Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Busby et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Electron Beam Amplifier”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP081, pp. 4497-4499.
[n] S. S. Serednyakov et al., “Control System for Magnet Power Supplies for Novosibirsk Free Electron Laser”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU021, pp. 480-482.
[n] S. Peggs et al., “The Rapid Cycling Medical Synchrotron, RCMS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI083, pp. 2754-2756.
[n] W. Graves et al., “Electron Beam Diagnostic Based on a Short Seeded FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP068, pp. XX-XX.
[n] C. M. Zimmer, D. Chabot, W. S. Colocho, Y. Ding, and J. Nelson, “Longitudinal Feedback for the LCLS-II Superconducting Linear Accelerator at SLAC”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 895-898. doi:10.18429/JACoW-ICALEPCS2023-TUPDP131
[n] H. Mais, F. Schmidt, and A. Wrulich, “Studies of Chaotic Behaviour in HERA Caused by Transverse Magnetic Multipole Fields”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2252-2255.
[n] M. P. Level, P. C. Marin, P. Nghiem, E. M. Sommer, and H. Zyngier, “Progress Report on Super-ACO”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 470-473.
[n] A. Kaukher, I. Krouptchenkov, B. Michalek, D. Noelle, and H. Tiessen, “XFEL Beam Loss Monitor System”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD43, pp. 401-403.
[n] S. Nagaitsev, J. Ruan, and J. K. Keung, “Laser Timing Jitter Measurements at the Fermilab A0 Photoinjector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP112, pp. 664-666.
[n] S. An et al., “The Acceleration and Extraction Simulation for Pulsed Beam with Different Phase Width for CYCIAE-100”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 25-27. doi:10.18429/JACoW-SAP2017-MOPH01
[n] Y. L. Zhao, S. Fu, and Z. Li, “The Implementation of Equipartitioning in the Proton Linac Code PADSC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA020, pp. 1766-1768.
[n] M. Taborelli et al., “Breakdown Studies for the CLIC Accelerating Structures”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP070, pp. 217-219.
[n] L. Liao, Q. Gu, M. Zhang, and M. H. Zhao, “Development of a Micro-Pulse Electron Gun Based Upon pi-Mode Dual-Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP132, pp. 367-369.
[n] Y. Zou et al., “Studies on beam injection system for Wuhan Advanced Light Source storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1176-1179. doi:10.18429/JACoW-IPAC2023-MOPM086
[n] G. Wei et al., “Vacuum system for Wuhan Advanced Light Source storage ring”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM041, unpublished.
[n] N. Merminga, R. Helm, J. Irwin, and R. D. Ruth, “Optimizing a Nonlinear Collimation System for Future Linear Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 219-222.
[n] S. L. Manikonda, M. Berz, and K. Makino, “A Highly Accurate 3-D Magnetic Field Solver”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOM2IS01, pp. 28-28.
[n] L. Walckiers et al., “Towards Series Measurements of the LHC Superconducting Dipole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P015, pp. 3377-3379.
[n] D. Gavela, I. Podadera, and F. Toral, “Calculation and Design of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3881-3883. doi:10.18429/JACoW-IPAC2014-THPRI050
[n] W. Liu, Y. Jiao, S. Wang, and Y. Zhao, “Generation of Coherent Attosecond X-ray Pulses in the Southern Advanced Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 237-240. doi:10.18429/JACoW-IPAC2021-MOPAB055
[n] V. V. Anashin et al., “The Damping Ring for Novosibirsk Phi- and B-Factories”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2022-2025.
[n] J. Roensch et al., “First Measurement Results from the Upgraded Low Energy Longgitudinal Phase Space Diagnostics at PITZ”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH038, pp. 330-333.
[n] C. Tennant et al., “Design of the SRF Driver ERL for the Jefferson Lab UV FEL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP173, pp. 2435-2437.
[n] H. W. Zhao et al., “SECRAL Status and First Beam Test at 24GHz”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOAK01, pp. 1-3.
[n] Y. L. Zhao, H. Geng, C. Meng, and F. Yan, “Beam Twiss Measurement With Ws Including Space Charge Effect”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 925-927. doi:10.18429/JACoW-IPAC2016-MOPOY032
[n] S. Rimjaem et al., “Recent Emittance Measurement Results for the Upgraded PITZ Facility”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC09, pp. 251-254.
[n] D. Filippetto et al., “Status of the APEX Beam Diagnostic and First Measurements”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR075, pp. 963-965.
[n] L. Torino and U. Iriso, “Filling Pattern Measurements at ALBA using Time Correlated Single Photon Counting”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3644-3646. doi:10.18429/JACoW-IPAC2014-THPME162
[n] A. P. Letchford, D. C. Faircloth, D. J. S. Findlay, M. Perkins, A. F. Stevens, and M. Whitehead, “Testing, Installation, Commissioning and First Operation of the ISIS RFQ Pre-Injector Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPC010, pp. 695-697.
