Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. H. Helm, “Computation of the Properties of Traveling-Wave Linac Structures”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-5, pp. 279-291.
[n] T. Tajima, W. Horton, S. Singer, and K. Witte, “Pump Depletion and Laser Staging for Beat-Wave Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3542-3545.
[n] N. Agapov et al., “How a 100 TeV Synchrotron/Collider Based on the Nuclotron-type Cryomagnetic System Would Look”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP083G, pp. 410-414.
[n] R. Bossart, J. P. Papis, and V. Rossi, “Synchronous RF-Receivers for Beam Position and Intensity Measurements at the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1899-1902.
[n] J. P. Dai et al., “Development of an S-band RF Deflector at IHEP”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC24, pp. 301-303.
[n] J. Kewisch and M. Bickley, “The Star, a Dynamically Configured Dataflow Director for Realtime Control”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1835-1838.
[n] F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
[n] R. Cassel and M. Nguyen, “Kicker Pulser Charger”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3147-3150.
[n] S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197.
[n] I. M. Kapchinskij et al., “Drift Tubes for a Focusing Channel of Ion Linear Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1073-1076.
[n] Yu. A. Kubyshin, V. Blasco, J. A. Romero, A. Sanchez, G. Montoro, and V. I. Shvedunov, “Control System of a Miniature 12 MeV Race-Track Microtron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3165-3167. doi:10.18429/JACoW-IPAC2014-THPRO116
[n] J. R. Smith, W. Namkung, M. J. Rhee, and R. F. Schneider, “Emittance Analysis of Beam Propagation in Low Pressure Air”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1997-2000.
[n] C. D. Striffler and S. Y. Cai, “One-Dimensional Simulation Studies of Breakdown and Electron Beam Generation Processes for a Hollow Cathode Pseudospark Discharge”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3075-3078.
[n] K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3815-3818. doi:10.18429/JACoW-IPAC2017-THPAB047
[n] C. C. Lo, “The Phase Servo Tuner Control System of the ALS 500 MHz Cavity”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1142-1145.
[n] J. Rochez, E. B. Blanco Vinuela, M. Koutli, and T. Petrou, “Opening the Floor to PLCs and IPCs: CODESYS in UNICOS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC033, pp. 147-150.
[n] T. Tajima and J. M. Dawson, “An Electron Accelerator using a Laser”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4188-4190.
[n] M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848.
[n] W. F. Bergan et al., “Using High?¡ Precision Beam Position Monitors at the Cornell Electron Storage Ring (CESR) to Measure the One?¡ Way Speed of Light Anisotropy”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 399-401. doi:10.18429/JACoW-NAPAC2016-TUPOA57
[n] Z. Li, T. O. Raubenheimer, K. Bane, J. C. Sheppard, and R. H. Miller, “Parameter Optimization for the Low Frequency Linacs in the NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA44, pp. 3486-3488.
[n] G. Arduini et al., “LEP Performance at 91.5 GeV”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP20H, pp. 439-444.
[n] G. E. Lawler, J. I. Mann, J. B. Rosenzweig, R. J. Roussel, and V. S. Yu, “Initial Nanoblade-Enhanced Laser-Induced Cathode Emission Measurements”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2814-2817. doi:10.18429/JACoW-IPAC2021-WEPAB097
[n] A. V. Mishin, “Multiple Beam Coupled Cavity Concept and Structure”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP120G, pp. 816-818.
[n] M. Farkhondeh et al., “Magnetic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2868-2871.
[n] D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and G. Jamieson, “Beam Diagnostic Layout Requirements for SSCL Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2127-2130.
[n] S. Bartalucci et al., “Impedance and Beam Dynamics in DAPhiNE”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 804-807.
[n] G. Harris, Q. Ma, and D. R. Walters, “Coatings for the APS RF Cavity Tuners for the Reduction of Secondary Electrons”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA115, pp. 1342-1344.
