Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Algin, B. Akkus, L. Sahin, and H. Cetinkaya, “TAC Proton Accelerator Facility: Normal Conducting Part”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3335-3337. doi:10.18429/JACoW-IPAC2014-THPME049
[n] H.-J. Kwon et al., “Operation of the PEFP 20MeV Proton Linac at KAERI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD050, pp. 798-800.
[n] D. R. Makowski, G. W. Jablonski, T. Kozak, A. Mielczarek, and A. Napieralski, “Universal FMC-Compliant Module for xTCA Systems”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP292, pp. 663-665.
[n] B. F. White, S. T. Craig, V. A. Mason, S. M. Morsink, and D. L. Smyth, “Controlled Magnet Excitation for Electron Beam Scanning in Industrial Irradiators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1855-1858.
[n] L. Falbo, E. Bressi, and C. Priano, “Empty Sweeping Bucket for Slow Extraction”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 676-678. doi:10.18429/JACoW-IPAC2018-TUPAF010
[n] C. H. Huang, Y.-T. Chang, Y.-S. Cheng, K. T. Hsu, and C. H. Kuo, “Network Architecture at Taiwan Photon Source of NSRRC”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO034, pp. 117-119.
[n] E. A. Wadlinger, “General Least-Squares Fitting Procedures to Minimize the Volume of a Hyperellipsoid”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S4-7, pp. 242-244.
[n] M. K. Grecki, G. W. Jablonski, W. Jalmuzna, and D. R. Makowski, “Automatic Generation of SEU Immunity for FPGA Based Electronics for Accelerators”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP003, pp. 1529-1531.
[n] J. Ungrin, J. C. Brown, B. G. Chidley, R. M. Hutcheon, G. E. McMichael, and S. O. Schriber, “Low Energy 100% Duty Factor Alvarez Linacs at Chalk River”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper A102, pp. 12-14.
[n] J. Vennekate et al., “Conduction-cooled operation of an SRF multi-cell cavity”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 203-209. doi:10.18429/JACoW-SRF2025-MOP59
[n] P. Ch. Chochula, A. Augustinus, A. N. Kurepin, M. Lechman, O. Pinazza, and P. Rosinsky, “Operational Experience with the ALICE Detector Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB07, pp. 1485-1488.
[n] S. G. Yaramyshev et al., “A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3220-3222. doi:10.18429/JACoW-IPAC2014-THPME007
[n] I. Marneris, E. M. Bajon, R. Bonati, T. Roser, J. Sandberg, and N. Tsoupas, “High Power Fast Ramping Power Supplies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4GRI01, pp. 112-116.
[n] A. N. Anatsky et al., “Design of 30-MeV High-Current Linear Induction Electron Accelerator-Injector for NSP-2 Pulsed Reactor”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 625-628.
[n] G. W. Foster, P. O. Mazur, T. Peterson, C. D. Sylvester, and P. Schlabach, “Design and Operation of an Experimental ``Double-C'' Transmission Line Magnet”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P002, pp. 3392-3394.
[n] E. Daly et al., “JLab Cryomodule Assembly Infrastructure Modifications for LCLS-II”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB113, pp. 898-901.
[n] H. J. Cha, J. W. Choi, I. Chun, and M. Lee, “Magnetic Field Measurements in a Cryomodule with Nearby Warm-Section Quadrupole Magnets of RAON Heavy Ion Accelerator”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 625-627. doi:10.18429/JACoW-LINAC2016-TUP106001
[n] T. Shimano et al., “Design Study of a Superconducting SOR Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 434-437.
[n] R. M. Hutcheon, F. P. Adams, P. Lucuta, J. E. McGregor, B. H. Smith, and M. S. de Jong, “Measurements of High-Temperature rf and Microwave Properties of Selected Aluminas and Ferrites Used in Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 795-798.
[n] N. Yu. Kazarinov, V. Aleksandrov, Y. Jongen, V. Shevtsov, and A. Tuzikov, “Axial Injection Beam Line of C400 Superconducting Cyclotron for Carbon Therapy”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP102, pp. 5020-5022.
[n] I. Boscolo et al., “Application of Ferroelectric Cathodes to Enhance the Ion Yield in the CAESAR Source at LNS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B03, pp. 1631-1633.