[n] J. A. Nolen et al., “Design and Status of the Super Separator Spectrometer for the GANIL SPIRAL2 Project”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOB03, pp. 23-23.
[n] R. Connolly et al., “RHIC-Style IPMs in the Brookhaven AGS”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF02, pp. 39-41.
[n] T. Xu et al., “FRIB Cryomodule Design and Production”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 673-678. doi:10.18429/JACoW-LINAC2016-WE2A02
[n] E. Lessner, E. Crosbie, and S. Milton, “Effects of Vertical Girder Realignment in the Argonne APS Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP28, pp. 2325-2327.
[n] R. J. England et al., “A High Transformer Ratio Plasma Wakefield Accelerator Scheme for FACET”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP088, pp. 265-267.
[n] Z. Ni, L. Li, J. Liu, J. Luo, X. Zhou, and Y. Gao, “The Design of Intelligent Integrated Control Software Framework of Facilities for Scientific Experiments”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 131. doi:10.18429/JACoW-ICALEPCS2019-MOMPL007
[n] H. Grote, F. C. Iselin, E. Keil, and J. Niederer, “The MAD Program”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1292-1295.
[n] J. D. Schneider, D. D. Armstrong, L. L. Catlin, E. A. Meyer, H. L. Rutkowski, and B. A. Sherwood, “Development of a High-Current Deuteron Injector for the FMIT Facility”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-11, pp. 457-461.
[n] A. Schempp, “Overview of Recent RFQ Projects”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MO302, pp. 41-45.
[n] A. Plastun and P. Ostroumov, “Linear accelerator for a next generation rare isotope facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1733-1736. doi:10.18429/JACoW-IPAC2023-TUPA181
[n] M. Meng, Y. B. Chen, J. H. Wang, Y. L. Yang, and Z. R. Zhou, “Control and Analysis System for Digital Feedback in HLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE031, pp. 1038-1040.
[n] T. W. Aitken et al., “Progress of the RIST Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP083L, pp. 1522-1524.
[n] C. Bortolotto and P. Michelini, “The ELETTRA Control System Database”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1770-1773.
[n] D. S. Zhang et al., “Some Initial Results of Central Region Orbit Tracking for Superconducting Cyclotron CYCIAE-230”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 34-36. doi:10.18429/JACoW-SAP2017-MOPH04
[n] J. A. Waynert and F. C. Prenger, “A Thermal Analysis and Optimization of the APT 210 kW Power Coupler”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4077, pp. 950-952.
[n] J. W. Amann et al., “Design of an 18 MW Beam Dump for 500 GeV Electron/Positron Beams at an ILC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE003, pp. 3341-3343.
[n] K. Shipman, D. Patrick, M. Sanchez Barrueta, Q. Marksteiner, R. Hemphill, and H. Xu, “Magnetic focusing architecture for a compact electron buncher”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 153-155. doi:10.18429/JACoW-IPAC2024-MOPC41
[n] P. Zisopoulos, Y. Papaphilippou, A. Streun, and V. G. Ziemann, “Beam Optics Measurements through Turn by turn Beam Position Data in the SLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA067, pp. 2663-2665.
[n] M. Othman, D. Bizzozero, L. Ge, and C.-K. Ng, “Application of the nonlinear material solver in the ACE3P electromagnetic code suite”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS096, unpublished.
[n] S. Wang et al., “Proposal of the Southern Advanced Photon Source and Current Physics Design Study”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 300-303. doi:10.18429/JACoW-IPAC2021-MOPAB075
[n] A. Kurup and A. P. Letchford, “Electromagnetic Design of a Radio Frequency Quadrupole for the Front End Test Stand at RAL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH116, pp. 315-317.
[n] H. Burkhardt, S. Jakobsen, S. Redaelli, B. Salvachua, and G. Valentino, “Collimation Down to 2 Sigma in Special Physics Runs in the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI037, pp. 1427-1429.
[n] A. P. Letchford et al., “The RAL Front End Test Stand”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH112, pp. 303-305.
[n] S. Streiffer, “High power hadron linacs; the Spallation Neutron Source Proton Power Upgrade and a look to the future”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper FRYA003, unpublished.
[n] A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP051, pp. 3856-3858.
[n] R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822.
[n] V. Ayvazyan, G. M. Petrosyan, K. Rehlich, S. Simrock, and P. Vetrov, “RF Control System for the DESY VUV-FEL Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT046, pp. 2899-2901.
[n] Y. A. Cheng, A. Kurup, A. P. Letchford, J. K. Pozimski, and P. Savage, “RFQ Cold Model RF Measurements and Waveguide-to-Coaxial line Transition Design for the Front-End Test Stand at RAL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS002, pp. 1655-1657.