[n] N. Sitaraman et al., “Ab Initio Calculations on the Growth and Superconducting Properties of Nb?Sn”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 39-43. doi:10.18429/JACoW-SRF2019-MOP010
[n] J. M. Byrd, W. C. Barry, G. D. Stover, and G. Huang, “Beam Transfer Function Diagnostics for Broadband Multibunch Feedback Systems”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI028, pp. 2064-2066.
[n] D. Xu et al., “Closing crab dispersion by dispersive RF cavity in Electron-Ion Collider Hadron Storage Ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 112-115. doi:10.18429/JACoW-IPAC2023-MOPA040
[n] Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1293-1296.
[n] D. T. Tran, “Bandwidth Broadening in RF-Structure”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2948-2951.
[n] E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
[n] N. Baboi, T. Hellert, L. Shi, T. Wamsat, R. M. Jones, and N. Y. Joshi, “HOM Characterization for Beam Diagnostics at the European XFEL Injector”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 616-619. doi:10.18429/JACoW-IBIC2016-WEPG03
[n] H. R. Shaylor, “Recharging Large Capacitor Banks”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-8, pp. 520-530.
[n] V. S. Yu, C. E. Hansel, G. E. Lawler, J. I. Mann, M. Mills, and J. B. Rosenzweig, “Magneto-Optical Trap Cathode for High Brightness Applications”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4466-4469. doi:10.18429/JACoW-IPAC2021-THPAB344
[n] L. Shirshov et al., “STABILITY STUDY OF HIGH-CURRENT SUPERCONDUCTING CABLES FOR ACCELERATOR MAGNETS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH02, pp. XX-XX.
[n] R. S. Lord et al., “Coupled Operation Experience at the Holifield Heavy Ion Research Facility”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2077-2080.
[n] J. F. DeFord and G. Kamin, “Application of Linear Magnetic Loss Model of Ferrite to Induction Cavity Simulation”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU430, pp. 384-386.
[n] O. J. Alford, L. R. Bertolini, A. C. Paul, C. C. Shang, and G. A. Westenskow, “The Mechanical Design for the Second Axis Beam Transport Line for the DARHT Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP125, pp. 3251-3253.
[n] R. L. Gluckstern, F. Neri, and R. K. Cooper, “Cumulative Beam Breakup with a Distribution of Deflecting Mode Frequencies”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-40, pp. 540-542.
[n] S. N. Lobo, M. Liepe, and T. E. Oseroff, “Magnetic Field Mapping System for Cornell Sample Host Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 961-963. doi:10.18429/JACoW-SRF2019-THP046
[n] A. Canabal et al., “Superconducting Materials Testing with a High-Q Copper RF Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS018, pp. 2370-2372.
[n] M. Schillo, “Global Industrial Development of Accelerators for Charged Particle Therapy”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1912-1916. doi:10.18429/JACoW-IPAC2014-WEIB01
[n] H. Huck, R. Burek, G. Schmidt, and K. Wille, “Improvement and Recent Results of the DELTA Storage Ring FEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC011, pp. 88-90.
[n] L. Solomon, J. Galayda, and C. Sylvester, “Magnetic Measurements of the XLS Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2116-2119.
[n] G. Orlandi, L. Picardi, C. Ronsivalle, and A. Vignati, “The TOP-ISS Linear Accelerator: A High Frequency Proton Linac for Therapy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP049G, pp. 2638-2640.
[n] R. N. Fernandes et al., “Management of IOCs at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1205. doi:10.18429/JACoW-ICALEPCS2019-WEPHA048
[n] Ch. Leemann et al., “A Heavy Ion Facility for Radiation Therapy”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 986-989.
[n] G. Raupp et al., “Experiment Management System for the ASDEX Upgrade Tokamak”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_013.
[n] E. W. Hoffman, “An Innovative Spin Precessor for Intermediate Energy Protons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3995-3997.
[n] M. J. Barnes, D. C. Fiander, and G. D. Wait, “Mathematical Modelling of the 1 MHz Beam Chopper for the Kaon Factory”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1275-1278.