[n] J.-P. Thiry and W. Hillert, “Lattice Matching with Elegant at ELSA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2690-2692. doi:10.18429/JACoW-IPAC2016-WEPOR011
[n] M. L. Seely, E. C. Bonnema, D. J. Carvelli, E. K. Cunningham, E. C. Kasper, and G. D. Korecky, “Fabrication of the Jefferson Laboratory Cryogenic Control Reservoirs”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP175, pp. 1157-1159.
[n] H. Kim, J. W. Choi, Y. W. Jo, W. K. Kim, Y. Kim, and M. Lee, “Operation Techniques for HWR1 Cryomodule”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2205-2207. doi:10.18429/JACoW-IPAC2016-WEPMB039
[n] T. Lef?¿vre et al., “First Beam Measurements with the LHC Synchrotron Light Monitors”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE057, pp. 1104-1106.
[n] O. Pinazza, A. Augustinus, P. M. Bond, P. Ch. Chochula, M. Lechman, and A. N. Kurepin, “Monitoring of the New ALICE Data Center Infrastructure: Going Wireless”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA122, pp. XX-XX.
[n] V. Malka, “Review of Laser Wakefield Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOYBB101, pp. 11-15.
[n] D. Egger, A. E. Dabrowski, S. D?Âbert, T. Lef?¿vre, and O. Mete, “Design and Results of a Time Resolved Spectrometer for the 5 MeV Photoinjector for CTF3 PHIN”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE056, pp. 1101-1103.
[n] T. R. Furness et al., “Adaptive Collimator Design for Future Particle Accelerators”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 240-244. doi:10.18429/JACoW-IBIC2018-TUPA15
[n] S. A. Martin et al., “Lifetime Studies for Polarized and Unpolarized Protons in COSY”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP097, pp. 5008-5010.
[n] J. F. Schmidt and W. Hillert, “Magnetic Field Parametrization for Efficient Spin Tracking with POLE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 808-810. doi:10.18429/JACoW-IPAC2015-MOPHA014
[n] S. Karabekyan, J. Pflueger, L. Lin, Y. T. Liu, and W. Wang, “Use of Automation in Commissioning Process of the Undulators of the European X-Ray Free Electron Laser”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 64-67. doi:10.18429/JACoW-ICALEPCS2015-MOD3O05
[n] M. Fiorini et al., “Experimental Study of Crystal Channeling at CERN-SPS for Beam-halo Cleaning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS022, pp. 1538-1540.
[n] J. Branlard and B. Chase, “Modeling the LLRF Control of a Multi-Cavity RF Station for Project-X”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3RAC05, pp. 1883-1885.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Algin, B. Akkus, L. Sahin, and H. Cetinkaya, “TAC Proton Accelerator Facility: Normal Conducting Part”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3335-3337.
- H.-J. Kwon et al., “Operation of the PEFP 20MeV Proton Linac at KAERI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD050, pp. 798-800.
- D. R. Makowski, G. W. Jablonski, T. Kozak, A. Mielczarek, and A. Napieralski, “Universal FMC-Compliant Module for xTCA Systems”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP292, pp. 663-665.
- B. F. White, S. T. Craig, V. A. Mason, S. M. Morsink, and D. L. Smyth, “Controlled Magnet Excitation for Electron Beam Scanning in Industrial Irradiators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1855-1858.
- L. Falbo, E. Bressi, and C. Priano, “Empty Sweeping Bucket for Slow Extraction”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 676-678.
- C. H. Huang, Y.-T. Chang, Y.-S. Cheng, K. T. Hsu, and C. H. Kuo, “Network Architecture at Taiwan Photon Source of NSRRC”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO034, pp. 117-119.
- E. A. Wadlinger, “General Least-Squares Fitting Procedures to Minimize the Volume of a Hyperellipsoid”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S4-7, pp. 242-244.
- M. K. Grecki, G. W. Jablonski, W. Jalmuzna, and D. R. Makowski, “Automatic Generation of SEU Immunity for FPGA Based Electronics for Accelerators”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP003, pp. 1529-1531.
- J. Ungrin, J. C. Brown, B. G. Chidley, R. M. Hutcheon, G. E. McMichael, and S. O. Schriber, “Low Energy 100% Duty Factor Alvarez Linacs at Chalk River”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper A102, pp. 12-14.
- J. Vennekate et al., “Conduction-cooled operation of an SRF multi-cell cavity”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 203-209.