[n] P. Gessler et al., “Overview of Acquisition and Control Electronics and Concepts for Experiments and Beam Transport at the European XFEL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1561. doi:10.18429/JACoW-ICALEPCS2019-THAPP05
[n] J. V. Campelo, “Longitudinal Impedance Characterization of the CERN SPS Vacuum Flanges”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 363-365. doi:10.18429/JACoW-IPAC2015-MOPJE036
For LaTeX
Use Complete Form
For BibTeX
References
- R. Busby et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Electron Beam Amplifier”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP081, pp. 4497-4499.
- S. S. Serednyakov et al., “Control System for Magnet Power Supplies for Novosibirsk Free Electron Laser”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU021, pp. 480-482.
- S. Peggs et al., “The Rapid Cycling Medical Synchrotron, RCMS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI083, pp. 2754-2756.
- W. Graves et al., “Electron Beam Diagnostic Based on a Short Seeded FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP068, pp. XX-XX.
- C. M. Zimmer, D. Chabot, W. S. Colocho, Y. Ding, and J. Nelson, “Longitudinal Feedback for the LCLS-II Superconducting Linear Accelerator at SLAC”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP131, pp. 895-898.
- H. Mais, F. Schmidt, and A. Wrulich, “Studies of Chaotic Behaviour in HERA Caused by Transverse Magnetic Multipole Fields”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2252-2255.
- M. P. Level, P. C. Marin, P. Nghiem, E. M. Sommer, and H. Zyngier, “Progress Report on Super-ACO”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 470-473.
- A. Kaukher, I. Krouptchenkov, B. Michalek, D. Noelle, and H. Tiessen, “XFEL Beam Loss Monitor System”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD43, pp. 401-403.
- S. Nagaitsev, J. Ruan, and J. K. Keung, “Laser Timing Jitter Measurements at the Fermilab A0 Photoinjector”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP112, pp. 664-666.
- S. An et al., “The Acceleration and Extraction Simulation for Pulsed Beam with Different Phase Width for CYCIAE-100”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 25-27.
- Y. L. Zhao, S. Fu, and Z. Li, “The Implementation of Equipartitioning in the Proton Linac Code PADSC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA020, pp. 1766-1768.
- M. Taborelli et al., “Breakdown Studies for the CLIC Accelerating Structures”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP070, pp. 217-219.
- L. Liao, Q. Gu, M. Zhang, and M. H. Zhao, “Development of a Micro-Pulse Electron Gun Based Upon pi-Mode Dual-Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP132, pp. 367-369.
- Y. Zou et al., “Studies on beam injection system for Wuhan Advanced Light Source storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM086, pp. 1176-1179.
- G. Wei et al., “Vacuum system for Wuhan Advanced Light Source storage ring”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM041, unpublished.
- N. Merminga, R. Helm, J. Irwin, and R. D. Ruth, “Optimizing a Nonlinear Collimation System for Future Linear Colliders”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 219-222.
- S. L. Manikonda, M. Berz, and K. Makino, “A Highly Accurate 3-D Magnetic Field Solver”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOM2IS01, pp. 28-28.
- L. Walckiers et al., “Towards Series Measurements of the LHC Superconducting Dipole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P015, pp. 3377-3379.
- D. Gavela, I. Podadera, and F. Toral, “Calculation and Design of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3881-3883.
- W. Liu, Y. Jiao, S. Wang, and Y. Zhao, “Generation of Coherent Attosecond X-ray Pulses in the Southern Advanced Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 237-240.
- V. V. Anashin et al., “The Damping Ring for Novosibirsk Phi- and B-Factories”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2022-2025.
- J. Roensch et al., “First Measurement Results from the Upgraded Low Energy Longgitudinal Phase Space Diagnostics at PITZ”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH038, pp. 330-333.
- C. Tennant et al., “Design of the SRF Driver ERL for the Jefferson Lab UV FEL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP173, pp. 2435-2437.
- H. W. Zhao et al., “SECRAL Status and First Beam Test at 24GHz”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOAK01, pp. 1-3.
- Y. L. Zhao, H. Geng, C. Meng, and F. Yan, “Beam Twiss Measurement With Ws Including Space Charge Effect”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 925-927.
- S. Rimjaem et al., “Recent Emittance Measurement Results for the Upgraded PITZ Facility”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC09, pp. 251-254.
- D. Filippetto et al., “Status of the APEX Beam Diagnostic and First Measurements”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR075, pp. 963-965.
- L. Torino and U. Iriso, “Filling Pattern Measurements at ALBA using Time Correlated Single Photon Counting”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3644-3646.