[n] J. C. Dooling et al., “Studies of Beam Dumps in Candidate Horizontal Collimator Materials for the Advanced Photon Source Upgrade Storage Ring”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 128-131. doi:10.18429/JACoW-NAPAC2019-MOPLM14
[n] D. Garcia et al., “NaKSb photocathode tests in a high gradient S-band photoinjector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2126-2128. doi:10.18429/JACoW-IPAC2024-WEPC67
[n] J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2832-2835.
[n] A. Zholents et al., “Modification of the ALS Booster Synchrotron for an Experiment on Optical Stochastic Cooling”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W025, pp. 808-810.
[n] O. Berrig, C. Fischer, and H. Schmickler Geneva, “Measuring Beta-Functions with K-Modulation”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT08, pp. XX-XX.
[n] A. Ferrero Colomo, M. Barnes, A. del Barrio Montañés, T. Kramer, and J. Ruf, “Measurement and characterization of a toroidal tape wound nano-crystalline core for the 40kV Inductive adder development at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4356-4359. doi:10.18429/JACoW-IPAC2023-THPA165
[n] S. Peggs and V. Mane, “KRAKEN, a Numerical Model of RHIC Impedances”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC26, pp. 3137-3139.
[n] T. Hosokai et al., “Application of Fast Imploding Capillary Discharge for Laser Wakefield Acceleration”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA132, pp. 3690-3692.
[n] A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Simulation of Proton Beam Behaviour in High Energy Linac with Few-Gaps Resonators at Failure of One or Some of Them”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B02, pp. 830-832.
[n] K. Vodopivec, J. E. Breeding, and J. W. Sinclair, “The Linux Device Driver Framework for High-Throughput Lossless Data Streaming Applications”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 603. doi:10.18429/JACoW-ICALEPCS2019-MOPHA156
[n] C. Bocchetta, “Challenges of Linac Driven Light Sources”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper WE203, pp. 543-543.
[n] G. Brajnik, S. Carrato, S. Bassanese, G. Cautero, and R. De Monte, “A Novel Electron-BPM Front End With Sub-Micron Resolution Based on Pilot-Tone Compensation: Test Results With Beam”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 307-310. doi:10.18429/JACoW-IBIC2016-TUPG02
[n] P. Chitnis, T. G. Robertazzi, and K. A. Brown, “Understanding the Failure Characteristics of the Beam Permit System of RHIC at BNL”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 382-385. doi:10.18429/JACoW-ICALEPCS2015-MOPGF129
[n] B. Blind and A. J. Jason, “Chromatically Corrected Imaging Systems for Charged-Particle Radiography”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOAC002, pp. 225-229.
[n] T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913.
[n] F. Hoellering et al., “Beam Tests of the VE-RFQ Cyclotron Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA59, pp. 3519-3521.
[n] U. Krause, “Beam Diagnostics by X-Ray Spectroscopy at the Unilac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1941-1944.
[n] J. R. Harris, D. T. Blackfield, G. J. Caporaso, Y.-J. Chen, M. L. Krogh, and M. Sanders, “Vacuum Insulator Studies for the Dielectric Wall Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS014, pp. 2358-2360.
[n] C. K. Baribeau, L. O. Dallin, J. M. Helfrich, T. M. Pedersen, M. J. Sigrist, and W. A. Wurtz, “Simulated and Measured Magnetic Performance of a Double APPLE-II Undulator at the Canadian Light Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4025-4027. doi:10.18429/JACoW-IPAC2016-THPOW037
[n] Q. Z. Xing et al., “Present Status of the High Current Linac at Tsinghua University and Its Application”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 413-415. doi:10.18429/JACoW-HB2016-WEAM3Y01
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, M. Harvey, J. Morris, and R. H. Olsen, “A New Simulation Timing System for Software Testing in Collider-Accelerator Control Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 306. doi:10.18429/JACoW-ICALEPCS2019-MOPHA046
[n] N. Sitaraman et al., “Ab Initio Calculations on the Growth and Superconducting Properties of Nb?Sn”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 39-43. doi:10.18429/JACoW-SRF2019-MOP010
[n] H. Zhang et al., “BDSIM Simulation of the Complete Radionuclide Production Beam Line from Beam Splitter to Target Station at the PSI Cyclotron Facility”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 275-278. doi:10.18429/JACoW-CYCLOTRONS2019-WEB04
[n] S. De Silva, “Tolerance calculations for 197 MHz prototype crab cavity for EIC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPS36, unpublished.