- P. Ch. Chochula, A. Augustinus, A. N. Kurepin, M. Lechman, O. Pinazza, and P. Rosinsky, “Operational Experience with the ALICE Detector Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper FRCOAAB07, pp. 1485-1488.
- S. G. Yaramyshev et al., “A Virtual Charge State Separator as an Advanced Tool Coupling Measurements and Simulations”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3220-3222.
- I. Marneris, E. M. Bajon, R. Bonati, T. Roser, J. Sandberg, and N. Tsoupas, “High Power Fast Ramping Power Supplies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO4GRI01, pp. 112-116.
- A. N. Anatsky et al., “Design of 30-MeV High-Current Linear Induction Electron Accelerator-Injector for NSP-2 Pulsed Reactor”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 625-628.
- G. W. Foster, P. O. Mazur, T. Peterson, C. D. Sylvester, and P. Schlabach, “Design and Operation of an Experimental ``Double-C'' Transmission Line Magnet”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P002, pp. 3392-3394.
- E. Daly et al., “JLab Cryomodule Assembly Infrastructure Modifications for LCLS-II”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB113, pp. 898-901.
- H. J. Cha, J. W. Choi, I. Chun, and M. Lee, “Magnetic Field Measurements in a Cryomodule with Nearby Warm-Section Quadrupole Magnets of RAON Heavy Ion Accelerator”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 625-627.
- T. Shimano et al., “Design Study of a Superconducting SOR Facility”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 434-437.
- R. M. Hutcheon, F. P. Adams, P. Lucuta, J. E. McGregor, B. H. Smith, and M. S. de Jong, “Measurements of High-Temperature rf and Microwave Properties of Selected Aluminas and Ferrites Used in Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 795-798.
- N. Yu. Kazarinov, V. Aleksandrov, Y. Jongen, V. Shevtsov, and A. Tuzikov, “Axial Injection Beam Line of C400 Superconducting Cyclotron for Carbon Therapy”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP102, pp. 5020-5022.
- I. Boscolo et al., “Application of Ferroelectric Cathodes to Enhance the Ion Yield in the CAESAR Source at LNS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7B03, pp. 1631-1633.
- J.-P. Thiry and W. Hillert, “Lattice Matching with Elegant at ELSA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2690-2692.
- M. L. Seely, E. C. Bonnema, D. J. Carvelli, E. K. Cunningham, E. C. Kasper, and G. D. Korecky, “Fabrication of the Jefferson Laboratory Cryogenic Control Reservoirs”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP175, pp. 1157-1159.
- H. Kim, J. W. Choi, Y. W. Jo, W. K. Kim, Y. Kim, and M. Lee, “Operation Techniques for HWR1 Cryomodule”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2205-2207.
- T. Lef?¿vre et al., “First Beam Measurements with the LHC Synchrotron Light Monitors”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE057, pp. 1104-1106.
- O. Pinazza, A. Augustinus, P. M. Bond, P. Ch. Chochula, M. Lechman, and A. N. Kurepin, “Monitoring of the New ALICE Data Center Infrastructure: Going Wireless”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA122, pp. XX-XX.
- V. Malka, “Review of Laser Wakefield Accelerators”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOYBB101, pp. 11-15.
- D. Egger, A. E. Dabrowski, S. D?Âbert, T. Lef?¿vre, and O. Mete, “Design and Results of a Time Resolved Spectrometer for the 5 MeV Photoinjector for CTF3 PHIN”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE056, pp. 1101-1103.
- T. R. Furness et al., “Adaptive Collimator Design for Future Particle Accelerators”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 240-244.
- S. A. Martin et al., “Lifetime Studies for Polarized and Unpolarized Protons in COSY”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP097, pp. 5008-5010.
- J. F. Schmidt and W. Hillert, “Magnetic Field Parametrization for Efficient Spin Tracking with POLE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 808-810.
- S. Karabekyan, J. Pflueger, L. Lin, Y. T. Liu, and W. Wang, “Use of Automation in Commissioning Process of the Undulators of the European X-Ray Free Electron Laser”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 64-67.
- M. Fiorini et al., “Experimental Study of Crystal Channeling at CERN-SPS for Beam-halo Cleaning”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS022, pp. 1538-1540.
- J. Branlard and B. Chase, “Modeling the LLRF Control of a Multi-Cavity RF Station for Project-X”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3RAC05, pp. 1883-1885.
Back to search