- A. P. Letchford, D. C. Faircloth, D. J. S. Findlay, M. Perkins, A. F. Stevens, and M. Whitehead, “Testing, Installation, Commissioning and First Operation of the ISIS RFQ Pre-Injector Upgrade”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPC010, pp. 695-697.
- J. A. Nolen et al., “Design and Status of the Super Separator Spectrometer for the GANIL SPIRAL2 Project”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper MOB03, pp. 23-23.
- R. Connolly et al., “RHIC-Style IPMs in the Brookhaven AGS”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF02, pp. 39-41.
- T. Xu et al., “FRIB Cryomodule Design and Production”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 673-678.
- E. Lessner, E. Crosbie, and S. Milton, “Effects of Vertical Girder Realignment in the Argonne APS Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP28, pp. 2325-2327.
- R. J. England et al., “A High Transformer Ratio Plasma Wakefield Accelerator Scheme for FACET”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP088, pp. 265-267.
- Z. Ni, L. Li, J. Liu, J. Luo, X. Zhou, and Y. Gao, “The Design of Intelligent Integrated Control Software Framework of Facilities for Scientific Experiments”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 131.
- H. Grote, F. C. Iselin, E. Keil, and J. Niederer, “The MAD Program”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1292-1295.
- J. D. Schneider, D. D. Armstrong, L. L. Catlin, E. A. Meyer, H. L. Rutkowski, and B. A. Sherwood, “Development of a High-Current Deuteron Injector for the FMIT Facility”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-11, pp. 457-461.
- A. Schempp, “Overview of Recent RFQ Projects”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MO302, pp. 41-45.
- A. Plastun and P. Ostroumov, “Linear accelerator for a next generation rare isotope facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA181, pp. 1733-1736.
- M. Meng, Y. B. Chen, J. H. Wang, Y. L. Yang, and Z. R. Zhou, “Control and Analysis System for Digital Feedback in HLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE031, pp. 1038-1040.
- T. W. Aitken et al., “Progress of the RIST Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP083L, pp. 1522-1524.
- C. Bortolotto and P. Michelini, “The ELETTRA Control System Database”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1770-1773.
- D. S. Zhang et al., “Some Initial Results of Central Region Orbit Tracking for Superconducting Cyclotron CYCIAE-230”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 34-36.
- J. A. Waynert and F. C. Prenger, “A Thermal Analysis and Optimization of the APT 210 kW Power Coupler”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4077, pp. 950-952.
- J. W. Amann et al., “Design of an 18 MW Beam Dump for 500 GeV Electron/Positron Beams at an ILC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE003, pp. 3341-3343.
- K. Shipman, D. Patrick, M. Sanchez Barrueta, Q. Marksteiner, R. Hemphill, and H. Xu, “Magnetic focusing architecture for a compact electron buncher”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC41, pp. 153-155.
- P. Zisopoulos, Y. Papaphilippou, A. Streun, and V. G. Ziemann, “Beam Optics Measurements through Turn by turn Beam Position Data in the SLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA067, pp. 2663-2665.
- M. Othman, D. Bizzozero, L. Ge, and C.-K. Ng, “Application of the nonlinear material solver in the ACE3P electromagnetic code suite”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS096, this conference.
- S. Wang et al., “Proposal of the Southern Advanced Photon Source and Current Physics Design Study”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 300-303.
- A. Kurup and A. P. Letchford, “Electromagnetic Design of a Radio Frequency Quadrupole for the Front End Test Stand at RAL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH116, pp. 315-317.
- H. Burkhardt, S. Jakobsen, S. Redaelli, B. Salvachua, and G. Valentino, “Collimation Down to 2 Sigma in Special Physics Runs in the LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI037, pp. 1427-1429.
- A. P. Letchford et al., “The RAL Front End Test Stand”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH112, pp. 303-305.
- S. Streiffer, “High power hadron linacs; the Spallation Neutron Source Proton Power Upgrade and a look to the future”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper FRYA003, unpublished.
- A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP051, pp. 3856-3858.
- R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822.
- V. Ayvazyan, G. M. Petrosyan, K. Rehlich, S. Simrock, and P. Vetrov, “RF Control System for the DESY VUV-FEL Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT046, pp. 2899-2901.
- Y. A. Cheng, A. Kurup, A. P. Letchford, J. K. Pozimski, and P. Savage, “RFQ Cold Model RF Measurements and Waveguide-to-Coaxial line Transition Design for the Front-End Test Stand at RAL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS002, pp. 1655-1657.
- P. Gessler et al., “Overview of Acquisition and Control Electronics and Concepts for Experiments and Beam Transport at the European XFEL”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1561.
- J. V. Campelo, “Longitudinal Impedance Characterization of the CERN SPS Vacuum Flanges”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 363-365.
Back to search