[n] A. Harvey, “Tailored Vacuum Chambers for AC Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3815-3818.
[n] N. A. Ebrahim et al., “First Observations of Acceleration of Injected Electrons in a Laser Plasma Beatwave Experiment”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-44, pp. 553-556.
[n] B. Krietenstein, “Numerical simulations of IH accelerators with MAFIA and RF model measurements”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP75, pp. 243-245.
[n] M. Turenne, F. Hunte, R. P. Johnson, S. A. Kahn, J. Schwartz, and L. Ye, “Characterization of REBCO Coated Conductors for High Field Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB058, pp. 400-402.
[n] K. Jacobs, J. Flanz, and T. Russ, “Emittance Measurements at the Bates Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-43, pp. 421-423.
[n] W. Urbanus et al., “Simultaneous Transport of N+ and N+2 Beams through a F0D0 Channel”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-46, pp. 161-163.
[n] P. V. Livdahl, “ZGS Injector Observations”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART4-3, pp. 384-397.
[n] S. Littleton and T. Raubenheimer, “Wakefield effects on dark current bunches for LESA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 893-895. doi:10.18429/JACoW-IPAC2023-MOPL150
[n] X. Wu et al., “Mass production of 3.9 GHz 9-cell cavities at SHINE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2006-2009. doi:10.18429/JACoW-IPAC2024-WEPC21
[n] O. Ferrando and G. D'Auria, “Longitudinal Beam Dynamics Studies for the FERMI@ELETTRA Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC012, pp. 2999-3001.
[n] M. Fahmie, “Design of the Advanced Light Source Timing System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1869-1872.
[n] J-C. Tournier and E. Blanco Vinuela, “MONARC: Supervising the Archiving Infrastructure of CERN Control Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1112. doi:10.18429/JACoW-ICALEPCS2019-WEPHA019
[n] R. Maier et al., “The Superconducting Injector Linac for The Cooler-Synchrotron COSY at FZ-Juelich”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU482, pp. 506-508.
[n] D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, V. Skachkov, and A. Vetrov, “Development of a Permanent Magnet Residual Gas Profile Monitor With Fast Readout”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT100, pp. 2724-2726.
[n] G. P. Jackson and R. H. Siemann, “A Computer Simulation Study of ee- Storage Ring Performance as a Function of Sextupole Distribution”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2541-2544.
For LaTeX
Use Complete Form
For BibTeX
References
- R. H. Helm, “Computation of the Properties of Traveling-Wave Linac Structures”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-5, pp. 279-291.
- T. Tajima, W. Horton, S. Singer, and K. Witte, “Pump Depletion and Laser Staging for Beat-Wave Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3542-3545.
- N. Agapov et al., “How a 100 TeV Synchrotron/Collider Based on the Nuclotron-type Cryomagnetic System Would Look”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP083G, pp. 410-414.
- R. Bossart, J. P. Papis, and V. Rossi, “Synchronous RF-Receivers for Beam Position and Intensity Measurements at the CERN SPS Collider”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1899-1902.
- J. P. Dai et al., “Development of an S-band RF Deflector at IHEP”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC24, pp. 301-303.
- J. Kewisch and M. Bickley, “The Star, a Dynamically Configured Dataflow Director for Realtime Control”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1835-1838.
- F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
- R. Cassel and M. Nguyen, “Kicker Pulser Charger”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3147-3150.
- S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197.
