magnetic Kicker for the Beam Extraction From the Nuclotron of the NICA Accelerator Complex”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC27, unpublished.
[n] K. T. McDonald, V. B. Graves, H. G. Kirk, N. Souchlas, and R. J. Weggel, “Energy Deposition in the Target System of a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3979-3981. doi:10.18429/JACoW-IPAC2014-THPRI088
[n] X. P. Ding, H. G. Kirk, K. T. McDonald, C. T. Rogers, P. Snopok, and N. Souchlas, “Energy Deposition in Magnets and Shielding of the Target System of a Staged Neutrino Factory”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA10, pp. 1376-1378.
[n] C. Steier et al., “Commissioning Results of the Fast Orbit Feedback at the ALS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB037, pp. 3374-3376.
[n] A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_005.
[n] L.-H. Yu and F. J. Willeke, “Ultra-Short X-ray Pulse Generation by Electron Beam Slicing in Storage Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOAB201, pp. 1134-1136.
[n] J. M. Jimenez et al., “Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 228-231. doi:10.18429/JACoW-IPAC2018-MOPMF053
[n] H. J. Qian et al., “Analysis and Optimization of Coupler Kick in APEX”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA09, pp. 607-609.
For LaTeX
Use Complete Form
For BibTeX
References
- J. S. Sekutowicz et al., “Nb-Pb Superconducting RF-Gun”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS092, pp. 3493-3495.
- P. Scharrer et al., “An Upgrade for the 1.4 MeV/u Gas Stripper at the GSI UNILAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1394-1396.
- J. I. Iversen, A. Brinkmann, A. Ermakov, A. Muhs, and J. Ziegler, “Insight into DESYÔÇÖs Test Laboratory for Niobium Raw Material and Semi-finished Products”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1157-1161.
- P. Scharrer et al., “Stripping of High Intensity Heavy-Ion Beams in a Pulsed Gas Stripper Device at 1.4 MeV/u”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3773-3775.
- Y. Zhang and C. P. Chu, “Beam Tuning of Achromatic Bending Areas of the FRIB Superconducting Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 74-76.
- P. Michel, T. E. Cowan, U. Lehnert, and U. Schramm, “Status of the Radiation Source ELBE Upgrade”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2233-2234.
- I. M. Kapchinskiy, “History of RFQ Development”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0001, pp. 43-48.
- A. He et al., “Simulation Design of a Low Energy Bunch Compressor with Space Charge Effect”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA091, pp. 2307-2309.
- L. Rybarcyk and R. C. McCrady, “The Effect of DTL Cavity Field Errors on Beam Spill at LANSCE”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 301-303.
- G. V. Dolbilov et al., “Study of 14 GHz VLEPP Klystron With RF Absorbing Drift Tubes”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ34, pp. 1605-1607.
- Z. A. Conway et al., “Progress Towards a 2.0 K Half-Wave Resonator Cryomodule for Fermilab's PIP-II Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 906-909.
- G. Zschornack, F. Grossmann, V. P. Ovsyannikov, and E. Griesmayer, “Dresden Ebis-Sc ÔÇô A New Generation Of Powerful Ion Sources For The Medical Particle Therapy”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 298-299.
- E. Ritter et al., “Implementation of a Superconducting Electron Beam Ion Source into the HIT Ion Source Test Bench”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2153-2155.
- M. Zaera-Sanz, S. L. Birch, A. Monera Martinez, and A. Nordt, “Design, Development and Implementation of a Highly Dependable Magnet Powering Interlock System for ESS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1045-1047.
- R. Miyamoto, “Tracking Based Courant-Snyder Parameter Matching in a Linac with a Strong Space-Charge Force”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 93-96.
- Y. Zhang, “Beam Tuning and Error Analysis of a Superconducting Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 77-79.
- G. V. Dolbilov et al., “Design of 135 MW X-Band Relativistic Klystron for Linear Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P023, pp. 3126-3128.
- M. El Khaldi, J. Bonis, A. Camara, L. Garolfi, and A. Gonnin, “Electromagnetic, Thermal, and Structural Analysis of a THOMX RF Gun Using ANSYS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3925-3927.
- A. D. Palczewski, G. V. Eremeev, R. L. Geng, and C. E. Reece, “Quench Studies of Six High Temperature Nitrogen Doped 9 Cell Cavities for Use in the LCLS-II Baseline Prototype Cryo-module at Jefferson Laboratory”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3528-3531.
- M. Kreller et al., “An ECRIS Facility for Investigating Nuclear Reactions in Astrophysical Plasmas”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 59-63.
- A. D. Palczewski, R. L. Geng, and H. Tian, “Optimizing Centrifugal Barrel Polishing for Mirror Finish SRFCavity and Rf Tests at Jefferson Lab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC094, pp. 2435-2437.
- R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOA003, pp. 10-14.
- V. V. Katalev and S. Choroba, “Waveguide Distribution Systems for the European XFEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH116, pp. 1286-1288.
- S. M. Gurov et al., “Status of NSLS-II Booster”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA053, pp. 196-198.
- X. P. Ding, H. G. Kirk, and K. T. McDonald, “Carbon Target Optimization for a Muon Collier/neutrino Factory With a 6.75 GeV Proton Driver”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3982-3984.
- F. Ullmann, F. Grossmann, V. P. Ovsyannikov, A. Schwan, and G. Zschornack, “Electron Beam Ion Sources – A New Access for Particle Acceleration”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS078, pp. 1719-1721.
- A. van Steenbergen and C. Gallardo, “Inverse Free Electron Laser Accelerator Development”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3PC002, pp. XX-XX.
- H. Reymond, O. O. Andreassen, C. Charrondi?¿re, G. Lehmann Miotto, A. Rijllart, and D. Scannicchio, “Lhc Dipole Magnet Splice Resistance From Sm18 Data Mining”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN007, pp. 98-101.
- S. L. Samoylov, A. M. Barnyakov, and A. E. Levichev, “Development of High Power S-Band Klystron”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 382-384.
- W. A. Barth et al., “U28+ Intensity Record Applying a H2-Gas Stripper Cell”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3693-3695.
- A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414.
- H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347.
- F. Ullmann, A. Schwan, U. Hagen, O. Heid, H. von Jagwitz, and G. Zschornack, “Shaping of Ion Pulses from an Electron Beam Ion Source for Particle Injection into Accelerators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS077, pp. 1716-1718.
- Z. A. Conway et al., “Superconducting Cavity Cryomodules for Heavy-Ion Accelerators”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEM1I01, pp. 163-165.
- A. P. Kozlov, “Magnetic Kicker for the Beam Extraction From the Nuclotron of the NICA Accelerator Complex”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC27, unpublished.
- K. T. McDonald, V. B. Graves, H. G. Kirk, N. Souchlas, and R. J. Weggel, “Energy Deposition in the Target System of a Muon Collider/Neutrino Factory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3979-3981.
- X. P. Ding, H. G. Kirk, K. T. McDonald, C. T. Rogers, P. Snopok, and N. Souchlas, “Energy Deposition in Magnets and Shielding of the Target System of a Staged Neutrino Factory”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA10, pp. 1376-1378.
- C. Steier et al., “Commissioning Results of the Fast Orbit Feedback at the ALS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB037, pp. 3374-3376.
- A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_005.
- L.-H. Yu and F. J. Willeke, “Ultra-Short X-ray Pulse Generation by Electron Beam Slicing in Storage Rings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOAB201, pp. 1134-1136.
- J. M. Jimenez et al., “Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 228-231.
- H. J. Qian et al., “Analysis and Optimization of Coupler Kick in APEX”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA09, pp. 607-609.
Back to search