- I. M. Kapchinskij et al., “Drift Tubes for a Focusing Channel of Ion Linear Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1073-1076.
- Yu. A. Kubyshin, V. Blasco, J. A. Romero, A. Sanchez, G. Montoro, and V. I. Shvedunov, “Control System of a Miniature 12 MeV Race-Track Microtron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3165-3167.
- J. R. Smith, W. Namkung, M. J. Rhee, and R. F. Schneider, “Emittance Analysis of Beam Propagation in Low Pressure Air”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1997-2000.
- C. D. Striffler and S. Y. Cai, “One-Dimensional Simulation Studies of Breakdown and Electron Beam Generation Processes for a Hollow Cathode Pseudospark Discharge”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3075-3078.
- K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3815-3818.
- C. C. Lo, “The Phase Servo Tuner Control System of the ALS 500 MHz Cavity”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1142-1145.
- J. Rochez, E. B. Blanco Vinuela, M. Koutli, and T. Petrou, “Opening the Floor to PLCs and IPCs: CODESYS in UNICOS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC033, pp. 147-150.
- T. Tajima and J. M. Dawson, “An Electron Accelerator using a Laser”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4188-4190.
- M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848.
- W. F. Bergan et al., “Using High?¡ Precision Beam Position Monitors at the Cornell Electron Storage Ring (CESR) to Measure the One?¡ Way Speed of Light Anisotropy”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 399-401.
- Z. Li, T. O. Raubenheimer, K. Bane, J. C. Sheppard, and R. H. Miller, “Parameter Optimization for the Low Frequency Linacs in the NLC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA44, pp. 3486-3488.
- G. Arduini et al., “LEP Performance at 91.5 GeV”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP20H, pp. 439-444.
- G. E. Lawler, J. I. Mann, J. B. Rosenzweig, R. J. Roussel, and V. S. Yu, “Initial Nanoblade-Enhanced Laser-Induced Cathode Emission Measurements”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2814-2817.
- A. V. Mishin, “Multiple Beam Coupled Cavity Concept and Structure”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP120G, pp. 816-818.
- M. Farkhondeh et al., “Magnetic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2868-2871.
- D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and G. Jamieson, “Beam Diagnostic Layout Requirements for SSCL Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2127-2130.
- S. Bartalucci et al., “Impedance and Beam Dynamics in DAPhiNE”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 804-807.
- G. Harris, Q. Ma, and D. R. Walters, “Coatings for the APS RF Cavity Tuners for the Reduction of Secondary Electrons”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA115, pp. 1342-1344.
- N. Sitaraman et al., “Ab Initio Calculations on the Growth and Superconducting Properties of Nb?Sn”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 39-43.
- J. M. Byrd, W. C. Barry, G. D. Stover, and G. Huang, “Beam Transfer Function Diagnostics for Broadband Multibunch Feedback Systems”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI028, pp. 2064-2066.
- D. Xu et al., “Closing crab dispersion by dispersive RF cavity in Electron-Ion Collider Hadron Storage Ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA040, pp. 112-115.
- Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1293-1296.
- D. T. Tran, “Bandwidth Broadening in RF-Structure”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2948-2951.
- E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
- N. Baboi, T. Hellert, L. Shi, T. Wamsat, R. M. Jones, and N. Y. Joshi, “HOM Characterization for Beam Diagnostics at the European XFEL Injector”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 616-619.
- H. R. Shaylor, “Recharging Large Capacitor Banks”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART5-8, pp. 520-530.
- V. S. Yu, C. E. Hansel, G. E. Lawler, J. I. Mann, M. Mills, and J. B. Rosenzweig, “Magneto-Optical Trap Cathode for High Brightness Applications”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4466-4469.
- L. Shirshov et al., “STABILITY STUDY OF HIGH-CURRENT SUPERCONDUCTING CABLES FOR ACCELERATOR MAGNETS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH02, pp. XX-XX.
- R. S. Lord et al., “Coupled Operation Experience at the Holifield Heavy Ion Research Facility”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2077-2080.
- J. F. DeFord and G. Kamin, “Application of Linear Magnetic Loss Model of Ferrite to Induction Cavity Simulation”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU430, pp. 384-386.
- O. J. Alford, L. R. Bertolini, A. C. Paul, C. C. Shang, and G. A. Westenskow, “The Mechanical Design for the Second Axis Beam Transport Line for the DARHT Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP125, pp. 3251-3253.
- R. L. Gluckstern, F. Neri, and R. K. Cooper, “Cumulative Beam Breakup with a Distribution of Deflecting Mode Frequencies”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-40, pp. 540-542.
- S. N. Lobo, M. Liepe, and T. E. Oseroff, “Magnetic Field Mapping System for Cornell Sample Host Cavity”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 961-963.
- A. Canabal et al., “Superconducting Materials Testing with a High-Q Copper RF Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS018, pp. 2370-2372.
- M. Schillo, “Global Industrial Development of Accelerators for Charged Particle Therapy”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1912-1916.
- H. Huck, R. Burek, G. Schmidt, and K. Wille, “Improvement and Recent Results of the DELTA Storage Ring FEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC011, pp. 88-90.
- L. Solomon, J. Galayda, and C. Sylvester, “Magnetic Measurements of the XLS Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2116-2119.
- G. Orlandi, L. Picardi, C. Ronsivalle, and A. Vignati, “The TOP-ISS Linear Accelerator: A High Frequency Proton Linac for Therapy”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP049G, pp. 2638-2640.
- R. N. Fernandes et al., “Management of IOCs at ESS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1205.
- Ch. Leemann et al., “A Heavy Ion Facility for Radiation Therapy”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 986-989.
- G. Raupp et al., “Experiment Management System for the ASDEX Upgrade Tokamak”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_013.
- E. W. Hoffman, “An Innovative Spin Precessor for Intermediate Energy Protons”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3995-3997.
- M. J. Barnes, D. C. Fiander, and G. D. Wait, “Mathematical Modelling of the 1 MHz Beam Chopper for the Kaon Factory”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1275-1278.
- J. C. Dooling et al., “Studies of Beam Dumps in Candidate Horizontal Collimator Materials for the Advanced Photon Source Upgrade Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 128-131.
- D. Garcia et al., “NaKSb photocathode tests in a high gradient S-band photoinjector”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC67, pp. 2126-2128.
- J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2832-2835.
- A. Zholents et al., “Modification of the ALS Booster Synchrotron for an Experiment on Optical Stochastic Cooling”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W025, pp. 808-810.
- O. Berrig, C. Fischer, and H. Schmickler Geneva, “Measuring Beta-Functions with K-Modulation”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT08, pp. XX-XX.
- A. Ferrero Colomo, M. Barnes, A. del Barrio Montañés, T. Kramer, and J. Ruf, “Measurement and characterization of a toroidal tape wound nano-crystalline core for the 40kV Inductive adder development at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA165, pp. 4356-4359.
- S. Peggs and V. Mane, “KRAKEN, a Numerical Model of RHIC Impedances”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC26, pp. 3137-3139.
- T. Hosokai et al., “Application of Fast Imploding Capillary Discharge for Laser Wakefield Acceleration”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA132, pp. 3690-3692.
- A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Simulation of Proton Beam Behaviour in High Energy Linac with Few-Gaps Resonators at Failure of One or Some of Them”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B02, pp. 830-832.
- K. Vodopivec, J. E. Breeding, and J. W. Sinclair, “The Linux Device Driver Framework for High-Throughput Lossless Data Streaming Applications”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 603.
- C. Bocchetta, “Challenges of Linac Driven Light Sources”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper WE203, pp. 543-543.
- G. Brajnik, S. Carrato, S. Bassanese, G. Cautero, and R. De Monte, “A Novel Electron-BPM Front End With Sub-Micron Resolution Based on Pilot-Tone Compensation: Test Results With Beam”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 307-310.
- P. Chitnis, T. G. Robertazzi, and K. A. Brown, “Understanding the Failure Characteristics of the Beam Permit System of RHIC at BNL”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 382-385.
- B. Blind and A. J. Jason, “Chromatically Corrected Imaging Systems for Charged-Particle Radiography”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WOAC002, pp. 225-229.
- T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913.
- F. Hoellering et al., “Beam Tests of the VE-RFQ Cyclotron Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA59, pp. 3519-3521.
- U. Krause, “Beam Diagnostics by X-Ray Spectroscopy at the Unilac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1941-1944.
- J. R. Harris, D. T. Blackfield, G. J. Caporaso, Y.-J. Chen, M. L. Krogh, and M. Sanders, “Vacuum Insulator Studies for the Dielectric Wall Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS014, pp. 2358-2360.
- C. K. Baribeau, L. O. Dallin, J. M. Helfrich, T. M. Pedersen, M. J. Sigrist, and W. A. Wurtz, “Simulated and Measured Magnetic Performance of a Double APPLE-II Undulator at the Canadian Light Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4025-4027.
- Q. Z. Xing et al., “Present Status of the High Current Linac at Tsinghua University and Its Application”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 413-415.
- Y. Gao, T. G. Robertazzi, K. A. Brown, M. Harvey, J. Morris, and R. H. Olsen, “A New Simulation Timing System for Software Testing in Collider-Accelerator Control Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 306.
- N. Sitaraman et al., “Ab Initio Calculations on the Growth and Superconducting Properties of Nb?Sn”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 39-43.
- H. Zhang et al., “BDSIM Simulation of the Complete Radionuclide Production Beam Line from Beam Splitter to Target Station at the PSI Cyclotron Facility”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 275-278.
- S. De Silva, “Tolerance calculations for 197 MHz prototype crab cavity for EIC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS36, unpublished.
- A. Harvey, “Tailored Vacuum Chambers for AC Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3815-3818.
- N. A. Ebrahim et al., “First Observations of Acceleration of Injected Electrons in a Laser Plasma Beatwave Experiment”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-44, pp. 553-556.
- B. Krietenstein, “Numerical simulations of IH accelerators with MAFIA and RF model measurements”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP75, pp. 243-245.
- M. Turenne, F. Hunte, R. P. Johnson, S. A. Kahn, J. Schwartz, and L. Ye, “Characterization of REBCO Coated Conductors for High Field Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB058, pp. 400-402.
- K. Jacobs, J. Flanz, and T. Russ, “Emittance Measurements at the Bates Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-43, pp. 421-423.
- W. Urbanus et al., “Simultaneous Transport of N+ and N+2 Beams through a F0D0 Channel”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-46, pp. 161-163.
- P. V. Livdahl, “ZGS Injector Observations”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART4-3, pp. 384-397.
- S. Littleton and T. Raubenheimer, “Wakefield effects on dark current bunches for LESA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL150, pp. 893-895.
- X. Wu et al., “Mass production of 3.9 GHz 9-cell cavities at SHINE”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC21, pp. 2006-2009.
- O. Ferrando and G. D'Auria, “Longitudinal Beam Dynamics Studies for the FERMI@ELETTRA Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC012, pp. 2999-3001.
- M. Fahmie, “Design of the Advanced Light Source Timing System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1869-1872.
- J-C. Tournier and E. Blanco Vinuela, “MONARC: Supervising the Archiving Infrastructure of CERN Control Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1112.
- R. Maier et al., “The Superconducting Injector Linac for The Cooler-Synchrotron COSY at FZ-Juelich”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU482, pp. 506-508.
- D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, V. Skachkov, and A. Vetrov, “Development of a Permanent Magnet Residual Gas Profile Monitor With Fast Readout”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT100, pp. 2724-2726.
- G. P. Jackson and R. H. Siemann, “A Computer Simulation Study of ee- Storage Ring Performance as a Function of Sextupole Distribution”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2541-2544.
Back to search